Nut upsuser - Apr 2006 - SOS : Help needed for UPS Centralion Blazer 2000VA USB

-----BEGIN PGP SIGNED MESSAGE-----

Hello,

I leave a mail here because I can't find any solution in order to get the
nut working with this UPS despite I search everywhere on the net.

I've bought this UPS recently after that an MGE-UPS Ellipse 1200 USB burn.

I've those information about the UPS :

Reseller link : http://www.alpha-power-technologie.com/images/GPi-usb.pdf

In his catalogue, the product is called Global Power GPi-2000BZ

This UPS has monitoring software called Winpower
2.0(http://www.ups-software-download.com/) which is developed by
Centralion.

My system is a Debian Sarge 3.1 with a 2.4.32 kernel and built-in HID USB
support. (this kernel was working perfectly well with the MGE-UPS HID UPS
Ellipse 1200 and nut driver newhidups)

I've tried to set up winpower under debian but get an RMI server failure at
boot. I also see that the setup script wasn't set correctly for Debian,
even
after fixed PATH variables and right rc.d scripts...

So I went back on nut and tried to solve this problem.

On the Centralion Web site I found an UPS that seems to be the same as mine
(blazer 2000VA Spec.
http://www.centralion.com/html/product/back-Product-ups-blazer1000-spec.htm
and brochure
http://www.centralion.com/dm-download/Blazer1-2K/Blazer1K-2K.zip)

This UPS use megatec protocol over USB I think. Below are details catch
from the console :

When I plug the UPS on the USB port I get :
# lsusb
Bus 003 Device 005: ID 0665:5161

If I do cat /dev/usb/hiddev0 the system seems to be reading on the device
but no characters appears on the console...

If I unplug the UPS the cat /dev/usb/hiddev0 command stop working so I
think the system see the UPS on this device.

The usbview show me this on the device :

USB to Serial
Manufacturer: Cypress Semiconductor
Speed: 1,5 Mb/s (low)
USB Version: 1.10
Device Class: 00(ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 0665
Product Id: 5161
Revision Number:0.02

Config Number: 1
	Number of Interfaces: 1
	Attributes: 80
	MaxPower Needed: 100mA

	Interface Number: 0
		Name: hid
		Alternate Number: 0
		Class: 03(HID )
		Sub Class: 0
		Protocol: 0
		Number of Endpoints: 1

			Endpoint Adderss: 81
			Direction: in
			Attribute: 3
			Type: Int.
			Max Packet Size: 8
			Interval: 32ms

If someone could help me, it'll be really nice, as I've tried newhidups
-
fentoups - energized drivers without success.

I think my problem come from the USB to serial chipset from Cypress which
is not included into newhidups but it's out of what I can manage.

Best regards,

Guillaume JAOUEN.

-----BEGIN PGP SIGNATURE-----
Version: PGP Desktop 9.0.2 (Build 2424)
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Gya8
-----END PGP SIGNATURE-----

