llvm dev - Jun 2019 - [EXT] Re: [RFC][SVE] Supporting SIMD instruction sets with variable vector lengths

Hi All,

I have read the links from Joel. It seems one of its main focus is vectorization
of loop with vector predicate register. I am not sure we need the scalable
vector type for it. Let's see a simple example from the white paper.

1  void example01(int *restrict a, const int *b, const int *c, long N)
2  {
3      long i;
4      for (i = 0; i < N; ++i)
5          a[i] = b[i] + c[i];
6  }

We could imagine roughly the vectorized loop with mask on IR level as below.

header:
  %n.broadcast.splatinsert = insertelement <8 x i32> undef, i32 %n, i32 0
  %n.vec = shufflevector <8 x i32> %broadcast.splatinsert, <8 x i32>
undef, <8 x i32> zeroinitializer
  br label %loop.body

loop.body:
  %index = phi i32 [ 0, %header ], [ %index.next, %loop.body ]
  %mask.vec = phi <8 x i1> [ <i1 true, i1 true, i1 true, i1 true, i1
true, i1 true, i1 true, i1 true>, %header ], [ %mask.vec.next, %loop.body ]
  %a.addr = getelementptr inbounds i32, i32* %a, i32 %index
  %b.addr = getelementptr inbounds i32, i32* %b, i32 %index
  %c.addr = getelementptr inbounds i32, i32* %c, i32 %index
  %b.val = call <8 x i32> @llvm.masked.load.v8i32.p0v8i32(<8 x i32>*
%b.addr, i32 4, <8 x i1> %mask.vec, <8 x i32> undef)
  %c.val = call <8 x i32> @llvm.masked.load.v8i32.p0v8i32(<8 x i32>*
%c.addr, i32 4, <8 x i1> %mask.vec, <8 x i32> undef)
  %a.val = add <8 x i32> %b.val, %c.val
  call void @llvm.masked.store.v8i32.p0v8i32(<8 x i32> %a.val, <8 x
i32>* %a.addr, i32 4, <8 x i1> %mask.vec)
  %index.broadcast.splatinsert = insertelement <8 x i32> undef, i32
%index, i32 0
  %index.vec = shufflevector <8 x i32> %index.broadcast.splatinsert, <8
x i32> undef, <8 x i32> zeroinitializer
  %index.next.vec = add <8 x i32> index.vec, <i32 0, i32 1, i32 2, i32
3, i32 4, i32 5, i32 6, i32 7>
  %lane.cond.vec = icmp lt <8 x i32> %index.next.vec, %n.vec
  %mask.vec.next = and <8 x ii> %lane.cond.vec, %mask.vec
  %index.next = add i32 index, 8
  %cond = icmp eq i64 %index.next, %n
  br i1 %cond, label %loop.exit, label %loop.body

loop.exit:

Above vectorized loop does not need tail loop. I guess we could map the
%mask.vec to predicate register as native register class on ISelLowering level.
The conditional branch could also be mapped to 'whilexx' and 'b.xxx
on MIR level. In order to get vector type, we could calculate cost model for
target as llvm's vectorizers. If SVE focuses on loop vectorization mainly, I
am not sure why the scalarable vector type is needed... From my personal
opinion, the VLA programming model could add ambiquity and complexity to
compiler because it is not concrete type at compile time... I am not expert for
SVE and VLA. I could miss something important. If I missed something, please let
me know.

Thanks,
JinGu Kang

________________________________
From: llvm-dev <llvm-dev-bounces at lists.llvm.org> on behalf of JinGu
Kang via llvm-dev <llvm-dev at lists.llvm.org>
Sent: 24 May 2019 21:47
To: Joel Jones; Chris Lattner; Hal Finkel; Jones, Joel; dag at cray.com; Renato
Golin; Kristof Beyls; Amara Emerson; Florian Hahn; Sander De Smalen; Robin
Kruppe; llvm-dev at lists.llvm.org; mkuper at google.com; Sjoerd Meijer; Sam
Parker; Graham Hunter
Cc: nd
Subject: Re: [llvm-dev] [EXT] Re: [RFC][SVE] Supporting SIMD instruction sets
with variable vector lengths

Hi Joel,

Thanks for your kind guide.
>
https://community.arm.com/developer/tools-software/hpc/b/hpc-blog/posts/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture<https://community.arm.com/developer/tools-software/hpc/b/hpc-blog/posts/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture>
I will have a look the post.
> One key restriction is that certain storage classes can’t contain scalable
vector types, like statically allocated globals for example.
It was one of what I want to know.

Thanks,
JinGu Kang
________________________________
From: Joel Jones <joelj at marvell.com>
Sent: 24 May 2019 19:40
To: JinGu Kang; Chris Lattner; Hal Finkel; Jones, Joel; dag at cray.com; Renato
Golin; Kristof Beyls; Amara Emerson; Florian Hahn; Sander De Smalen; Robin
Kruppe; llvm-dev at lists.llvm.org; mkuper at google.com; Sjoerd Meijer; Sam
Parker; Graham Hunter
Cc: nd
Subject: Re: [EXT] Re: [RFC][SVE] Supporting SIMD instruction sets with variable
vector lengths


JinGu:



I’m not Graham, but you might find the following link a good starting point.



https://community.arm.com/developer/tools-software/hpc/b/hpc-blog/posts/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture



The question you ask doesn’t have a short answer. The compiler and the
instruction set design work together to allow programs to be compiled without
knowing until run-time what the vector width is (within limits of min and max
possible widths). One key restriction is that certain storage classes can’t
contain scalable vector types, like statically allocated globals for example.



