llvm dev - Sep 2019 - [cfe-dev] CFG simplification question, and preservation of branching in the original code

On Mon, Sep 30, 2019 at 11:52 AM Joan Lluch <joan.lluch at icloud.com>
wrote:
>
> Hi Roman,
>
> Is "test" actually an implementation of a 64-bit-wide
multiplication
> compiler-rt builtin?
> Then i'd think the main problem is that it is being optimized in the
> first place, you could end up with endless recursion…
>
>
> No, this is not a compiler-rt builtin. My example is of course incidentally
taken from the implementation of a signed multiply, but as said, it has nothing
to do with rt-builtins, I'm just using that code to show the issue. This
function can’t create a recursion because it’s named ’test’, unlike any
rt-buitin. You can replace the multiply in the source code by an addition, if
you want to avoid calling rt-functions, but this does not change what I attempt
to show. Also It’s not meant to be 64 bit wide, but 32 bit wide, because the
targets I’m testing are 16 bit, so ints are 16 bit and longs are 32 bit. This is
again the function I am testing:
>
>
> long test (long a, long b)
> {
>   int neg = 0;
>   long res;
>
>   if (a < 0)
>   {
>     a = -a;
>     neg = 1;
>   }
>
>   if (b < 0)
>   {
>     b = -b;
>     neg = !neg;
>   }
>
>   res = a*b;
>
>   if (neg)
>     res = -res;
>
>   return res;
> }
>
>
>
> LLVM, not clang.
>
>
> I’m not sure about what you mean by that. The shown LLVM IR code is created
by executing "clang” command line, so that’s what I attempt to show.
Not exactly, this is IR after optimizations, this is not what clang produces.
To see what clang produces you want to pass -O0.
All optimizations beyond that are done by LLVM.
> So it’s actually the front-end that does such undesired optimisations
sometimes, not only the LLVM back-end. This is in part why I am saying this is
not right. See copied again the IR code that gets generated for the C code that
I posted before. This IR code, including the presence of expensive shifts (
%a.lobit = lshr i32 %a, 31)  is generated when -mllvm
-phi-node-folding-threshold=1 is specified in the command line, or when the
Target implements getOperationCost(unsigned Opcode, Type *Ty, Type *OpTy) to
return TCC_Expensive for operator types that are bigger than the default target
register size.
>
>
>
> ; ModuleID = 'main.c'
> source_filename = "main.c"
> target datalayout =
"e-m:e-p:16:16-i32:16-i64:16-f32:16-f64:16-a:8-n8:16-S16"
> target triple = "msp430"
>
> ; Function Attrs: norecurse nounwind optsize readnone
> define dso_local i32 @test(i32 %a, i32 %b) local_unnamed_addr #0 {
> entry:
>   %cmp = icmp slt i32 %a, 0
>   %sub = sub nsw i32 0, %a
>   %spec.select = select i1 %cmp, i32 %sub, i32 %a
>   %a.lobit = lshr i32 %a, 31
>   %0 = trunc i32 %a.lobit to i16
>   %cmp1 = icmp slt i32 %b, 0
>   br i1 %cmp1, label %if.then2, label %if.end4
>
> if.then2:                                         ; preds = %entry
>   %sub3 = sub nsw i32 0, %b
>   %1 = xor i16 %0, 1
>   br label %if.end4
>
> if.end4:                                          ; preds = %if.then2,
%entry
>   %b.addr.0 = phi i32 [ %sub3, %if.then2 ], [ %b, %entry ]
>   %neg.1 = phi i16 [ %1, %if.then2 ], [ %0, %entry ]
>   %mul = mul nsw i32 %b.addr.0, %spec.select
>   %tobool5 = icmp eq i16 %neg.1, 0
>   %sub7 = sub nsw i32 0, %mul
>   %spec.select18 = select i1 %tobool5, i32 %mul, i32 %sub7
>   ret i32 %spec.select18
> }
>
> attributes #0 = { norecurse nounwind optsize readnone
"correctly-rounded-divide-sqrt-fp-math"="false"
"disable-tail-calls"="false"
"less-precise-fpmad"="false"
"min-legal-vector-width"="0"
"no-frame-pointer-elim"="false"
"no-infs-fp-math"="false"
"no-jump-tables"="false"
"no-nans-fp-math"="false"
"no-signed-zeros-fp-math"="false"
"no-trapping-math"="false"
"stack-protector-buffer-size"="8"
"unsafe-fp-math"="false"
"use-soft-float"="false" }
>
> !llvm.module.flags = !{!0}
> !llvm.ident = !{!1}
>
> !0 = !{i32 1, !"wchar_size", i32 2}
> !1 = !{!"clang version 9.0.0 (https://github.com/llvm/llvm-project.git
6f7deba43dd25fb7b3eca70f9c388ec9174f455a)"}
>
>
>
> As you can see, Clang produces a 31 bit wide shift right ( %a.lobit = lshr
i32 %a, 31) That’s the fourth instruction on the IR code above. So a shift is
produced instead of creating a jump to a new block, as it should be the case as
per the C source code.
>
> Just as a matter of information. This is the implementation of the
getOperationCost function that causes ‘clang’ to correctly replace selects by
branches (desirable), but to generate shifts to fold expensive selects
(undesirable)
>
>
> unsigned CPU74TTIImpl::getOperationCost(unsigned Opcode, Type *Ty, Type
*OpTy)
> {
>   // Big types are expensive
>   unsigned OpSize = Ty->getScalarSizeInBits();
>   if ( OpSize > 16 )
>     return TTI::TCC_Expensive;
>
>   return BaseT::getOperationCost(Opcode, Ty, OpTy);
> }
>
> If the getOperationCost above function was not implemented, then clang
would generate the usual series of ‘selects’. But this is even worse because
selects imply speculative execution of expensive instructions, or duplicate
branching created by the backend, which can’t be easily avoided.
>
> Ideally, the IR code above should just place an ‘if.then' block for the
if (a < 0) statement in the C source code, instead of attempting to replace a
select by a shift (!)
>
> If you want to play with these two scenarios, (1) IR code generated with
branches, and (2) IR code generated with selects. This can easily be reproduced
for the MSP430 target by compiling with the following options
> (1)  -mllvm -phi-node-folding-threshold=1 -c -S -Os
> (2)  -mllvm -phi-node-folding-threshold=2 -c -S -Os
>
> For 16 bit targets without selects, or expensive selects, the overall code
is better with (1) because that prevents the creation of a different jump for
every ‘select’ that (2) would cause. However, the presence of the ‘shift’
instruction for (1) spoils it all.
>
> Again, ideally, the use of shifts as a replacement of selects should be
avoided, and an “if.then" block should be used as per the original C code.
>
> I hope this is clear now.
>
> John.
>
>
> On 29 Sep 2019, at 15:57, Roman Lebedev <lebedev.ri at gmail.com>
wrote:
>
> On Sun, Sep 29, 2019 at 3:35 PM Joan Lluch via llvm-dev
> <llvm-dev at lists.llvm.org> wrote:
>
>
> Hi Sanjay,
>
> Actually, the CodeGenPrepare::optimizeSelectInst is not doing the best it
could do in some circumstances: The case of “OptSize" for targets not
supporting Select was already mentioned to be detrimental.
>
> For targets that actually have selects, but branches are cheap and
generally profitable, particularly for expensive operators, the
optimizeSelectInst function does not do good either. The function tries to
identify consecutive selects with the same condition in order to avoid duplicate
branches, which is ok, but then this effort is discarded in
isFormingBranchFromSelectProfitable because the identified condition is used
more than once (on the said two consecutive selects, of course), which defeats
the whole purpose of checking for them, resulting in poor codegen.
>
> Yet another issue is that Clang attempts to replace ‘selects’ in the source
code, by supposedly optimised code that is not ok for all targets. One example
is this:
>
> LLVM, not clang.
>
> long test (long a, long b)
> {
>  int neg = 0;
>  long res;
>
>  if (a < 0)
>  {
>    a = -a;
>    neg = 1;
>  }
>
>  if (b < 0)
>  {
>    b = -b;
>    neg = !neg;
>  }
>
>  res = a*b; //(unsigned long)a / (unsigned long)b;  // will call __udivsi3
>
>  if (neg)
>    res = -res;
>
>  return res;
> }
>
>
> This gets compiled into
>
> ; Function Attrs: norecurse nounwind readnone
> define dso_local i32 @test(i32 %a, i32 %b) local_unnamed_addr #0 {
> entry:
>  %cmp = icmp slt i32 %a, 0
>  %sub = sub nsw i32 0, %a
>  %a.addr.0 = select i1 %cmp, i32 %sub, i32 %a
>  %a.lobit = lshr i32 %a, 31
>  %0 = trunc i32 %a.lobit to i16
>  %cmp1 = icmp slt i32 %b, 0
>  br i1 %cmp1, label %if.then2, label %if.end4
>
> if.then2:                                         ; preds = %entry
>  %sub3 = sub nsw i32 0, %b
>  %1 = xor i16 %0, 1
>  br label %if.end4
>
> if.end4:                                          ; preds = %if.then2,
%entry
>  %b.addr.0 = phi i32 [ %sub3, %if.then2 ], [ %b, %entry ]
>  %neg.1 = phi i16 [ %1, %if.then2 ], [ %0, %entry ]
>  %mul = mul nsw i32 %b.addr.0, %a.addr.0
>  %tobool5 = icmp eq i16 %neg.1, 0
>  %sub7 = sub nsw i32 0, %mul
>  %res.0 = select i1 %tobool5, i32 %mul, i32 %sub7
>  ret i32 %res.0
> }
>
> The offending part here is this:  %a.lobit = lshr i32 %a, 31 . Instead of
just creating a “select” instruction, as the original code suggested with the if
(a < 0) { neg = 1;} statements, the front-end produces a lshr which is very
expensive for small architectures, and makes it very difficult for the backend
to fold it again into an actual select (or branch). In my opinion, the original
C code should have produced a “select” and give the backend the opportunity to
optimise it if required. I think that the frontend should perform only target
independent optimisations.
>
>
> You didn't specify how you compile that code.
> We could also get: https://godbolt.org/z/B-5lj1
> Which can actually be folded further to just
>  long test(long a, long b) {
>    return a * b;
>  }
> Is "test" actually an implementation of a 64-bit-wide
multiplication
> compiler-rt builtin?
> Then i'd think the main problem is that it is being optimized in the
> first place, you could end up with endless recursion...
>
> I posted before my view that LLVM is clearly designed to satisfy big boys
such as the x86 and ARM targets. This means that, unfortunately, it makes too
many general assumptions about what’s cheap, without providing enough hooks to
cancel arbitrary optimisations. As I am implementing backends for 8 or 16 bit
targets, I find myself doing a lot of work just to reverse optimisations that
should have not been applied in the first place. My example above is an instance
of a code mutation performed by the frontend that is not desirable. Existing 8
and 16 bit trunk targets (particularly the MSP430 and the AVR) are also
negatively affected by the excessively liberal use of shifts by LLVM.
>
> The CodeGenPrepare::optimizeSelectInst function needs some changes to
respect targets with no selects, and targets that may want to avoid expensive
speculative executions.
>
> John
>
> Roman
>
> On 25 Sep 2019, at 16:00, Sanjay Patel <spatel at rotateright.com>
wrote:
>
> Changing the order of the checks in CodeGenPrepare::optimizeSelectInst()
sounds good to me.
>
> But you may need to go further for optimum performance. For example, we may
be canonicalizing math/logic IR patterns into 'select' such as in the
recent:
> https://reviews.llvm.org/D67799
>
> So if you want those to become ALU ops again rather than branches, then you
need to do the transform later in the backend. That is, you want to let
DAGCombiner run its set of transforms on 'select' nodes.
>
> On Wed, Sep 25, 2019 at 4:03 AM Joan Lluch via cfe-dev <cfe-dev at
lists.llvm.org> wrote:
>
>
> Hi Craig,
>
> Thank you for your reply. I have started looking at “CodeGenPrepare” and I
assume you reffer to CodeGenPrepare::optimizeSelectInst. I will try to play a
bit with that possibly later today. At first glance, it looks to me that for
targets that do not support ’select’ at all, the fact that the function exits
early for ‘OptSize’ can be detrimental, because this will just leave ALL
existing selects in the code anyway. As said, I will try to play with that
later, but right now it looks to me that maybe we should check  for
TLI->isSelectSupported earlier in the function, to get some more
opportunities to such targets without explicit ’select’ support?
>
> Thanks
>
> John
>
>
> On 25 Sep 2019, at 08:59, Craig Topper <craig.topper at gmail.com>
wrote:
>
> There is code in CodeGenPrepare.cpp that can turn selects into branches
that tries to account for multiple selects sharing the same condition. It
doesn't look like either AVR or MSP430 enable that code though.
>
> ~Craig
>
>
> On Tue, Sep 24, 2019 at 11:27 PM Joan Lluch via cfe-dev <cfe-dev at
lists.llvm.org> wrote:
>
>
> Hi Roman,
>
> Thank you for your reply. I understand your point. I just want to add
something to clarify my original post in relation to your reply.
>
> There are already implemented 8-bit and 16-bit backends, namely the AVR and
the MSP430, which already "aggressively convert selects into branches”,
which already benefit (as they are) from setting
"phi-node-folding-threshold’ to 1 or zero. This is because otherwise Clang
will generate several selects depending on the same “icmp”. These backends are
unable to optimise that, and they just create a comparison and a conditional
branch for every “select” in the IR code, in spite that the original C code was
already written in a much better way. So the resulting effect is the presence of
redundant comparisons and branches in the final code, with a detrimental of
generated code quality.
>
> The above gets improved by setting "phi-node-folding-threshold’ to 1
because some of these extra ‘selects' are no longer there so the backend
stops generating redundant code.
>
> John.
>
>
>
>
> On 21 Sep 2019, at 14:48, Roman Lebedev <lebedev.ri at gmail.com>
wrote:
>
> On Sat, Sep 21, 2019 at 3:18 PM Joan Lluch via cfe-dev
> <cfe-dev at lists.llvm.org> wrote:
>
>
> Hi all,
>
> For my custom architecture, I want to relax the CFG simplification pass,
and any other passes replacing conditional branches.
>
> I found that the replacement of conditional branches by “select" and
other instructions is often too aggressive, and this causes inefficient code for
my target as in most cases branches would be cheaper.
>
> For example, considering the following c code:
>
> long test (long a, long b)
> {
> int neg = 0;
> long res;
>
> if (a < 0)
> {
>   a = -a;
>   neg = 1;
> }
>
> res = a*b;
>
> if (neg)
>   res = -res;
>
> return res;
> }
>
>
> This code can be simplified in c, but it’s just an example to show the
point.
>
> The code above gets compiled like this (-Oz flag):
>
> ; Function Attrs: minsize norecurse nounwind optsize readnone
> define dso_local i32 @test(i32 %a, i32 %b) local_unnamed_addr #0 {
> entry:
> %cmp = icmp slt i32 %a, 0
> %sub = sub nsw i32 0, %a
> %a.addr.0 = select i1 %cmp, i32 %sub, i32 %a
> %mul = mul nsw i32 %a.addr.0, %b
> %sub2 = sub nsw i32 0, %mul
> %res.0 = select i1 %cmp, i32 %sub2, i32 %mul
> ret i32 %res.0
> }
>
>
> All branching was removed and replaced by ‘select’ instructions. For my
architecture, it would be desirable to keep the original branches in most cases,
because even simple 32 bit operations are too expensive to speculatively execute
them, and branches are cheap.
>
> Setting  'phi-node-folding-threshold’ to 1 or even 0 (instead of the
default 2), definitely improves the situation in many cases, but Clang still
creates many instances of ‘select’ instructions, which are detrimental to my
target. I am unsure about where are they created, as I believe that the
simplifycfg pass does not longer create them.
>
> You definitively can't ban llvm passes/clang from creating
select's.
>
> So the question is: Are there any other hooks in clang, or custom code that
I can implement, to relax the creation of ’select’ instructions and make it
preserve branches in the original c code?
>
> I think this is backwards.
> Sure, you could maybe disable most of the folds that produce selects.
> That may be good for final codegen, but will also affect other passes
> since not everything deals with 2-node PHI as good as wit selects.
>
> But, what happens if you still get the select-y IR?
> Doesn't matter how, could be hand-written.
>
> I think you might want to instead aggressively convert selects into
> branches in backend.
>
> Thanks,
>
> John
>
> Roman
>
> _______________________________________________
> LLVM Developers mailing list
> llvm-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
> _______________________________________________
> cfe-dev mailing list
> cfe-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev
>
>
> _______________________________________________
> cfe-dev mailing list
> cfe-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev
>
>
>
> _______________________________________________
> cfe-dev mailing list
> cfe-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev
>
>
>
> _______________________________________________
> LLVM Developers mailing list
> llvm-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>
>