bonjour Guillaume,

2006/4/11, Guillaume JAOUEN
<guillaume.jaouen@rlconsultant.fr>:
> -----BEGIN PGP SIGNED MESSAGE-----
>
> Hello,
>
> I leave a mail here because I can't find any solution in order to get
the
> nut working with this UPS despite I search everywhere on the net.
>
> I've bought this UPS recently after that an MGE-UPS Ellipse 1200 USB
burn.
2 questions:
- what do you mean exactly by "bum"?
- were unsatisfied with Ellipse, and more generally with MGE, to
switch to another brand?
> I've those information about the UPS :
>
> Reseller link : http://www.alpha-power-technologie.com/images/GPi-usb.pdf
>
> In his catalogue, the product is called Global Power GPi-2000BZ
>
> This UPS has monitoring software called Winpower
> 2.0(http://www.ups-software-download.com/) which is developed by
> Centralion.
>
> My system is a Debian Sarge 3.1 with a 2.4.32 kernel and built-in HID USB
> support. (this kernel was working perfectly well with the MGE-UPS HID UPS
> Ellipse 1200 and nut driver newhidups)
>
> I've tried to set up winpower under debian but get an RMI server
failure at
> boot. I also see that the setup script wasn't set correctly for Debian,
> even
> after fixed PATH variables and right rc.d scripts...
>
> So I went back on nut and tried to solve this problem.
>
> On the Centralion Web site I found an UPS that seems to be the same as mine
> (blazer 2000VA Spec.
> http://www.centralion.com/html/product/back-Product-ups-blazer1000-spec.htm
> and brochure
> http://www.centralion.com/dm-download/Blazer1-2K/Blazer1K-2K.zip)
>
> This UPS use megatec protocol over USB I think. Below are details catch
> from the console :
>
> When I plug the UPS on the USB port I get :
> # lsusb
> Bus 003 Device 005: ID 0665:5161
>
> If I do cat /dev/usb/hiddev0 the system seems to be reading on the device
> but no characters appears on the console...
>
> If I unplug the UPS the cat /dev/usb/hiddev0 command stop working so I
> think the system see the UPS on this device.
>
> The usbview show me this on the device :
>
> USB to Serial
> Manufacturer: Cypress Semiconductor
> Speed: 1,5 Mb/s (low)
> USB Version: 1.10
> Device Class: 00(ifc )
> Device Subclass: 00
> Device Protocol: 00
> Maximum Default Endpoint Size: 8
> Number of Configurations: 1
> Vendor Id: 0665
> Product Id: 5161
> Revision Number:0.02
>
> Config Number: 1
>         Number of Interfaces: 1
>         Attributes: 80
>         MaxPower Needed: 100mA
>
>         Interface Number: 0
>                 Name: hid
>                 Alternate Number: 0
>                 Class: 03(HID )
>                 Sub Class: 0
>                 Protocol: 0
>                 Number of Endpoints: 1
>
>                         Endpoint Adderss: 81
>                         Direction: in
>                         Attribute: 3
>                         Type: Int.
>                         Max Packet Size: 8
>                         Interval: 32ms
>
> If someone could help me, it'll be really nice, as I've tried
newhidups -
> fentoups - energized drivers without success.
for serial, there is a blazer driver that will be replaced by megatec
(only available from subversion).

for usb, you might try newhidups in generic mode (-x generic), with
debug enabled (-DDD)

Arnaud
--
Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
OpenSource Developer - http://arnaud.quette.free.fr/

That hardware doesn't have a serial port right?

I think that UPS could be supported if only one could configure a
"ttyUSB" with that serial-usb converter.

I (temporarily) have a model with an USB port here, and I would like
to see if I could get it to work with "megatec"/"powermust"
without
resorting to some HID/USB magic...

The protocol used seems to be the same, so the only thing needed is to
configure a emulated serial port. Anyone has any ideas?