Joel Jones



From: JinGu Kang <jingu at codeplay.com>
Date: Friday, May 24, 2019 at 11:28 AM
To: Chris Lattner <clattner at nondot.org>, Hal Finkel <hfinkel at
anl.gov>, "Jones, Joel" <Joel.Jones at cavium.com>, "dag
at cray.com" <dag at cray.com>, Renato Golin <renato.golin at
linaro.org>, Kristof Beyls <Kristof.Beyls at arm.com>, Amara Emerson
<aemerson at apple.com>, Florian Hahn <Florian.Hahn at arm.com>,
Sander De Smalen <Sander.DeSmalen at arm.com>, Robin Kruppe
<robin.kruppe at gmail.com>, "llvm-dev at lists.llvm.org"
<llvm-dev at lists.llvm.org>, "mkuper at google.com" <mkuper
at google.com>, Sjoerd Meijer <Sjoerd.Meijer at arm.com>, Sam Parker
<Sam.Parker at arm.com>, Graham Hunter <Graham.Hunter at arm.com>
Cc: nd <nd at arm.com>
Subject: [EXT] Re: [RFC][SVE] Supporting SIMD instruction sets with variable
vector lengths



External Email

________________________________

Hi Graham,



I am working on a custom target and it is considering scalable vector type
representation in programming language. While I am collecting the information
about it, I have met your RFC. I have a question. I think the one of fundamental
issues is that we do not know the memory layout of the type at compile time. I
am not sure whether the RFC covers this issue or not. Conservatively, I imagined
the memory layout of biggest type which the scalable vector type can support. I
could miss some discussions about it. If I missed something, please let me know.



Thanks,

JinGu Kang



________________________________

From: llvm-dev <llvm-dev-bounces at lists.llvm.org> on behalf of Graham
Hunter via llvm-dev <llvm-dev at lists.llvm.org>
Sent: 05 June 2018 14:15
To: Chris Lattner; Hal Finkel; Jones, Joel; dag at cray.com; Renato Golin;
Kristof Beyls; Amara Emerson; Florian Hahn; Sander De Smalen; Robin Kruppe;
llvm-dev at lists.llvm.org; mkuper at google.com; Sjoerd Meijer; Sam Parker
Cc: nd
Subject: [llvm-dev] [RFC][SVE] Supporting SIMD instruction sets with variable
vector lengths



Hi,

Now that Sander has committed enough MC support for SVE, here's an updated
RFC for variable length vector support with a set of 14 patches (listed at the
end)
to demonstrate code generation for SVE using the extensions proposed in the RFC.

I have some ideas about how to support RISC-V's upcoming extension alongside
SVE; I'll send an email with some additional comments on Robin's RFC
later.

Feedback and questions welcome.

-Graham

============================================================Supporting SIMD
instruction sets with variable vector lengths
============================================================
In this RFC we propose extending LLVM IR to support code-generation for variable
length vector architectures like Arm's SVE or RISC-V's 'V'
extension. Our
approach is backwards compatible and should be as non-intrusive as possible; the
only change needed in other backends is how size is queried on vector types, and
it only requires a change in which function is called. We have created a set of
proof-of-concept patches to represent a simple vectorized loop in IR and
generate SVE instructions from that IR. These patches (listed in section 7 of
this rfc) can be found on Phabricator and are intended to illustrate the scope
of changes required by the general approach described in this RFC.

=========Background
=========
*ARMv8-A Scalable Vector Extensions* (SVE) is a new vector ISA extension for
AArch64 which is intended to scale with hardware such that the same binary
running on a processor with longer vector registers can take advantage of the
increased compute power without recompilation.

As the vector length is no longer a compile-time known value, the way in which
the LLVM vectorizer generates code requires modifications such that certain
values are now runtime evaluated expressions instead of compile-time constants.

Documentation for SVE can be found at
https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a

=======Contents
=======
The rest of this RFC covers the following topics:

1. Types -- a proposal to extend VectorType to be able to represent vectors that
   have a length which is a runtime-determined multiple of a known base length.

2. Size Queries - how to reason about the size of types for which the size
isn't
   fully known at compile time.

3. Representing the runtime multiple of vector length in IR for use in address
   calculations and induction variable comparisons.

4. Generating 'constant' values in IR for vectors with a
runtime-determined
   number of elements.

5. A brief note on code generation of these new operations for AArch64.

6. An example of C code and matching IR using the proposed extensions.

7. A list of patches demonstrating the changes required to emit SVE instructions
   for a loop that has already been vectorized using the extensions described
   in this RFC.

=======1. Types
=======
To represent a vector of unknown length a boolean `Scalable` property has been
added to the `VectorType` class, which indicates that the number of elements in
the vector is a runtime-determined integer multiple of the `NumElements` field.
Most code that deals with vectors doesn't need to know the exact length, but
does need to know relative lengths -- e.g. get a vector with the same number of
elements but a different element type, or with half or double the number of
elements.

In order to allow code to transparently support scalable vectors, we introduce
an `ElementCount` class with two members:

- `unsigned Min`: the minimum number of elements.
- `bool Scalable`: is the element count an unknown multiple of `Min`?

For non-scalable vectors (``Scalable=false``) the scale is considered to be
equal to one and thus `Min` represents the exact number of elements in the
vector.

The intent for code working with vectors is to use convenience methods and avoid
directly dealing with the number of elements. If needed, calling
`getElementCount` on a vector type instead of `getVectorNumElements` can be used
to obtain the (potentially scalable) number of elements. Overloaded division and
multiplication operators allow an ElementCount instance to be used in much the
same manner as an integer for most cases.

This mixture of compile-time and runtime quantities allow us to reason about the
relationship between different scalable vector types without knowing their
exact length.