Hi Roman
> Not exactly, this is IR after optimizations, this is not what clang
produces.
> To see what clang produces you want to pass -O0.
> All optimizations beyond that are done by LLVM.

Ok, I understand such naming convention, but it is still something that happens
at the IR code generation steps, and therefore the backend has little to do
about.

So, what are actually the hooks that I can implement or investigate to modify
the undesired behaviour?

John

> On 30 Sep 2019, at 13:35, Roman Lebedev <lebedev.ri at gmail.com>
wrote:
> 
> On Mon, Sep 30, 2019 at 11:52 AM Joan Lluch <joan.lluch at
icloud.com> wrote:
>> 
>> Hi Roman,
>> 
>> Is "test" actually an implementation of a 64-bit-wide
multiplication
>> compiler-rt builtin?
>> Then i'd think the main problem is that it is being optimized in
the
>> first place, you could end up with endless recursion…
>> 
>> 
>> No, this is not a compiler-rt builtin. My example is of course
incidentally taken from the implementation of a signed multiply, but as said, it
has nothing to do with rt-builtins, I'm just using that code to show the
issue. This function can’t create a recursion because it’s named ’test’, unlike
any rt-buitin. You can replace the multiply in the source code by an addition,
if you want to avoid calling rt-functions, but this does not change what I
attempt to show. Also It’s not meant to be 64 bit wide, but 32 bit wide, because
the targets I’m testing are 16 bit, so ints are 16 bit and longs are 32 bit.
This is again the function I am testing:
>> 
>> 
>> long test (long a, long b)
>> {
>>  int neg = 0;
>>  long res;
>> 
>>  if (a < 0)
>>  {
>>    a = -a;
>>    neg = 1;
>>  }
>> 
>>  if (b < 0)
>>  {
>>    b = -b;
>>    neg = !neg;
>>  }
>> 
>>  res = a*b;
>> 
>>  if (neg)
>>    res = -res;
>> 
>>  return res;
>> }
>> 
>> 
>> 
>> LLVM, not clang.
>> 
>> 
>> I’m not sure about what you mean by that. The shown LLVM IR code is
created by executing "clang” command line, so that’s what I attempt to
show.
> Not exactly, this is IR after optimizations, this is not what clang
produces.
> To see what clang produces you want to pass -O0.
> All optimizations beyond that are done by LLVM.
> 
>> So it’s actually the front-end that does such undesired optimisations
sometimes, not only the LLVM back-end. This is in part why I am saying this is
not right. See copied again the IR code that gets generated for the C code that
I posted before. This IR code, including the presence of expensive shifts (
%a.lobit = lshr i32 %a, 31)  is generated when -mllvm
-phi-node-folding-threshold=1 is specified in the command line, or when the
Target implements getOperationCost(unsigned Opcode, Type *Ty, Type *OpTy) to
return TCC_Expensive for operator types that are bigger than the default target
register size.
>> 
>> 
>> 
>> ; ModuleID = 'main.c'
>> source_filename = "main.c"
>> target datalayout =
"e-m:e-p:16:16-i32:16-i64:16-f32:16-f64:16-a:8-n8:16-S16"
>> target triple = "msp430"
>> 
>> ; Function Attrs: norecurse nounwind optsize readnone
>> define dso_local i32 @test(i32 %a, i32 %b) local_unnamed_addr #0 {
>> entry:
>>  %cmp = icmp slt i32 %a, 0
>>  %sub = sub nsw i32 0, %a
>>  %spec.select = select i1 %cmp, i32 %sub, i32 %a
>>  %a.lobit = lshr i32 %a, 31
>>  %0 = trunc i32 %a.lobit to i16
>>  %cmp1 = icmp slt i32 %b, 0
>>  br i1 %cmp1, label %if.then2, label %if.end4
>> 
>> if.then2:                                         ; preds = %entry
>>  %sub3 = sub nsw i32 0, %b
>>  %1 = xor i16 %0, 1
>>  br label %if.end4
>> 
>> if.end4:                                          ; preds = %if.then2,
%entry
>>  %b.addr.0 = phi i32 [ %sub3, %if.then2 ], [ %b, %entry ]
>>  %neg.1 = phi i16 [ %1, %if.then2 ], [ %0, %entry ]
>>  %mul = mul nsw i32 %b.addr.0, %spec.select
>>  %tobool5 = icmp eq i16 %neg.1, 0
>>  %sub7 = sub nsw i32 0, %mul
>>  %spec.select18 = select i1 %tobool5, i32 %mul, i32 %sub7
>>  ret i32 %spec.select18
>> }
>> 
>> attributes #0 = { norecurse nounwind optsize readnone
"correctly-rounded-divide-sqrt-fp-math"="false"
"disable-tail-calls"="false"
"less-precise-fpmad"="false"
"min-legal-vector-width"="0"
"no-frame-pointer-elim"="false"
"no-infs-fp-math"="false"
"no-jump-tables"="false"
"no-nans-fp-math"="false"
"no-signed-zeros-fp-math"="false"
"no-trapping-math"="false"
"stack-protector-buffer-size"="8"
"unsafe-fp-math"="false"
"use-soft-float"="false" }
>> 
>> !llvm.module.flags = !{!0}
>> !llvm.ident = !{!1}
>> 
>> !0 = !{i32 1, !"wchar_size", i32 2}
>> !1 = !{!"clang version 9.0.0
(https://github.com/llvm/llvm-project.git
6f7deba43dd25fb7b3eca70f9c388ec9174f455a)"}
>> 
>> 
>> 
>> As you can see, Clang produces a 31 bit wide shift right ( %a.lobit =
lshr i32 %a, 31) That’s the fourth instruction on the IR code above. So a shift
is produced instead of creating a jump to a new block, as it should be the case
as per the C source code.
>> 
>> Just as a matter of information. This is the implementation of the
getOperationCost function that causes ‘clang’ to correctly replace selects by
branches (desirable), but to generate shifts to fold expensive selects
(undesirable)
>> 
>> 
>> unsigned CPU74TTIImpl::getOperationCost(unsigned Opcode, Type *Ty, Type
*OpTy)
>> {
>>  // Big types are expensive
>>  unsigned OpSize = Ty->getScalarSizeInBits();
>>  if ( OpSize > 16 )
>>    return TTI::TCC_Expensive;
>> 
>>  return BaseT::getOperationCost(Opcode, Ty, OpTy);
>> }
>> 
>> If the getOperationCost above function was not implemented, then clang
would generate the usual series of ‘selects’. But this is even worse because
selects imply speculative execution of expensive instructions, or duplicate
branching created by the backend, which can’t be easily avoided.
>> 
>> Ideally, the IR code above should just place an ‘if.then' block for
the if (a < 0) statement in the C source code, instead of attempting to
replace a select by a shift (!)
>> 
>> If you want to play with these two scenarios, (1) IR code generated
with branches, and (2) IR code generated with selects. This can easily be
reproduced for the MSP430 target by compiling with the following options
>> (1)  -mllvm -phi-node-folding-threshold=1 -c -S -Os
>> (2)  -mllvm -phi-node-folding-threshold=2 -c -S -Os
>> 
>> For 16 bit targets without selects, or expensive selects, the overall
code is better with (1) because that prevents the creation of a different jump
for every ‘select’ that (2) would cause. However, the presence of the ‘shift’
instruction for (1) spoils it all.
>> 
>> Again, ideally, the use of shifts as a replacement of selects should be
avoided, and an “if.then" block should be used as per the original C code.
>> 
>> I hope this is clear now.
>> 
>> John.
>> 
>> 
>> On 29 Sep 2019, at 15:57, Roman Lebedev <lebedev.ri at gmail.com>
wrote:
>> 
>> On Sun, Sep 29, 2019 at 3:35 PM Joan Lluch via llvm-dev
>> <llvm-dev at lists.llvm.org> wrote:
>> 
>> 
>> Hi Sanjay,
>> 
>> Actually, the CodeGenPrepare::optimizeSelectInst is not doing the best
it could do in some circumstances: The case of “OptSize" for targets not
supporting Select was already mentioned to be detrimental.
>> 
>> For targets that actually have selects, but branches are cheap and
generally profitable, particularly for expensive operators, the
optimizeSelectInst function does not do good either. The function tries to
identify consecutive selects with the same condition in order to avoid duplicate
branches, which is ok, but then this effort is discarded in
isFormingBranchFromSelectProfitable because the identified condition is used
more than once (on the said two consecutive selects, of course), which defeats
the whole purpose of checking for them, resulting in poor codegen.
>> 
>> Yet another issue is that Clang attempts to replace ‘selects’ in the
source code, by supposedly optimised code that is not ok for all targets. One
example is this:
>> 
>> LLVM, not clang.
>> 
>> long test (long a, long b)
>> {
>> int neg = 0;
>> long res;
>> 
>> if (a < 0)
>> {
>>   a = -a;
>>   neg = 1;
>> }
>> 
>> if (b < 0)
>> {
>>   b = -b;
>>   neg = !neg;
>> }
>> 
>> res = a*b; //(unsigned long)a / (unsigned long)b;  // will call
__udivsi3
>> 
>> if (neg)
>>   res = -res;
>> 
>> return res;
>> }
>> 
>> 
>> This gets compiled into
>> 
>> ; Function Attrs: norecurse nounwind readnone
>> define dso_local i32 @test(i32 %a, i32 %b) local_unnamed_addr #0 {
>> entry:
>> %cmp = icmp slt i32 %a, 0
>> %sub = sub nsw i32 0, %a
>> %a.addr.0 = select i1 %cmp, i32 %sub, i32 %a
>> %a.lobit = lshr i32 %a, 31
>> %0 = trunc i32 %a.lobit to i16
>> %cmp1 = icmp slt i32 %b, 0
>> br i1 %cmp1, label %if.then2, label %if.end4
>> 
>> if.then2:                                         ; preds = %entry
>> %sub3 = sub nsw i32 0, %b
>> %1 = xor i16 %0, 1
>> br label %if.end4
>> 