On 4/11/06, Guillaume JAOUEN <guillaume.jaouen@rlconsultant.fr>
wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
>
> Hello,
>
> I leave a mail here because I can't find any solution in order to get
the
> nut working with this UPS despite I search everywhere on the net.
>
> I've bought this UPS recently after that an MGE-UPS Ellipse 1200 USB
burn.
>
> I've those information about the UPS :
>
> Reseller link : http://www.alpha-power-technologie.com/images/GPi-usb.pdf
>
> In his catalogue, the product is called Global Power GPi-2000BZ
>
> This UPS has monitoring software called Winpower
> 2.0(http://www.ups-software-download.com/) which is developed by
> Centralion.
>
> My system is a Debian Sarge 3.1 with a 2.4.32 kernel and built-in HID USB
> support. (this kernel was working perfectly well with the MGE-UPS HID UPS
> Ellipse 1200 and nut driver newhidups)
>
> I've tried to set up winpower under debian but get an RMI server
failure at
> boot. I also see that the setup script wasn't set correctly for Debian,
> even
> after fixed PATH variables and right rc.d scripts...
>
> So I went back on nut and tried to solve this problem.
>
> On the Centralion Web site I found an UPS that seems to be the same as mine
> (blazer 2000VA Spec.
> http://www.centralion.com/html/product/back-Product-ups-blazer1000-spec.htm
> and brochure
> http://www.centralion.com/dm-download/Blazer1-2K/Blazer1K-2K.zip)
>
> This UPS use megatec protocol over USB I think. Below are details catch
> from the console :
>
> When I plug the UPS on the USB port I get :
> # lsusb
> Bus 003 Device 005: ID 0665:5161
>
> If I do cat /dev/usb/hiddev0 the system seems to be reading on the device
> but no characters appears on the console...
>
> If I unplug the UPS the cat /dev/usb/hiddev0 command stop working so I
> think the system see the UPS on this device.
>
> The usbview show me this on the device :
>
> USB to Serial
> Manufacturer: Cypress Semiconductor
> Speed: 1,5 Mb/s (low)
> USB Version: 1.10
> Device Class: 00(ifc )
> Device Subclass: 00
> Device Protocol: 00
> Maximum Default Endpoint Size: 8
> Number of Configurations: 1
> Vendor Id: 0665
> Product Id: 5161
> Revision Number:0.02
>
> Config Number: 1
>         Number of Interfaces: 1
>         Attributes: 80
>         MaxPower Needed: 100mA
>
>         Interface Number: 0
>                 Name: hid
>                 Alternate Number: 0
>                 Class: 03(HID )
>                 Sub Class: 0
>                 Protocol: 0
>                 Number of Endpoints: 1
>
>                         Endpoint Adderss: 81
>                         Direction: in
>                         Attribute: 3
>                         Type: Int.
>                         Max Packet Size: 8
>                         Interval: 32ms
>
> If someone could help me, it'll be really nice, as I've tried
newhidups -
> fentoups - energized drivers without success.
>
> I think my problem come from the USB to serial chipset from Cypress which
> is not included into newhidups but it's out of what I can manage.
>
> Best regards,
>
> Guillaume JAOUEN.
>
> -----BEGIN PGP SIGNATURE-----
> Version: PGP Desktop 9.0.2 (Build 2424)
>
> iQIVAwUBRDvh/IBhxpjgV9LlAQHhohAAjMCjEVWlbDSiCQohipHPVZ0sEplQX6Ef
> VhgwxadPwC1oPJ1HHlOiUelOAx1GQ9IDhxizBI7bGd4N5+njRbzRAw+aGZjXH4jA
> IPAoz9aNpEuirBunA1etk10o4eIiiYH3rAoCiWhDLzNnoIa7tAyr9RPVLR6ff4HY
> VzUDve6INIuKOzH1LaLvgYab3ZzzoG//A2eyoA03a7dRsXfgVwqL5nYYDXQdWVDm
> R/hru9NP14/SquT5I9jKjqoASnyJG0+p93b/7y3JvkC6ELARqNCzvQXozDlf8InE
> r0WOPiBh43lMH3OXTD6EF2/JViRfOG4Ybt0Cb+HO0BRQQ1MIeigjUIs17ivvZxFI
> KEvSV03LHhmbGPUqgiyCow6jRB1bxhaA8bDHj2GnyoYUfLFxsHtEbAJ9ZAQwygUA
> o88KxCRpvB9v4RRE+ZB4dJerlGPpZ42pUbtm+rxV3U9IDzaK85t83VJlJpeBczo9
> 8BlS9rtC21ocpi3B6fKo1FnEnSiGVozfmLzYi7lFruGNvu5iA38F6nFrp/p9mt8I
> ZC1OPzy0cXdXyDZHP3C7Kt4j/A+pyDTqA9H7y3Cy1x1YUWleqW/xMMcVLziKSMQp
> yXnbLytjJWmblRvQSdvc6+1IlKWZuiYKiOd4w/MOdDPdZTqL54pPkVyydzyfY8NN
> y749+rz/+aY> =Gya8
> -----END PGP SIGNATURE-----
>
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser@lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
>

--
Carlos Rodrigues