The runtime multiple is not expected to change during program execution for SVE,
but it is possible. The model of scalable vectors presented in this RFC assumes
that the multiple will be constant within a function but not necessarily across
functions. As suggested in the recent RISC-V rfc, a new function attribute to
inherit the multiple across function calls will allow for function calls with
vector arguments/return values and inlining/outlining optimizations.

IR Textual Form
---------------

The textual form for a scalable vector is:

``<scalable <n> x <type>>``

where `type` is the scalar type of each element, `n` is the minimum number of
elements, and the string literal `scalable` indicates that the total number of
elements is an unknown multiple of `n`; `scalable` is just an arbitrary choice
for indicating that the vector is scalable, and could be substituted by another.
For fixed-length vectors, the `scalable` is omitted, so there is no change in
the format for existing vectors.

Scalable vectors with the same `Min` value have the same number of elements, and
the same number of bytes if `Min * sizeof(type)` is the same (assuming they are
used within the same function):

``<scalable 4 x i32>`` and ``<scalable 4 x i8>`` have the same
number of
  elements.

``<scalable x 4 x i32>`` and ``<scalable x 8 x i16>`` have the same
number of
  bytes.

IR Bitcode Form
---------------

To serialize scalable vectors to bitcode, a new boolean field is added to the
type record. If the field is not present the type will default to a fixed-length
vector type, preserving backwards compatibility.

Alternatives Considered
-----------------------

We did consider one main alternative -- a dedicated target type, like the
x86_mmx type.

A dedicated target type would either need to extend all existing passes that
work with vectors to recognize the new type, or to duplicate all that code
in order to get reasonable code generation and autovectorization.

This hasn't been done for the x86_mmx type, and so it is only capable of
providing support for C-level intrinsics instead of being used and recognized by
passes inside llvm.

Although our current solution will need to change some of the code that creates
new VectorTypes, much of that code doesn't need to care about whether the
types
are scalable or not -- they can use preexisting methods like
`getHalfElementsVectorType`. If the code is a little more complex,
`ElementCount` structs can be used instead of an `unsigned` value to represent
the number of elements.

==============2. Size Queries
==============
This is a proposal for how to deal with querying the size of scalable types.
While it has not been implemented in full, the general approach works well
for calculating offsets into structures with scalable types in a modified
version of ComputeValueVTs in our downstream compiler.

Current IR types that have a known size all return a single integer constant.
For scalable types a second integer is needed to indicate the number of bytes
which need to be scaled by the runtime multiple to obtain the actual length.

For primitive types, getPrimitiveSizeInBits will function as it does today,
except that it will no longer return a size for vector types (it will return 0,
as it does for other derived types). The majority of calls to this function are
already for scalar rather than vector types.

For derived types, a function (getSizeExpressionInBits) to return a pair of
integers (one to indicate unscaled bits, the other for bits that need to be
scaled by the runtime multiple) will be added. For backends that do not need to
deal with scalable types, another function (getFixedSizeExpressionInBits) that
only returns unscaled bits will be provided, with a debug assert that the type
isn't scalable.

Similar functionality will be added to DataLayout.

Comparing two of these sizes together is straightforward if only unscaled sizes
are used. Comparisons between scaled sizes is also simple when comparing sizes
within a function (or across functions with the inherit flag mentioned in the
changes to the type), but cannot be compared otherwise. If a mix is present,
then any number of unscaled bits will not be considered to have a greater size
than a smaller number of scaled bits, but a smaller number of unscaled bits
will be considered to have a smaller size than a greater number of scaled bits
(since the runtime multiple is at least one).

Future Work
-----------

Since we cannot determine the exact size of a scalable vector, the
existing logic for alias detection won't work when multiple accesses
share a common base pointer with different offsets.

However, SVE's predication will mean that a dynamic 'safe' vector
length
can be determined at runtime, so after initial support has been added we
can work on vectorizing loops using runtime predication to avoid aliasing
problems.

Alternatives Considered
-----------------------

Marking scalable vectors as unsized doesn't work well, as many parts of
llvm dealing with loads and stores assert that 'isSized()' returns true
and make use of the size when calculating offsets.

We have considered introducing multiple helper functions instead of
using direct size queries, but that doesn't cover all cases. It may
still be a good idea to introduce them to make the purpose in a given
case more obvious, e.g. 'isBitCastableTo(Type*,Type*)'.

=======================================3. Representing Vector Length at Runtime
=======================================
With a scalable vector type defined, we now need a way to represent the runtime
length in IR in order to generate addresses for consecutive vectors in memory
and determine how many elements have been processed in an iteration of a loop.

We have added an experimental `vscale` intrinsic to represent the runtime
multiple. Multiplying the result of this intrinsic by the minimum number of
elements in a vector gives the total number of elements in a scalable vector.

Fixed-Length Code
-----------------

Assuming a vector type of <4 x <ty>>
``
vector.body:
  %index = phi i64 [ %index.next, %vector.body ], [ 0, %vector.body.preheader ]
  ;; <loop body>
  ;; Increment induction var
  %index.next = add i64 %index, 4
  ;; <check and branch>
``
Scalable Equivalent
-------------------

Assuming a vector type of <scalable 4 x <ty>>
``
vector.body:
  %index = phi i64 [ %index.next, %vector.body ], [ 0, %vector.body.preheader ]
  ;; <loop body>
  ;; Increment induction var
  %vscale64 = call i64 @llvm.experimental.vector.vscale.64()
  %index.next = add i64 %index, mul (i64 %vscale64, i64 4)
  ;; <check and branch>
``
==========================4. Generating Vector Values
==========================For constant vector values, we cannot specify all the
elements as we can for
fixed-length vectors; fortunately only a small number of easily synthesized
patterns are required for autovectorization. The `zeroinitializer` constant
can be used in the same manner as fixed-length vectors for a constant zero
splat. This can then be combined with `insertelement` and `shufflevector`
to create arbitrary value splats in the same manner as fixed-length vectors.