>> if.end4:                                          ; preds = %if.then2,
%entry
>> %b.addr.0 = phi i32 [ %sub3, %if.then2 ], [ %b, %entry ]
>> %neg.1 = phi i16 [ %1, %if.then2 ], [ %0, %entry ]
>> %mul = mul nsw i32 %b.addr.0, %a.addr.0
>> %tobool5 = icmp eq i16 %neg.1, 0
>> %sub7 = sub nsw i32 0, %mul
>> %res.0 = select i1 %tobool5, i32 %mul, i32 %sub7
>> ret i32 %res.0
>> }
>> 
>> The offending part here is this:  %a.lobit = lshr i32 %a, 31 . Instead
of just creating a “select” instruction, as the original code suggested with the
if (a < 0) { neg = 1;} statements, the front-end produces a lshr which is
very expensive for small architectures, and makes it very difficult for the
backend to fold it again into an actual select (or branch). In my opinion, the
original C code should have produced a “select” and give the backend the
opportunity to optimise it if required. I think that the frontend should perform
only target independent optimisations.
>> 
>> 
>> You didn't specify how you compile that code.
>> We could also get: https://godbolt.org/z/B-5lj1
>> Which can actually be folded further to just
>> long test(long a, long b) {
>>   return a * b;
>> }
>> Is "test" actually an implementation of a 64-bit-wide
multiplication
>> compiler-rt builtin?
>> Then i'd think the main problem is that it is being optimized in
the
>> first place, you could end up with endless recursion...
>> 
>> I posted before my view that LLVM is clearly designed to satisfy big
boys such as the x86 and ARM targets. This means that, unfortunately, it makes
too many general assumptions about what’s cheap, without providing enough hooks
to cancel arbitrary optimisations. As I am implementing backends for 8 or 16 bit
targets, I find myself doing a lot of work just to reverse optimisations that
should have not been applied in the first place. My example above is an instance
of a code mutation performed by the frontend that is not desirable. Existing 8
and 16 bit trunk targets (particularly the MSP430 and the AVR) are also
negatively affected by the excessively liberal use of shifts by LLVM.
>> 
>> The CodeGenPrepare::optimizeSelectInst function needs some changes to
respect targets with no selects, and targets that may want to avoid expensive
speculative executions.
>> 
>> John
>> 
>> Roman
>> 
>> On 25 Sep 2019, at 16:00, Sanjay Patel <spatel at
rotateright.com> wrote:
>> 
>> Changing the order of the checks in
CodeGenPrepare::optimizeSelectInst() sounds good to me.
>> 
>> But you may need to go further for optimum performance. For example, we
may be canonicalizing math/logic IR patterns into 'select' such as in
the recent:
>> https://reviews.llvm.org/D67799
>> 
>> So if you want those to become ALU ops again rather than branches, then
you need to do the transform later in the backend. That is, you want to let
DAGCombiner run its set of transforms on 'select' nodes.
>> 
>> On Wed, Sep 25, 2019 at 4:03 AM Joan Lluch via cfe-dev <cfe-dev at
lists.llvm.org> wrote:
>> 
>> 
>> Hi Craig,
>> 
>> Thank you for your reply. I have started looking at “CodeGenPrepare”
and I assume you reffer to CodeGenPrepare::optimizeSelectInst. I will try to
play a bit with that possibly later today. At first glance, it looks to me that
for targets that do not support ’select’ at all, the fact that the function
exits early for ‘OptSize’ can be detrimental, because this will just leave ALL
existing selects in the code anyway. As said, I will try to play with that
later, but right now it looks to me that maybe we should check  for
TLI->isSelectSupported earlier in the function, to get some more
opportunities to such targets without explicit ’select’ support?
>> 
>> Thanks
>> 
>> John
>> 
>> 
>> On 25 Sep 2019, at 08:59, Craig Topper <craig.topper at
gmail.com> wrote:
>> 
>> There is code in CodeGenPrepare.cpp that can turn selects into branches
that tries to account for multiple selects sharing the same condition. It
doesn't look like either AVR or MSP430 enable that code though.
>> 
>> ~Craig
>> 
>> 
>> On Tue, Sep 24, 2019 at 11:27 PM Joan Lluch via cfe-dev <cfe-dev at
lists.llvm.org> wrote:
>> 
>> 
>> Hi Roman,
>> 
>> Thank you for your reply. I understand your point. I just want to add
something to clarify my original post in relation to your reply.
>> 
>> There are already implemented 8-bit and 16-bit backends, namely the AVR
and the MSP430, which already "aggressively convert selects into branches”,
which already benefit (as they are) from setting
"phi-node-folding-threshold’ to 1 or zero. This is because otherwise Clang
will generate several selects depending on the same “icmp”. These backends are
unable to optimise that, and they just create a comparison and a conditional
branch for every “select” in the IR code, in spite that the original C code was
already written in a much better way. So the resulting effect is the presence of
redundant comparisons and branches in the final code, with a detrimental of
generated code quality.
>> 
>> The above gets improved by setting "phi-node-folding-threshold’ to
1 because some of these extra ‘selects' are no longer there so the backend
stops generating redundant code.
>> 
>> John.
>> 
>> 
>> 
>> 
>> On 21 Sep 2019, at 14:48, Roman Lebedev <lebedev.ri at gmail.com>
wrote:
>> 
>> On Sat, Sep 21, 2019 at 3:18 PM Joan Lluch via cfe-dev
>> <cfe-dev at lists.llvm.org> wrote:
>> 
>> 
>> Hi all,
>> 
>> For my custom architecture, I want to relax the CFG simplification
pass, and any other passes replacing conditional branches.
>> 
>> I found that the replacement of conditional branches by “select"
and other instructions is often too aggressive, and this causes inefficient code
for my target as in most cases branches would be cheaper.
>> 
>> For example, considering the following c code:
>> 
>> long test (long a, long b)
>> {
>> int neg = 0;
>> long res;
>> 
>> if (a < 0)
>> {
>>  a = -a;
>>  neg = 1;
>> }
>> 
>> res = a*b;
>> 
>> if (neg)
>>  res = -res;
>> 
>> return res;
>> }
>> 
>> 
>> This code can be simplified in c, but it’s just an example to show the
point.
>> 
>> The code above gets compiled like this (-Oz flag):
>> 
>> ; Function Attrs: minsize norecurse nounwind optsize readnone
>> define dso_local i32 @test(i32 %a, i32 %b) local_unnamed_addr #0 {
>> entry:
>> %cmp = icmp slt i32 %a, 0
>> %sub = sub nsw i32 0, %a
>> %a.addr.0 = select i1 %cmp, i32 %sub, i32 %a
>> %mul = mul nsw i32 %a.addr.0, %b
>> %sub2 = sub nsw i32 0, %mul
>> %res.0 = select i1 %cmp, i32 %sub2, i32 %mul
>> ret i32 %res.0
>> }
>> 
>> 
>> All branching was removed and replaced by ‘select’ instructions. For my
architecture, it would be desirable to keep the original branches in most cases,
because even simple 32 bit operations are too expensive to speculatively execute
them, and branches are cheap.
>> 
>> Setting  'phi-node-folding-threshold’ to 1 or even 0 (instead of
the default 2), definitely improves the situation in many cases, but Clang still
creates many instances of ‘select’ instructions, which are detrimental to my
target. I am unsure about where are they created, as I believe that the
simplifycfg pass does not longer create them.
>> 
>> You definitively can't ban llvm passes/clang from creating
select's.
>> 
>> So the question is: Are there any other hooks in clang, or custom code
that I can implement, to relax the creation of ’select’ instructions and make it
preserve branches in the original c code?
>> 
>> I think this is backwards.
>> Sure, you could maybe disable most of the folds that produce selects.
>> That may be good for final codegen, but will also affect other passes
>> since not everything deals with 2-node PHI as good as wit selects.
>> 
>> But, what happens if you still get the select-y IR?
>> Doesn't matter how, could be hand-written.
>> 
>> I think you might want to instead aggressively convert selects into
>> branches in backend.
>> 
>> Thanks,
>> 
>> John
>> 
>> Roman
>> 
>> _______________________________________________
>> LLVM Developers mailing list
>> llvm-dev at lists.llvm.org
>> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>> _______________________________________________
>> cfe-dev mailing list
>> cfe-dev at lists.llvm.org
>> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev
>> 
>> 
>> _______________________________________________
>> cfe-dev mailing list
>> cfe-dev at lists.llvm.org
>> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev
>> 
>> 
>> 
>> _______________________________________________
>> cfe-dev mailing list
>> cfe-dev at lists.llvm.org
>> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev
>> 
>> 
>> 
>> _______________________________________________
>> LLVM Developers mailing list
>> llvm-dev at lists.llvm.org
>> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>> 
>>