For constants consisting of a sequence of values, an experimental `stepvector`
intrinsic has been added to represent a simple constant of the form
`<0, 1, 2... num_elems-1>`. To change the starting value a splat of the
new
start can be added, and changing the step requires multiplying by a splat.

Fixed-Length Code
-----------------
``
  ;; Splat a value
  %insert = insertelement <4 x i32> undef, i32 %value, i32 0
  %splat = shufflevector <4 x i32> %insert, <4 x i32> undef, <4 x
i32> zeroinitializer
  ;; Add a constant sequence
  %add = add <4 x i32> %splat, <i32 2, i32 4, i32 6, i32 8>
``
Scalable Equivalent
-------------------
``
  ;; Splat a value
  %insert = insertelement <scalable 4 x i32> undef, i32 %value, i32 0
  %splat = shufflevector <scalable 4 x i32> %insert, <scalable 4 x
i32> undef, <scalable 4 x i32> zeroinitializer
  ;; Splat offset + stride (the same in this case)
  %insert2 = insertelement <scalable 4 x i32> under, i32 2, i32 0
  %str_off = shufflevector <scalable 4 x i32> %insert2, <scalable 4 x
i32> undef, <scalable 4 x i32> zeroinitializer
  ;; Create sequence for scalable vector
  %stepvector = call <scalable 4 x i32>
@llvm.experimental.vector.stepvector.nxv4i32()
  %mulbystride = mul <scalable 4 x i32> %stepvector, %str_off
  %addoffset = add <scalable 4 x i32> %mulbystride, %str_off
  ;; Add the runtime-generated sequence
  %add = add <scalable 4 x i32> %splat, %addoffset
``
Future Work
-----------

Intrinsics cannot currently be used for constant folding. Our downstream
compiler (using Constants instead of intrinsics) relies quite heavily on this
for good code generation, so we will need to find new ways to recognize and
fold these values.

=================5. Code Generation
=================
IR splats will be converted to an experimental splatvector intrinsic in
SelectionDAGBuilder.

All three intrinsics are custom lowered and legalized in the AArch64 backend.

Two new AArch64ISD nodes have been added to represent the same concepts
at the SelectionDAG level, while splatvector maps onto the existing
AArch64ISD::DUP.

GlobalISel
----------

Since GlobalISel was enabled by default on AArch64, it was necessary to add
scalable vector support to the LowLevelType implementation. A single bit was
added to the raw_data representation for vectors and vectors of pointers.

In addition, types that only exist in destination patterns are planted in
the enumeration of available types for generated code. While this may not be
necessary in future, generating an all-true 'ptrue' value was necessary
to
convert a predicated instruction into an unpredicated one.

=========6. Example
=========
The following example shows a simple C loop which assigns the array index to
the array elements matching that index. The IR shows how vscale and stepvector
are used to create the needed values and to advance the index variable in the
loop.

C Code
------

``
void IdentityArrayInit(int *a, int count) {
  for (int i = 0; i < count; ++i)
    a[i] = i;
}
``

Scalable IR Vector Body
-----------------------

``
vector.body.preheader:
  ;; Other setup
  ;; Stepvector used to create initial identity vector
  %stepvector = call <scalable 4 x i32>
@llvm.experimental.vector.stepvector.nxv4i32()
  br vector.body

vector.body
  %index = phi i64 [ %index.next, %vector.body ], [ 0, %vector.body.preheader ]
  %0 = phi i64 [ %1, %vector.body ], [ 0, %vector.body.preheader ]

           ;; stepvector used for index identity on entry to loop body ;;
  %vec.ind7 = phi <scalable 4 x i32> [ %step.add8, %vector.body ],
                                     [ %stepvector, %vector.body.preheader ]
  %vscale64 = call i64 @llvm.experimental.vector.vscale.64()
  %vscale32 = trunc i64 %vscale64 to i32
  %1 = add i64 %0, mul (i64 %vscale64, i64 4)

           ;; vscale splat used to increment identity vector ;;
  %insert = insertelement <scalable 4 x i32> undef, i32 mul (i32
%vscale32, i32 4), i32 0
  %splat shufflevector <scalable 4 x i32> %insert, <scalable 4 x
i32> undef, <scalable 4 x i32> zeroinitializer
  %step.add8 = add <scalable 4 x i32> %vec.ind7, %splat
  %2 = getelementptr inbounds i32, i32* %a, i64 %0
  %3 = bitcast i32* %2 to <scalable 4 x i32>*
  store <scalable 4 x i32> %vec.ind7, <scalable 4 x i32>* %3, align
4

           ;; vscale used to increment loop index
  %index.next = add i64 %index, mul (i64 %vscale64, i64 4)
  %4 = icmp eq i64 %index.next, %n.vec
  br i1 %4, label %middle.block, label %vector.body, !llvm.loop !5
``

=========7. Patches
=========
List of patches:

1. Extend VectorType: https://reviews.llvm.org/D32530
2. Vector element type Tablegen constraint: https://reviews.llvm.org/D47768
3. LLT support for scalable vectors: https://reviews.llvm.org/D47769
4. EVT strings and Type mapping: https://reviews.llvm.org/D47770
5. SVE Calling Convention: https://reviews.llvm.org/D47771
6. Intrinsic lowering cleanup: https://reviews.llvm.org/D47772
7. Add VScale intrinsic: https://reviews.llvm.org/D47773
8. Add StepVector intrinsic: https://reviews.llvm.org/D47774
9. Add SplatVector intrinsic: https://reviews.llvm.org/D47775
10. Initial store patterns: https://reviews.llvm.org/D47776
11. Initial addition patterns: https://reviews.llvm.org/D47777
12. Initial left-shift patterns: https://reviews.llvm.org/D47778
13. Implement copy logic for Z regs: https://reviews.llvm.org/D47779
14. Prevectorized loop unit test: https://reviews.llvm.org/D47780

_______________________________________________
LLVM Developers mailing list
llvm-dev at lists.llvm.org
http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20190527/2266220e/attachment.html>

Hi JinGu,
> Above vectorized loop does not need tail loop. I guess we could map the
%mask.vec to predicate register as native register class on ISelLowering level.
The conditional branch could also be mapped to 'whilexx' and 'b.xxx
on MIR level. In order to get vector type, we could calculate cost model for
target as llvm's vectorizers. If SVE focuses on loop vectorization mainly, I
am not sure why the scalarable vector type is needed... From my personal
opinion, the VLA programming model could add ambiquity and complexity to
compiler because it is not concrete type at compile time... I am not expert for
SVE and VLA. I could miss something important. If I missed something, please let
me know.
SVE doesn't have a prescribed vector length -- the size of a vector register
is hardware dependent, and a single compiled VLA loop will execute correctly on
hardware with different vector lengths. So if you ran the same code on a cpu
with 128b SVE vectors and another with 256b vectors, you have the potential to
double the work done per cycle on the second cpu without changing the code
(there's lots of factors that could prevent performance from scaling nicely,
but that's not directly related to the vector length). SVE's current
maximum defined size is 2048b, though I suspect it'll be a quite a while
before we see vectors of that size in commodity hardware. Fujitsu's A64FX
will use 512b vectors.

We used predication in the example to show a loop without a scalar tail, but
it's not necessary to use the ISA in that manner.

The RISC-V V extension is similar, though has a few extra bits to worry about.
You'll need to ask Robin Kruppe if you want more details on that.


As far as your question on memory layout is concerned, we don't expect many
base 'load' or 'store' instructions to be used for scalable
vector types, and for an extremely conservative approach you could consider such
a memory operation to potentially alias all memory in a given address space.
Instead, we expect to always use masked load and store intrinsics (or
gather/scatter intrinsics), and we will need to improve parts of AA to take the
masks into account.