Hi all,

Ok, I just found a much simpler example of the same issue.

Consider the following code

int cmpge32_0(long a) {
  return a>=0;
}

Compiled for the MSP430 with -O1 or -Os results in the following:

; Function Attrs: norecurse nounwind readnone
define dso_local i16 @cmpge32_0(i32 %a) local_unnamed_addr #0 {
entry:
  %a.lobit = lshr i32 %a, 31
  %0 = trunc i32 %a.lobit to i16
  %.not = xor i16 %0, 1
  ret i16 %.not
}

The backend then turns this into the following totally suboptimal code:

cmpge32_0:
	mov	r13, r12
	inv	r12
	swpb	r12
	mov.b	r12, r12
	clrc
	rrc	r12
	rra	r12
	rra	r12
	rra	r12
	rra	r12
	rra	r12
	rra	r12
	ret
.Lfunc_end0:
	.size	cmpge32_0, .Lfunc_end0-cmpge32_0


The cause of this anomaly is again the presence of the Shift instruction
(%a.lobit = lshr i32 %a, 31) at the IR level, which is hard to handle by the
backend.

The same C code compiled with -O0 creates the following IR code excerpt instead
of the lshr-trunc code sequence

  %cmp = icmp sge i32 %0, 0
  %conv = zext i1 %cmp to i16

This compiles into MUCH better code for the MSP430 architecture (and virtually
any 16 bit architecture not supporting multiple shifts).
It would be desirable that LLVM would just leave the comparison as is, also for 
-O1 and above.


So Please, can somebody point me to the LLVM class or function that performs the
transformation of the comparison above into the undesired shift, so I can
investigate what’s going on, or whether there’s something I can do?

That would be really appreciated.

John


Hi Roman
> Not exactly, this is IR after optimizations, this is not what clang
produces.
> To see what clang produces you want to pass -O0.
> All optimizations beyond that are done by LLVM.

Ok, I understand such naming convention, but it is still something that happens
at the IR code generation steps, and therefore the backend has little to do
about.

So, what are actually the hooks that I can implement or investigate to modify
the undesired behaviour?