-Graham
> 
> Thanks,
> JinGu Kang
> 
> From: llvm-dev <llvm-dev-bounces at lists.llvm.org> on behalf of
JinGu Kang via llvm-dev <llvm-dev at lists.llvm.org>
> Sent: 24 May 2019 21:47
> To: Joel Jones; Chris Lattner; Hal Finkel; Jones, Joel; dag at cray.com;
Renato Golin; Kristof Beyls; Amara Emerson; Florian Hahn; Sander De Smalen;
Robin Kruppe; llvm-dev at lists.llvm.org; mkuper at google.com; Sjoerd Meijer;
Sam Parker; Graham Hunter
> Cc: nd
> Subject: Re: [llvm-dev] [EXT] Re: [RFC][SVE] Supporting SIMD instruction
sets with variable vector lengths
>  
> Hi Joel,
> 
> Thanks for your kind guide. 
> 
> >
https://community.arm.com/developer/tools-software/hpc/b/hpc-blog/posts/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
> 
> I will have a look the post.
> 
> > One key restriction is that certain storage classes can’t contain
scalable vector types, like statically allocated globals for example.
> 
> It was one of what I want to know.
> 
> Thanks,
> JinGu Kang
> From: Joel Jones <joelj at marvell.com>
> Sent: 24 May 2019 19:40
> To: JinGu Kang; Chris Lattner; Hal Finkel; Jones, Joel; dag at cray.com;
Renato Golin; Kristof Beyls; Amara Emerson; Florian Hahn; Sander De Smalen;
Robin Kruppe; llvm-dev at lists.llvm.org; mkuper at google.com; Sjoerd Meijer;
Sam Parker; Graham Hunter
> Cc: nd
> Subject: Re: [EXT] Re: [RFC][SVE] Supporting SIMD instruction sets with
variable vector lengths
>  
> JinGu:
>  
> I’m not Graham, but you might find the following link a good starting
point.
>  
>
https://community.arm.com/developer/tools-software/hpc/b/hpc-blog/posts/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
>  
> The question you ask doesn’t have a short answer. The compiler and the
instruction set design work together to allow programs to be compiled without
knowing until run-time what the vector width is (within limits of min and max
possible widths). One key restriction is that certain storage classes can’t
contain scalable vector types, like statically allocated globals for example.
>  
> Joel Jones
>  
> From: JinGu Kang <jingu at codeplay.com>
> Date: Friday, May 24, 2019 at 11:28 AM
> To: Chris Lattner <clattner at nondot.org>, Hal Finkel <hfinkel at
anl.gov>, "Jones, Joel" <Joel.Jones at cavium.com>, "dag
at cray.com" <dag at cray.com>, Renato Golin <renato.golin at
linaro.org>, Kristof Beyls <Kristof.Beyls at arm.com>, Amara Emerson
<aemerson at apple.com>, Florian Hahn <Florian.Hahn at arm.com>,
Sander De Smalen <Sander.DeSmalen at arm.com>, Robin Kruppe
<robin.kruppe at gmail.com>, "llvm-dev at lists.llvm.org"
<llvm-dev at lists.llvm.org>, "mkuper at google.com" <mkuper
at google.com>, Sjoerd Meijer <Sjoerd.Meijer at arm.com>, Sam Parker
<Sam.Parker at arm.com>, Graham Hunter <Graham.Hunter at arm.com>
> Cc: nd <nd at arm.com>
> Subject: [EXT] Re: [RFC][SVE] Supporting SIMD instruction sets with
variable vector lengths
>  
> External Email
> Hi Graham,
>  
> I am working on a custom target and it is considering scalable vector type
representation in programming language. While I am collecting the information
about it, I have met your RFC. I have a question. I think the one of fundamental
issues is that we do not know the memory layout of the type at compile time. I
am not sure whether the RFC covers this issue or not. Conservatively, I imagined
the memory layout of biggest type which the scalable vector type can support. I
could miss some discussions about it. If I missed something, please let me know.
>  
> Thanks,
> JinGu Kang
>  
> From: llvm-dev <llvm-dev-bounces at lists.llvm.org> on behalf of
Graham Hunter via llvm-dev <llvm-dev at lists.llvm.org>
> Sent: 05 June 2018 14:15
> To: Chris Lattner; Hal Finkel; Jones, Joel; dag at cray.com; Renato Golin;
Kristof Beyls; Amara Emerson; Florian Hahn; Sander De Smalen; Robin Kruppe;
llvm-dev at lists.llvm.org; mkuper at google.com; Sjoerd Meijer; Sam Parker
> Cc: nd
> Subject: [llvm-dev] [RFC][SVE] Supporting SIMD instruction sets with
variable vector lengths
>  
> Hi,
> 
> Now that Sander has committed enough MC support for SVE, here's an
updated
> RFC for variable length vector support with a set of 14 patches (listed at
the end)
> to demonstrate code generation for SVE using the extensions proposed in the
RFC.
> 
> I have some ideas about how to support RISC-V's upcoming extension
alongside
> SVE; I'll send an email with some additional comments on Robin's
RFC later.
> 
> Feedback and questions welcome.
> 
> -Graham
> 
> ============================================================> Supporting
SIMD instruction sets with variable vector lengths
> ============================================================> 
> In this RFC we propose extending LLVM IR to support code-generation for
variable
> length vector architectures like Arm's SVE or RISC-V's 'V'
extension. Our
> approach is backwards compatible and should be as non-intrusive as
possible; the
> only change needed in other backends is how size is queried on vector
types, and
> it only requires a change in which function is called. We have created a
set of
> proof-of-concept patches to represent a simple vectorized loop in IR and
> generate SVE instructions from that IR. These patches (listed in section 7
of
> this rfc) can be found on Phabricator and are intended to illustrate the
scope
> of changes required by the general approach described in this RFC.
> 
> =========> Background
> =========> 
> *ARMv8-A Scalable Vector Extensions* (SVE) is a new vector ISA extension
for
> AArch64 which is intended to scale with hardware such that the same binary
> running on a processor with longer vector registers can take advantage of
the
> increased compute power without recompilation.
> 
> As the vector length is no longer a compile-time known value, the way in
which
> the LLVM vectorizer generates code requires modifications such that certain
> values are now runtime evaluated expressions instead of compile-time
constants.
> 
> Documentation for SVE can be found at
>
https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
> 
> =======> Contents
> =======> 
> The rest of this RFC covers the following topics:
> 
> 1. Types -- a proposal to extend VectorType to be able to represent vectors
that
>    have a length which is a runtime-determined multiple of a known base
length.
> 
> 2. Size Queries - how to reason about the size of types for which the size
isn't
>    fully known at compile time.
> 
> 3. Representing the runtime multiple of vector length in IR for use in
address
>    calculations and induction variable comparisons.
> 
> 4. Generating 'constant' values in IR for vectors with a
runtime-determined
>    number of elements.
> 
> 5. A brief note on code generation of these new operations for AArch64.
> 
> 6. An example of C code and matching IR using the proposed extensions.
> 
> 7. A list of patches demonstrating the changes required to emit SVE