John

> On 30 Sep 2019, at 13:35, Roman Lebedev <lebedev.ri at gmail.com>
wrote:
> 
> On Mon, Sep 30, 2019 at 11:52 AM Joan Lluch <joan.lluch at
icloud.com> wrote:
>> 
>> Hi Roman,
>> 
>> Is "test" actually an implementation of a 64-bit-wide
multiplication
>> compiler-rt builtin?
>> Then i'd think the main problem is that it is being optimized in
the
>> first place, you could end up with endless recursion…
>> 
>> 
>> No, this is not a compiler-rt builtin. My example is of course
incidentally taken from the implementation of a signed multiply, but as said, it
has nothing to do with rt-builtins, I'm just using that code to show the
issue. This function can’t create a recursion because it’s named ’test’, unlike
any rt-buitin. You can replace the multiply in the source code by an addition,
if you want to avoid calling rt-functions, but this does not change what I
attempt to show. Also It’s not meant to be 64 bit wide, but 32 bit wide, because
the targets I’m testing are 16 bit, so ints are 16 bit and longs are 32 bit.
This is again the function I am testing:
>> 
>> 
>> long test (long a, long b)
>> {
>> int neg = 0;
>> long res;
>> 
>> if (a < 0)
>> {
>>   a = -a;
>>   neg = 1;
>> }
>> 
>> if (b < 0)
>> {
>>   b = -b;
>>   neg = !neg;
>> }
>> 
>> res = a*b;
>> 
>> if (neg)
>>   res = -res;
>> 
>> return res;
>> }
>> 
>> 
>> 
>> LLVM, not clang.
>> 
>> 
>> I’m not sure about what you mean by that. The shown LLVM IR code is
created by executing "clang” command line, so that’s what I attempt to
show.
> Not exactly, this is IR after optimizations, this is not what clang
produces.
> To see what clang produces you want to pass -O0.
> All optimizations beyond that are done by LLVM.
> 
>> So it’s actually the front-end that does such undesired optimisations
sometimes, not only the LLVM back-end. This is in part why I am saying this is
not right. See copied again the IR code that gets generated for the C code that
I posted before. This IR code, including the presence of expensive shifts (
%a.lobit = lshr i32 %a, 31)  is generated when -mllvm
-phi-node-folding-threshold=1 is specified in the command line, or when the
Target implements getOperationCost(unsigned Opcode, Type *Ty, Type *OpTy) to
return TCC_Expensive for operator types that are bigger than the default target
register size.
>> 
>> 
>> 
>> ; ModuleID = 'main.c'
>> source_filename = "main.c"
>> target datalayout =
"e-m:e-p:16:16-i32:16-i64:16-f32:16-f64:16-a:8-n8:16-S16"
>> target triple = "msp430"
>> 
>> ; Function Attrs: norecurse nounwind optsize readnone
>> define dso_local i32 @test(i32 %a, i32 %b) local_unnamed_addr #0 {
>> entry:
>> %cmp = icmp slt i32 %a, 0
>> %sub = sub nsw i32 0, %a
>> %spec.select = select i1 %cmp, i32 %sub, i32 %a
>> %a.lobit = lshr i32 %a, 31
>> %0 = trunc i32 %a.lobit to i16
>> %cmp1 = icmp slt i32 %b, 0
>> br i1 %cmp1, label %if.then2, label %if.end4
>> 
>> if.then2:                                         ; preds = %entry
>> %sub3 = sub nsw i32 0, %b
>> %1 = xor i16 %0, 1
>> br label %if.end4
>> 
>> if.end4:                                          ; preds = %if.then2,
%entry
>> %b.addr.0 = phi i32 [ %sub3, %if.then2 ], [ %b, %entry ]
>> %neg.1 = phi i16 [ %1, %if.then2 ], [ %0, %entry ]
>> %mul = mul nsw i32 %b.addr.0, %spec.select
>> %tobool5 = icmp eq i16 %neg.1, 0
>> %sub7 = sub nsw i32 0, %mul
>> %spec.select18 = select i1 %tobool5, i32 %mul, i32 %sub7
>> ret i32 %spec.select18
>> }
>> 
>> attributes #0 = { norecurse nounwind optsize readnone
"correctly-rounded-divide-sqrt-fp-math"="false"
"disable-tail-calls"="false"
"less-precise-fpmad"="false"
"min-legal-vector-width"="0"
"no-frame-pointer-elim"="false"
"no-infs-fp-math"="false"
"no-jump-tables"="false"
"no-nans-fp-math"="false"
"no-signed-zeros-fp-math"="false"
"no-trapping-math"="false"
"stack-protector-buffer-size"="8"
"unsafe-fp-math"="false"
"use-soft-float"="false" }
>> 
>> !llvm.module.flags = !{!0}
>> !llvm.ident = !{!1}
>> 
>> !0 = !{i32 1, !"wchar_size", i32 2}
>> !1 = !{!"clang version 9.0.0
(https://github.com/llvm/llvm-project.git
6f7deba43dd25fb7b3eca70f9c388ec9174f455a)"}
>> 
>> 
>> 
>> As you can see, Clang produces a 31 bit wide shift right ( %a.lobit =
lshr i32 %a, 31) That’s the fourth instruction on the IR code above. So a shift
is produced instead of creating a jump to a new block, as it should be the case
as per the C source code.
>> 
>> Just as a matter of information. This is the implementation of the
getOperationCost function that causes ‘clang’ to correctly replace selects by
branches (desirable), but to generate shifts to fold expensive selects
(undesirable)
>> 
>> 
>> unsigned CPU74TTIImpl::getOperationCost(unsigned Opcode, Type *Ty, Type
*OpTy)
>> {
>> // Big types are expensive
>> unsigned OpSize = Ty->getScalarSizeInBits();
>> if ( OpSize > 16 )
>>   return TTI::TCC_Expensive;
>> 
>> return BaseT::getOperationCost(Opcode, Ty, OpTy);
>> }
>> 
>> If the getOperationCost above function was not implemented, then clang
would generate the usual series of ‘selects’. But this is even worse because
selects imply speculative execution of expensive instructions, or duplicate
branching created by the backend, which can’t be easily avoided.
>> 
>> Ideally, the IR code above should just place an ‘if.then' block for
the if (a < 0) statement in the C source code, instead of attempting to
replace a select by a shift (!)
>> 
>> If you want to play with these two scenarios, (1) IR code generated
with branches, and (2) IR code generated with selects. This can easily be
reproduced for the MSP430 target by compiling with the following options
>> (1)  -mllvm -phi-node-folding-threshold=1 -c -S -Os
>> (2)  -mllvm -phi-node-folding-threshold=2 -c -S -Os
>> 
>> For 16 bit targets without selects, or expensive selects, the overall
code is better with (1) because that prevents the creation of a different jump
for every ‘select’ that (2) would cause. However, the presence of the ‘shift’
instruction for (1) spoils it all.
>> 
>> Again, ideally, the use of shifts as a replacement of selects should be
avoided, and an “if.then" block should be used as per the original C code.
>> 
>> I hope this is clear now.
>> 
>> John.
>> 
>> 
>> On 29 Sep 2019, at 15:57, Roman Lebedev <lebedev.ri at gmail.com>
wrote:
>> 
>> On Sun, Sep 29, 2019 at 3:35 PM Joan Lluch via llvm-dev
>> <llvm-dev at lists.llvm.org> wrote:
>> 
>> 
>> Hi Sanjay,
>> 
>> Actually, the CodeGenPrepare::optimizeSelectInst is not doing the best
it could do in some circumstances: The case of “OptSize" for targets not
supporting Select was already mentioned to be detrimental.
>> 
>> For targets that actually have selects, but branches are cheap and
generally profitable, particularly for expensive operators, the
optimizeSelectInst function does not do good either. The function tries to
identify consecutive selects with the same condition in order to avoid duplicate
branches, which is ok, but then this effort is discarded in
isFormingBranchFromSelectProfitable because the identified condition is used
more than once (on the said two consecutive selects, of course), which defeats
the whole purpose of checking for them, resulting in poor codegen.
>> 
>> Yet another issue is that Clang attempts to replace ‘selects’ in the
source code, by supposedly optimised code that is not ok for all targets. One
example is this:
>> 
>> LLVM, not clang.
>> 
>> long test (long a, long b)
>> {
>> int neg = 0;
>> long res;
>> 
>> if (a < 0)
>> {
>>  a = -a;
>>  neg = 1;
>> }
>> 
>> if (b < 0)
>> {
>>  b = -b;
>>  neg = !neg;
>> }
>> 
>> res = a*b; //(unsigned long)a / (unsigned long)b;  // will call
__udivsi3
>> 
>> if (neg)
>>  res = -res;
>> 
>> return res;
>> }
>> 
>> 
>> This gets compiled into
>> 
>> ; Function Attrs: norecurse nounwind readnone
>> define dso_local i32 @test(i32 %a, i32 %b) local_unnamed_addr #0 {
>> entry:
>> %cmp = icmp slt i32 %a, 0
>> %sub = sub nsw i32 0, %a
>> %a.addr.0 = select i1 %cmp, i32 %sub, i32 %a
>> %a.lobit = lshr i32 %a, 31
>> %0 = trunc i32 %a.lobit to i16
>> %cmp1 = icmp slt i32 %b, 0
>> br i1 %cmp1, label %if.then2, label %if.end4
>> 
>> if.then2:                                         ; preds = %entry
>> %sub3 = sub nsw i32 0, %b
>> %1 = xor i16 %0, 1
>> br label %if.end4
>> 
>> if.end4:                                          ; preds = %if.then2,
%entry
>> %b.addr.0 = phi i32 [ %sub3, %if.then2 ], [ %b, %entry ]
>> %neg.1 = phi i16 [ %1, %if.then2 ], [ %0, %entry ]
>> %mul = mul nsw i32 %b.addr.0, %a.addr.0
>> %tobool5 = icmp eq i16 %neg.1, 0
>> %sub7 = sub nsw i32 0, %mul
>> %res.0 = select i1 %tobool5, i32 %mul, i32 %sub7
>> ret i32 %res.0
>> }
>> 
>> The offending part here is this:  %a.lobit = lshr i32 %a, 31 . Instead
of just creating a “select” instruction, as the original code suggested with the
if (a < 0) { neg = 1;} statements, the front-end produces a lshr which is
very expensive for small architectures, and makes it very difficult for the
backend to fold it again into an actual select (or branch). In my opinion, the
original C code should have produced a “select” and give the backend the
opportunity to optimise it if required. I think that the frontend should perform
only target independent optimisations.
>> 
>> 
>> You didn't specify how you compile that code.
>> We could also get: https://godbolt.org/z/B-5lj1
>> Which can actually be folded further to just
>> long test(long a, long b) {
>>  return a * b;
>> }
>> Is "test" actually an implementation of a 64-bit-wide
multiplication
>> compiler-rt builtin?
>> Then i'd think the main problem is that it is being optimized in
the
>> first place, you could end up with endless recursion...
>> 
>> I posted before my view that LLVM is clearly designed to satisfy big
boys such as the x86 and ARM targets. This means that, unfortunately, it makes
too many general assumptions about what’s cheap, without providing enough hooks
to cancel arbitrary optimisations. As I am implementing backends for 8 or 16 bit
targets, I find myself doing a lot of work just to reverse optimisations that
should have not been applied in the first place. My example above is an instance
of a code mutation performed by the frontend that is not desirable. Existing 8
and 16 bit trunk targets (particularly the MSP430 and the AVR) are also
negatively affected by the excessively liberal use of shifts by LLVM.
>> 
>> The CodeGenPrepare::optimizeSelectInst function needs some changes to
respect targets with no selects, and targets that may want to avoid expensive
speculative executions.
>> 
>> John
>> 
>> Roman
>> 
>> On 25 Sep 2019, at 16:00, Sanjay Patel <spatel at
rotateright.com> wrote:
>> 
>> Changing the order of the checks in
CodeGenPrepare::optimizeSelectInst() sounds good to me.
>> 
>> But you may need to go further for optimum performance. For example, we
may be canonicalizing math/logic IR patterns into 'select' such as in
the recent:
>> https://reviews.llvm.org/D67799
>> 
>> So if you want those to become ALU ops again rather than branches, then
you need to do the transform later in the backend. That is, you want to let
DAGCombiner run its set of transforms on 'select' nodes.
>> 
>> On Wed, Sep 25, 2019 at 4:03 AM Joan Lluch via cfe-dev <cfe-dev at
lists.llvm.org> wrote:
>> 
>> 
>> Hi Craig,
>> 
>> Thank you for your reply. I have started looking at “CodeGenPrepare”
and I assume you reffer to CodeGenPrepare::optimizeSelectInst. I will try to
play a bit with that possibly later today. At first glance, it looks to me that
for targets that do not support ’select’ at all, the fact that the function
exits early for ‘OptSize’ can be detrimental, because this will just leave ALL
existing selects in the code anyway. As said, I will try to play with that
later, but right now it looks to me that maybe we should check  for
TLI->isSelectSupported earlier in the function, to get some more
opportunities to such targets without explicit ’select’ support?
>> 
>> Thanks
>> 
>> John
>> 
>> 
>> On 25 Sep 2019, at 08:59, Craig Topper <craig.topper at
gmail.com> wrote:
>> 
>> There is code in CodeGenPrepare.cpp that can turn selects into branches
that tries to account for multiple selects sharing the same condition. It
doesn't look like either AVR or MSP430 enable that code though.
>> 
>> ~Craig
>> 
>> 
>> On Tue, Sep 24, 2019 at 11:27 PM Joan Lluch via cfe-dev <cfe-dev at
lists.llvm.org> wrote:
>> 
>> 
>> Hi Roman,
>> 
>> Thank you for your reply. I understand your point. I just want to add
something to clarify my original post in relation to your reply.
>> 
>> There are already implemented 8-bit and 16-bit backends, namely the AVR
and the MSP430, which already "aggressively convert selects into branches”,
which already benefit (as they are) from setting
"phi-node-folding-threshold’ to 1 or zero. This is because otherwise Clang
will generate several selects depending on the same “icmp”. These backends are
unable to optimise that, and they just create a comparison and a conditional
branch for every “select” in the IR code, in spite that the original C code was
already written in a much better way. So the resulting effect is the presence of
redundant comparisons and branches in the final code, with a detrimental of
generated code quality.
>> 
>> The above gets improved by setting "phi-node-folding-threshold’ to
1 because some of these extra ‘selects' are no longer there so the backend
stops generating redundant code.
>> 
>> John.
>> 
>> 
>> 
>> 
>> On 21 Sep 2019, at 14:48, Roman Lebedev <lebedev.ri at gmail.com>
wrote:
>> 
>> On Sat, Sep 21, 2019 at 3:18 PM Joan Lluch via cfe-dev
>> <cfe-dev at lists.llvm.org> wrote:
>> 
>> 
>> Hi all,
>> 
>> For my custom architecture, I want to relax the CFG simplification
pass, and any other passes replacing conditional branches.
>> 
>> I found that the replacement of conditional branches by “select"
and other instructions is often too aggressive, and this causes inefficient code
for my target as in most cases branches would be cheaper.
>> 
>> For example, considering the following c code:
>> 
>> long test (long a, long b)
>> {
>> int neg = 0;
>> long res;
>> 
>> if (a < 0)
>> {
>> a = -a;
>> neg = 1;
>> }
>> 
>> res = a*b;
>> 
>> if (neg)
>> res = -res;
>> 
>> return res;
>> }
>> 
>> 
>> This code can be simplified in c, but it’s just an example to show the
point.
>> 
>> The code above gets compiled like this (-Oz flag):
>> 
>> ; Function Attrs: minsize norecurse nounwind optsize readnone
>> define dso_local i32 @test(i32 %a, i32 %b) local_unnamed_addr #0 {
>> entry:
>> %cmp = icmp slt i32 %a, 0
>> %sub = sub nsw i32 0, %a
>> %a.addr.0 = select i1 %cmp, i32 %sub, i32 %a
>> %mul = mul nsw i32 %a.addr.0, %b
>> %sub2 = sub nsw i32 0, %mul
>> %res.0 = select i1 %cmp, i32 %sub2, i32 %mul
>> ret i32 %res.0
>> }
>> 
>> 
>> All branching was removed and replaced by ‘select’ instructions. For my
architecture, it would be desirable to keep the original branches in most cases,
because even simple 32 bit operations are too expensive to speculatively execute
them, and branches are cheap.
>> 
>> Setting  'phi-node-folding-threshold’ to 1 or even 0 (instead of
the default 2), definitely improves the situation in many cases, but Clang still
creates many instances of ‘select’ instructions, which are detrimental to my
target. I am unsure about where are they created, as I believe that the
simplifycfg pass does not longer create them.
>> 
>> You definitively can't ban llvm passes/clang from creating
select's.
>> 
>> So the question is: Are there any other hooks in clang, or custom code
that I can implement, to relax the creation of ’select’ instructions and make it
preserve branches in the original c code?
>> 
>> I think this is backwards.
>> Sure, you could maybe disable most of the folds that produce selects.
>> That may be good for final codegen, but will also affect other passes
>> since not everything deals with 2-node PHI as good as wit selects.
>> 
>> But, what happens if you still get the select-y IR?
>> Doesn't matter how, could be hand-written.
>> 
>> I think you might want to instead aggressively convert selects into
>> branches in backend.
>> 
>> Thanks,
>> 
>> John
>> 
>> Roman
>> 
>> _______________________________________________
>> LLVM Developers mailing list
>> llvm-dev at lists.llvm.org
>> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>> _______________________________________________
>> cfe-dev mailing list
>> cfe-dev at lists.llvm.org
>> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev
>> 
>> 
>> _______________________________________________
>> cfe-dev mailing list
>> cfe-dev at lists.llvm.org
>> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev
>> 
>> 
>> 
>> _______________________________________________
>> cfe-dev mailing list
>> cfe-dev at lists.llvm.org
>> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev
>> 
>> 
>> 
>> _______________________________________________
>> LLVM Developers mailing list
>> llvm-dev at lists.llvm.org
>> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>> 
>> 
_______________________________________________
LLVM Developers mailing list
llvm-dev at lists.llvm.org
https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20190930/f0158912/attachment-0001.html>