instructions
>    for a loop that has already been vectorized using the extensions
described
>    in this RFC.
> 
> =======> 1. Types
> =======> 
> To represent a vector of unknown length a boolean `Scalable` property has
been
> added to the `VectorType` class, which indicates that the number of
elements in
> the vector is a runtime-determined integer multiple of the `NumElements`
field.
> Most code that deals with vectors doesn't need to know the exact
length, but
> does need to know relative lengths -- e.g. get a vector with the same
number of
> elements but a different element type, or with half or double the number of
> elements.
> 
> In order to allow code to transparently support scalable vectors, we
introduce
> an `ElementCount` class with two members:
> 
> - `unsigned Min`: the minimum number of elements.
> - `bool Scalable`: is the element count an unknown multiple of `Min`?
> 
> For non-scalable vectors (``Scalable=false``) the scale is considered to be
> equal to one and thus `Min` represents the exact number of elements in the
> vector.
> 
> The intent for code working with vectors is to use convenience methods and
avoid
> directly dealing with the number of elements. If needed, calling
> `getElementCount` on a vector type instead of `getVectorNumElements` can be
used
> to obtain the (potentially scalable) number of elements. Overloaded
division and
> multiplication operators allow an ElementCount instance to be used in much
the
> same manner as an integer for most cases.
> 
> This mixture of compile-time and runtime quantities allow us to reason
about the
> relationship between different scalable vector types without knowing their
> exact length.
> 
> The runtime multiple is not expected to change during program execution for
SVE,
> but it is possible. The model of scalable vectors presented in this RFC
assumes
> that the multiple will be constant within a function but not necessarily
across
> functions. As suggested in the recent RISC-V rfc, a new function attribute
to
> inherit the multiple across function calls will allow for function calls
with
> vector arguments/return values and inlining/outlining optimizations.
> 
> IR Textual Form
> ---------------
> 
> The textual form for a scalable vector is:
> 
> ``<scalable <n> x <type>>``
> 
> where `type` is the scalar type of each element, `n` is the minimum number
of
> elements, and the string literal `scalable` indicates that the total number
of
> elements is an unknown multiple of `n`; `scalable` is just an arbitrary
choice
> for indicating that the vector is scalable, and could be substituted by
another.
> For fixed-length vectors, the `scalable` is omitted, so there is no change
in
> the format for existing vectors.
> 
> Scalable vectors with the same `Min` value have the same number of
elements, and
> the same number of bytes if `Min * sizeof(type)` is the same (assuming they
are
> used within the same function):
> 
> ``<scalable 4 x i32>`` and ``<scalable 4 x i8>`` have the same
number of
>   elements.
> 
> ``<scalable x 4 x i32>`` and ``<scalable x 8 x i16>`` have the
same number of
>   bytes.
> 
> IR Bitcode Form
> ---------------
> 
> To serialize scalable vectors to bitcode, a new boolean field is added to
the
> type record. If the field is not present the type will default to a
fixed-length
> vector type, preserving backwards compatibility.
> 
> Alternatives Considered
> -----------------------
> 
> We did consider one main alternative -- a dedicated target type, like the
> x86_mmx type.
> 
> A dedicated target type would either need to extend all existing passes
that
> work with vectors to recognize the new type, or to duplicate all that code
> in order to get reasonable code generation and autovectorization.
> 
> This hasn't been done for the x86_mmx type, and so it is only capable
of
> providing support for C-level intrinsics instead of being used and
recognized by
> passes inside llvm.
> 
> Although our current solution will need to change some of the code that
creates
> new VectorTypes, much of that code doesn't need to care about whether
the types
> are scalable or not -- they can use preexisting methods like
> `getHalfElementsVectorType`. If the code is a little more complex,
> `ElementCount` structs can be used instead of an `unsigned` value to
represent
> the number of elements.
> 
> ==============> 2. Size Queries
> ==============> 
> This is a proposal for how to deal with querying the size of scalable
types.
> While it has not been implemented in full, the general approach works well
> for calculating offsets into structures with scalable types in a modified
> version of ComputeValueVTs in our downstream compiler.
> 
> Current IR types that have a known size all return a single integer
constant.
> For scalable types a second integer is needed to indicate the number of
bytes
> which need to be scaled by the runtime multiple to obtain the actual
length.
> 
> For primitive types, getPrimitiveSizeInBits will function as it does today,
> except that it will no longer return a size for vector types (it will
return 0,
> as it does for other derived types). The majority of calls to this function
are
> already for scalar rather than vector types.
> 
> For derived types, a function (getSizeExpressionInBits) to return a pair of
> integers (one to indicate unscaled bits, the other for bits that need to be
> scaled by the runtime multiple) will be added. For backends that do not
need to
> deal with scalable types, another function (getFixedSizeExpressionInBits)
that
> only returns unscaled bits will be provided, with a debug assert that the
type
> isn't scalable.
> 
> Similar functionality will be added to DataLayout.
> 
> Comparing two of these sizes together is straightforward if only unscaled
sizes
> are used. Comparisons between scaled sizes is also simple when comparing
sizes
> within a function (or across functions with the inherit flag mentioned in
the
> changes to the type), but cannot be compared otherwise. If a mix is
present,
> then any number of unscaled bits will not be considered to have a greater
size
> than a smaller number of scaled bits, but a smaller number of unscaled bits
> will be considered to have a smaller size than a greater number of scaled
bits
> (since the runtime multiple is at least one).
> 
> Future Work
> -----------
> 
> Since we cannot determine the exact size of a scalable vector, the
> existing logic for alias detection won't work when multiple accesses
> share a common base pointer with different offsets.
> 
> However, SVE's predication will mean that a dynamic 'safe'
vector length
> can be determined at runtime, so after initial support has been added we
> can work on vectorizing loops using runtime predication to avoid aliasing
> problems.
> 
> Alternatives Considered
> -----------------------
> 
> Marking scalable vectors as unsized doesn't work well, as many parts of