For the MSP430 example, I'm guess its InstCombiner::transformSExtICmp
or InstCombiner::transformZExtICmp

~Craig


On Mon, Sep 30, 2019 at 2:21 PM Support IMAP <support at
sweetwilliamsl.com>
wrote:
> Hi all,
>
> Ok, I just found a much simpler example of the same issue.
>
> Consider the following code
>
> int cmpge32_0(long a) {
>   return a>=0;
> }
>
> Compiled for the MSP430 with -O1 or -Os results in the following:
>
> ; Function Attrs: norecurse nounwind readnone
> define dso_local i16 @cmpge32_0(i32 %a) local_unnamed_addr #0 {
> entry:
>   %a.lobit = lshr i32 %a, 31
>   %0 = trunc i32 %a.lobit to i16
>   %.not = xor i16 %0, 1
>   ret i16 %.not
> }
>
> The backend then turns this into the following totally suboptimal code:
>
> cmpge32_0:
> mov r13, r12
> inv r12
> swpb r12
> mov.b r12, r12
> clrc
> rrc r12
> rra r12
> rra r12
> rra r12
> rra r12
> rra r12
> rra r12
> ret
> .Lfunc_end0:
> .size cmpge32_0, .Lfunc_end0-cmpge32_0
>
>
> The cause of this anomaly is again the presence of the Shift instruction
(%a.lobit
> = lshr i32 %a, 31) at the IR level, which is hard to handle by the
> backend.
>
> The same C code compiled with -O0 creates the following IR code excerpt
> instead of the lshr-trunc code sequence
>
>   %cmp = icmp sge i32 %0, 0
>   %conv = zext i1 %cmp to i16
>
> This compiles into MUCH better code for the MSP430 architecture (and
> virtually any 16 bit architecture not supporting multiple shifts).
> It would be desirable that LLVM would just leave the comparison as is,
> also for  -O1 and above.
>
>
> So Please, can somebody point me to the LLVM class or function that
> performs the transformation of the comparison above into the undesired
> shift, so I can investigate what’s going on, or whether there’s something I
> can do?
>
> That would be really appreciated.
>
> John
>
>
> Hi Roman
>
> Not exactly, this is IR after optimizations, this is not what clang
> produces.
> To see what clang produces you want to pass -O0.
> All optimizations beyond that are done by LLVM.
>
>
>
> Ok, I understand such naming convention, but it is still something that
> happens at the IR code generation steps, and therefore the backend has
> little to do about.
>
> So, what are actually the hooks that I can implement or investigate to
> modify the undesired behaviour?
>
> John
>
>
> On 30 Sep 2019, at 13:35, Roman Lebedev <lebedev.ri at gmail.com>
wrote:
>
> On Mon, Sep 30, 2019 at 11:52 AM Joan Lluch <joan.lluch at
icloud.com> wrote:
>
>
> Hi Roman,
>
> Is "test" actually an implementation of a 64-bit-wide
multiplication
> compiler-rt builtin?
> Then i'd think the main problem is that it is being optimized in the
> first place, you could end up with endless recursion…
>
>
> No, this is not a compiler-rt builtin. My example is of course
> incidentally taken from the implementation of a signed multiply, but as
> said, it has nothing to do with rt-builtins, I'm just using that code
to
> show the issue. This function can’t create a recursion because it’s named
> ’test’, unlike any rt-buitin. You can replace the multiply in the source
> code by an addition, if you want to avoid calling rt-functions, but this
> does not change what I attempt to show. Also It’s not meant to be 64 bit
> wide, but 32 bit wide, because the targets I’m testing are 16 bit, so ints
> are 16 bit and longs are 32 bit. This is again the function I am testing:
>
>
> long test (long a, long b)
> {
> int neg = 0;
> long res;
>
> if (a < 0)
> {
>   a = -a;
>   neg = 1;
> }
>
> if (b < 0)
> {
>   b = -b;
>   neg = !neg;
> }
>
> res = a*b;
>
> if (neg)
>   res = -res;
>
> return res;
> }
>
>
>
> LLVM, not clang.
>
>
> I’m not sure about what you mean by that. The shown LLVM IR code is
> created by executing "clang” command line, so that’s what I attempt to
show.
>
> Not exactly, this is IR after optimizations, this is not what clang
> produces.
> To see what clang produces you want to pass -O0.
> All optimizations beyond that are done by LLVM.
>
> So it’s actually the front-end that does such undesired optimisations
> sometimes, not only the LLVM back-end. This is in part why I am saying this
> is not right. See copied again the IR code that gets generated for the C
> code that I posted before. This IR code, including the presence of
> expensive shifts ( %a.lobit = lshr i32 %a, 31)  is generated when -mllvm
> -phi-node-folding-threshold=1 is specified in the command line, or when the
> Target implements getOperationCost(unsigned Opcode, Type *Ty, Type *OpTy)
> to return TCC_Expensive for operator types that are bigger than the default
> target register size.
>
>
>
> ; ModuleID = 'main.c'
> source_filename = "main.c"
> target datalayout >
"e-m:e-p:16:16-i32:16-i64:16-f32:16-f64:16-a:8-n8:16-S16"
> target triple = "msp430"
>
> ; Function Attrs: norecurse nounwind optsize readnone
> define dso_local i32 @test(i32 %a, i32 %b) local_unnamed_addr #0 {
> entry:
> %cmp = icmp slt i32 %a, 0
> %sub = sub nsw i32 0, %a
> %spec.select = select i1 %cmp, i32 %sub, i32 %a
> %a.lobit = lshr i32 %a, 31
> %0 = trunc i32 %a.lobit to i16
> %cmp1 = icmp slt i32 %b, 0
> br i1 %cmp1, label %if.then2, label %if.end4
>
> if.then2:                                         ; preds = %entry
> %sub3 = sub nsw i32 0, %b
> %1 = xor i16 %0, 1
> br label %if.end4
>
> if.end4:                                          ; preds = %if.then2,
> %entry
> %b.addr.0 = phi i32 [ %sub3, %if.then2 ], [ %b, %entry ]
> %neg.1 = phi i16 [ %1, %if.then2 ], [ %0, %entry ]
> %mul = mul nsw i32 %b.addr.0, %spec.select
> %tobool5 = icmp eq i16 %neg.1, 0
> %sub7 = sub nsw i32 0, %mul
> %spec.select18 = select i1 %tobool5, i32 %mul, i32 %sub7
> ret i32 %spec.select18
> }
>
> attributes #0 = { norecurse nounwind optsize readnone
> "correctly-rounded-divide-sqrt-fp-math"="false"
> "disable-tail-calls"="false"
"less-precise-fpmad"="false"
> "min-legal-vector-width"="0"
"no-frame-pointer-elim"="false"
> "no-infs-fp-math"="false"
"no-jump-tables"="false"
> "no-nans-fp-math"="false"
"no-signed-zeros-fp-math"="false"
> "no-trapping-math"="false"
"stack-protector-buffer-size"="8"
> "unsafe-fp-math"="false"
"use-soft-float"="false" }
>
> !llvm.module.flags = !{!0}
> !llvm.ident = !{!1}
>
> !0 = !{i32 1, !"wchar_size", i32 2}
> !1 = !{!"clang version 9.0.0 (https://github.com/llvm/llvm-project.git
> 6f7deba43dd25fb7b3eca70f9c388ec9174f455a)"}
>
>
>
> As you can see, Clang produces a 31 bit wide shift right ( %a.lobit = lshr
> i32 %a, 31) That’s the fourth instruction on the IR code above. So a shift
> is produced instead of creating a jump to a new block, as it should be the
> case as per the C source code.
>
> Just as a matter of information. This is the implementation of the
> getOperationCost function that causes ‘clang’ to correctly replace selects
> by branches (desirable), but to generate shifts to fold expensive selects
> (undesirable)
>
>
> unsigned CPU74TTIImpl::getOperationCost(unsigned Opcode, Type *Ty, Type
> *OpTy)
> {
> // Big types are expensive
> unsigned OpSize = Ty->getScalarSizeInBits();
> if ( OpSize > 16 )
>   return TTI::TCC_Expensive;
>
> return BaseT::getOperationCost(Opcode, Ty, OpTy);
> }
>
> If the getOperationCost above function was not implemented, then clang
> would generate the usual series of ‘selects’. But this is even worse
> because selects imply speculative execution of expensive instructions, or
> duplicate branching created by the backend, which can’t be easily avoided.
>
> Ideally, the IR code above should just place an ‘if.then' block for the
if
> (a < 0) statement in the C source code, instead of attempting to replace
a
> select by a shift (!)
>
> If you want to play with these two scenarios, (1) IR code generated with
> branches, and (2) IR code generated with selects. This can easily be
> reproduced for the MSP430 target by compiling with the following options
> (1)  -mllvm -phi-node-folding-threshold=1 -c -S -Os
> (2)  -mllvm -phi-node-folding-threshold=2 -c -S -Os
>
> For 16 bit targets without selects, or expensive selects, the overall code
> is better with (1) because that prevents the creation of a different jump
> for every ‘select’ that (2) would cause. However, the presence of the
> ‘shift’ instruction for (1) spoils it all.
>
> Again, ideally, the use of shifts as a replacement of selects should be
> avoided, and an “if.then" block should be used as per the original C
code.
>
> I hope this is clear now.
>
> John.
>
>
> On 29 Sep 2019, at 15:57, Roman Lebedev <lebedev.ri at gmail.com>
wrote:
>
> On Sun, Sep 29, 2019 at 3:35 PM Joan Lluch via llvm-dev
> <llvm-dev at lists.llvm.org> wrote:
>
>
> Hi Sanjay,
>
> Actually, the CodeGenPrepare::optimizeSelectInst is not doing the best it
> could do in some circumstances: The case of “OptSize" for targets not
> supporting Select was already mentioned to be detrimental.
>
> For targets that actually have selects, but branches are cheap and
> generally profitable, particularly for expensive operators, the
> optimizeSelectInst function does not do good either. The function tries to
> identify consecutive selects with the same condition in order to avoid
> duplicate branches, which is ok, but then this effort is discarded in
> isFormingBranchFromSelectProfitable because the identified condition is
> used more than once (on the said two consecutive selects, of course), which
> defeats the whole purpose of checking for them, resulting in poor codegen.
>
> Yet another issue is that Clang attempts to replace ‘selects’ in the
> source code, by supposedly optimised code that is not ok for all targets.
> One example is this:
>
> LLVM, not clang.
>
> long test (long a, long b)
> {
> int neg = 0;
> long res;
>
> if (a < 0)
> {
>  a = -a;
>  neg = 1;
> }
>
> if (b < 0)
> {
>  b = -b;
>  neg = !neg;
> }
>
> res = a*b; //(unsigned long)a / (unsigned long)b;  // will call __udivsi3
>
> if (neg)
>  res = -res;
>
> return res;
> }
>
>
> This gets compiled into
>
> ; Function Attrs: norecurse nounwind readnone
> define dso_local i32 @test(i32 %a, i32 %b) local_unnamed_addr #0 {
> entry:
> %cmp = icmp slt i32 %a, 0
> %sub = sub nsw i32 0, %a
> %a.addr.0 = select i1 %cmp, i32 %sub, i32 %a
> %a.lobit = lshr i32 %a, 31
> %0 = trunc i32 %a.lobit to i16
> %cmp1 = icmp slt i32 %b, 0
> br i1 %cmp1, label %if.then2, label %if.end4
>
> if.then2:                                         ; preds = %entry
> %sub3 = sub nsw i32 0, %b
> %1 = xor i16 %0, 1
> br label %if.end4
>
> if.end4:                                          ; preds = %if.then2,
> %entry
> %b.addr.0 = phi i32 [ %sub3, %if.then2 ], [ %b, %entry ]
> %neg.1 = phi i16 [ %1, %if.then2 ], [ %0, %entry ]
> %mul = mul nsw i32 %b.addr.0, %a.addr.0
> %tobool5 = icmp eq i16 %neg.1, 0
> %sub7 = sub nsw i32 0, %mul
> %res.0 = select i1 %tobool5, i32 %mul, i32 %sub7
> ret i32 %res.0
> }
>
> The offending part here is this:  %a.lobit = lshr i32 %a, 31 . Instead of
> just creating a “select” instruction, as the original code suggested with
> the if (a < 0) { neg = 1;} statements, the front-end produces a lshr
which
> is very expensive for small architectures, and makes it very difficult for
> the backend to fold it again into an actual select (or branch). In my
> opinion, the original C code should have produced a “select” and give the
> backend the opportunity to optimise it if required. I think that the
> frontend should perform only target independent optimisations.
>
>
> You didn't specify how you compile that code.
> We could also get: https://godbolt.org/z/B-5lj1
> Which can actually be folded further to just
> long test(long a, long b) {
>  return a * b;
> }
> Is "test" actually an implementation of a 64-bit-wide
multiplication
> compiler-rt builtin?
> Then i'd think the main problem is that it is being optimized in the
> first place, you could end up with endless recursion...
>
> I posted before my view that LLVM is clearly designed to satisfy big boys
> such as the x86 and ARM targets. This means that, unfortunately, it makes
> too many general assumptions about what’s cheap, without providing enough
> hooks to cancel arbitrary optimisations. As I am implementing backends for
> 8 or 16 bit targets, I find myself doing a lot of work just to reverse
> optimisations that should have not been applied in the first place. My
> example above is an instance of a code mutation performed by the frontend
> that is not desirable. Existing 8 and 16 bit trunk targets (particularly
> the MSP430 and the AVR) are also negatively affected by the excessively
> liberal use of shifts by LLVM.
>
> The CodeGenPrepare::optimizeSelectInst function needs some changes to
> respect targets with no selects, and targets that may want to avoid
> expensive speculative executions.
>
> John
>
> Roman
>
> On 25 Sep 2019, at 16:00, Sanjay Patel <spatel at rotateright.com>
wrote:
>
> Changing the order of the checks in CodeGenPrepare::optimizeSelectInst()
> sounds good to me.
>
> But you may need to go further for optimum performance. For example, we
> may be canonicalizing math/logic IR patterns into 'select' such as
in the
> recent:
> https://reviews.llvm.org/D67799
>
> So if you want those to become ALU ops again rather than branches, then
> you need to do the transform later in the backend. That is, you want to let
> DAGCombiner run its set of transforms on 'select' nodes.
>
> On Wed, Sep 25, 2019 at 4:03 AM Joan Lluch via cfe-dev <
> cfe-dev at lists.llvm.org> wrote:
>
>
> Hi Craig,
>
> Thank you for your reply. I have started looking at “CodeGenPrepare” and I
> assume you reffer to CodeGenPrepare::optimizeSelectInst. I will try to play
> a bit with that possibly later today. At first glance, it looks to me that
> for targets that do not support ’select’ at all, the fact that the function
> exits early for ‘OptSize’ can be detrimental, because this will just leave
> ALL existing selects in the code anyway. As said, I will try to play with
> that later, but right now it looks to me that maybe we should check  for
> TLI->isSelectSupported earlier in the function, to get some more
> opportunities to such targets without explicit ’select’ support?
>
> Thanks
>
> John
>
>
> On 25 Sep 2019, at 08:59, Craig Topper <craig.topper at gmail.com>
wrote:
>
> There is code in CodeGenPrepare.cpp that can turn selects into branches
> that tries to account for multiple selects sharing the same condition. It
> doesn't look like either AVR or MSP430 enable that code though.
>
> ~Craig
>
>
> On Tue, Sep 24, 2019 at 11:27 PM Joan Lluch via cfe-dev <
> cfe-dev at lists.llvm.org> wrote:
>
>
> Hi Roman,
>
> Thank you for your reply. I understand your point. I just want to add
> something to clarify my original post in relation to your reply.
>
> There are already implemented 8-bit and 16-bit backends, namely the AVR
> and the MSP430, which already "aggressively convert selects into
branches”,
> which already benefit (as they are) from setting
> "phi-node-folding-threshold’ to 1 or zero. This is because otherwise
Clang
> will generate several selects depending on the same “icmp”. These backends
> are unable to optimise that, and they just create a comparison and a
> conditional branch for every “select” in the IR code, in spite that the
> original C code was already written in a much better way. So the resulting
> effect is the presence of redundant comparisons and branches in the final
> code, with a detrimental of generated code quality.
>
> The above gets improved by setting "phi-node-folding-threshold’ to 1
> because some of these extra ‘selects' are no longer there so the
backend
> stops generating redundant code.
>
> John.
>
>
>
>
> On 21 Sep 2019, at 14:48, Roman Lebedev <lebedev.ri at gmail.com>
wrote:
>
> On Sat, Sep 21, 2019 at 3:18 PM Joan Lluch via cfe-dev
> <cfe-dev at lists.llvm.org> wrote:
>
>
> Hi all,
>
> For my custom architecture, I want to relax the CFG simplification pass,
> and any other passes replacing conditional branches.
>
> I found that the replacement of conditional branches by “select" and
other
> instructions is often too aggressive, and this causes inefficient code for
> my target as in most cases branches would be cheaper.
>
> For example, considering the following c code:
>
> long test (long a, long b)
> {
> int neg = 0;
> long res;
>
> if (a < 0)
> {
> a = -a;
> neg = 1;
> }
>
> res = a*b;
>
> if (neg)
> res = -res;
>
> return res;
> }
>
>
> This code can be simplified in c, but it’s just an example to show the
> point.
>
> The code above gets compiled like this (-Oz flag):
>
> ; Function Attrs: minsize norecurse nounwind optsize readnone
> define dso_local i32 @test(i32 %a, i32 %b) local_unnamed_addr #0 {
> entry:
> %cmp = icmp slt i32 %a, 0
> %sub = sub nsw i32 0, %a
> %a.addr.0 = select i1 %cmp, i32 %sub, i32 %a
> %mul = mul nsw i32 %a.addr.0, %b
> %sub2 = sub nsw i32 0, %mul
> %res.0 = select i1 %cmp, i32 %sub2, i32 %mul
> ret i32 %res.0
> }
>
>
> All branching was removed and replaced by ‘select’ instructions. For my
> architecture, it would be desirable to keep the original branches in most
> cases, because even simple 32 bit operations are too expensive to
> speculatively execute them, and branches are cheap.
>
> Setting  'phi-node-folding-threshold’ to 1 or even 0 (instead of the
> default 2), definitely improves the situation in many cases, but Clang
> still creates many instances of ‘select’ instructions, which are
> detrimental to my target. I am unsure about where are they created, as I
> believe that the simplifycfg pass does not longer create them.
>
> You definitively can't ban llvm passes/clang from creating
select's.
>
> So the question is: Are there any other hooks in clang, or custom code
> that I can implement, to relax the creation of ’select’ instructions and
> make it preserve branches in the original c code?
>
> I think this is backwards.
> Sure, you could maybe disable most of the folds that produce selects.
> That may be good for final codegen, but will also affect other passes
> since not everything deals with 2-node PHI as good as wit selects.
>
> But, what happens if you still get the select-y IR?
> Doesn't matter how, could be hand-written.
>
> I think you might want to instead aggressively convert selects into
> branches in backend.
>
> Thanks,
>
> John
>
> Roman
>
> _______________________________________________
> LLVM Developers mailing list
> llvm-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
> _______________________________________________
> cfe-dev mailing list
> cfe-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev
>
>
> _______________________________________________
> cfe-dev mailing list
> cfe-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev
>
>
>
> _______________________________________________
> cfe-dev mailing list
> cfe-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-dev
>
>
>
> _______________________________________________
> LLVM Developers mailing list
> llvm-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>
>
>
> _______________________________________________
> LLVM Developers mailing list
> llvm-dev at lists.llvm.org
> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20190930/0047360e/attachment.html>