> llvm dealing with loads and stores assert that 'isSized()' returns
true
> and make use of the size when calculating offsets.
> 
> We have considered introducing multiple helper functions instead of
> using direct size queries, but that doesn't cover all cases. It may
> still be a good idea to introduce them to make the purpose in a given
> case more obvious, e.g. 'isBitCastableTo(Type*,Type*)'.
> 
> =======================================> 3. Representing Vector Length
at Runtime
> =======================================> 
> With a scalable vector type defined, we now need a way to represent the
runtime
> length in IR in order to generate addresses for consecutive vectors in
memory
> and determine how many elements have been processed in an iteration of a
loop.
> 
> We have added an experimental `vscale` intrinsic to represent the runtime
> multiple. Multiplying the result of this intrinsic by the minimum number of
> elements in a vector gives the total number of elements in a scalable
vector.
> 
> Fixed-Length Code
> -----------------
> 
> Assuming a vector type of <4 x <ty>>
> ``
> vector.body:
>   %index = phi i64 [ %index.next, %vector.body ], [ 0,
%vector.body.preheader ]
>   ;; <loop body>
>   ;; Increment induction var
>   %index.next = add i64 %index, 4
>   ;; <check and branch>
> ``
> Scalable Equivalent
> -------------------
> 
> Assuming a vector type of <scalable 4 x <ty>>
> ``
> vector.body:
>   %index = phi i64 [ %index.next, %vector.body ], [ 0,
%vector.body.preheader ]
>   ;; <loop body>
>   ;; Increment induction var
>   %vscale64 = call i64 @llvm.experimental.vector.vscale.64()
>   %index.next = add i64 %index, mul (i64 %vscale64, i64 4)
>   ;; <check and branch>
> ``
> ==========================> 4. Generating Vector Values
> ==========================> For constant vector values, we cannot
specify all the elements as we can for
> fixed-length vectors; fortunately only a small number of easily synthesized
> patterns are required for autovectorization. The `zeroinitializer` constant
> can be used in the same manner as fixed-length vectors for a constant zero
> splat. This can then be combined with `insertelement` and `shufflevector`
> to create arbitrary value splats in the same manner as fixed-length
vectors.
> 
> For constants consisting of a sequence of values, an experimental
`stepvector`
> intrinsic has been added to represent a simple constant of the form
> `<0, 1, 2... num_elems-1>`. To change the starting value a splat of
the new
> start can be added, and changing the step requires multiplying by a splat.
> 
> Fixed-Length Code
> -----------------
> ``
>   ;; Splat a value
>   %insert = insertelement <4 x i32> undef, i32 %value, i32 0
>   %splat = shufflevector <4 x i32> %insert, <4 x i32> undef,
<4 x i32> zeroinitializer
>   ;; Add a constant sequence
>   %add = add <4 x i32> %splat, <i32 2, i32 4, i32 6, i32 8>
> ``
> Scalable Equivalent
> -------------------
> ``
>   ;; Splat a value
>   %insert = insertelement <scalable 4 x i32> undef, i32 %value, i32 0
>   %splat = shufflevector <scalable 4 x i32> %insert, <scalable 4 x
i32> undef, <scalable 4 x i32> zeroinitializer
>   ;; Splat offset + stride (the same in this case)
>   %insert2 = insertelement <scalable 4 x i32> under, i32 2, i32 0
>   %str_off = shufflevector <scalable 4 x i32> %insert2, <scalable
4 x i32> undef, <scalable 4 x i32> zeroinitializer
>   ;; Create sequence for scalable vector
>   %stepvector = call <scalable 4 x i32>
@llvm.experimental.vector.stepvector.nxv4i32()
>   %mulbystride = mul <scalable 4 x i32> %stepvector, %str_off
>   %addoffset = add <scalable 4 x i32> %mulbystride, %str_off
>   ;; Add the runtime-generated sequence
>   %add = add <scalable 4 x i32> %splat, %addoffset
> ``
> Future Work
> -----------
> 
> Intrinsics cannot currently be used for constant folding. Our downstream
> compiler (using Constants instead of intrinsics) relies quite heavily on
this
> for good code generation, so we will need to find new ways to recognize and
> fold these values.
> 
> =================> 5. Code Generation
> =================> 
> IR splats will be converted to an experimental splatvector intrinsic in
> SelectionDAGBuilder.
> 
> All three intrinsics are custom lowered and legalized in the AArch64
backend.
> 
> Two new AArch64ISD nodes have been added to represent the same concepts
> at the SelectionDAG level, while splatvector maps onto the existing
> AArch64ISD::DUP.
> 
> GlobalISel
> ----------
> 
> Since GlobalISel was enabled by default on AArch64, it was necessary to add
> scalable vector support to the LowLevelType implementation. A single bit
was
> added to the raw_data representation for vectors and vectors of pointers.
> 
> In addition, types that only exist in destination patterns are planted in
> the enumeration of available types for generated code. While this may not
be
> necessary in future, generating an all-true 'ptrue' value was
necessary to
> convert a predicated instruction into an unpredicated one.
> 
> =========> 6. Example
> =========> 
> The following example shows a simple C loop which assigns the array index
to
> the array elements matching that index. The IR shows how vscale and
stepvector
> are used to create the needed values and to advance the index variable in
the
> loop.
> 
> C Code
> ------
> 
> ``
> void IdentityArrayInit(int *a, int count) {
>   for (int i = 0; i < count; ++i)
>     a[i] = i;
> }
> ``
> 
> Scalable IR Vector Body
> -----------------------
> 
> ``
> vector.body.preheader:
>   ;; Other setup
>   ;; Stepvector used to create initial identity vector
>   %stepvector = call <scalable 4 x i32>
@llvm.experimental.vector.stepvector.nxv4i32()
>   br vector.body
> 
> vector.body
>   %index = phi i64 [ %index.next, %vector.body ], [ 0,
%vector.body.preheader ]
>   %0 = phi i64 [ %1, %vector.body ], [ 0, %vector.body.preheader ]
> 
>            ;; stepvector used for index identity on entry to loop body ;;
>   %vec.ind7 = phi <scalable 4 x i32> [ %step.add8, %vector.body ],
>                                      [ %stepvector, %vector.body.preheader
]
>   %vscale64 = call i64 @llvm.experimental.vector.vscale.64()
>   %vscale32 = trunc i64 %vscale64 to i32
>   %1 = add i64 %0, mul (i64 %vscale64, i64 4)
> 
>            ;; vscale splat used to increment identity vector ;;
>   %insert = insertelement <scalable 4 x i32> undef, i32 mul (i32
%vscale32, i32 4), i32 0
>   %splat shufflevector <scalable 4 x i32> %insert, <scalable 4 x
i32> undef, <scalable 4 x i32> zeroinitializer
>   %step.add8 = add <scalable 4 x i32> %vec.ind7, %splat
>   %2 = getelementptr inbounds i32, i32* %a, i64 %0
>   %3 = bitcast i32* %2 to <scalable 4 x i32>*
>   store <scalable 4 x i32> %vec.ind7, <scalable 4 x i32>* %3,
align 4
> 
>            ;; vscale used to increment loop index
>   %index.next = add i64 %index, mul (i64 %vscale64, i64 4)
>   %4 = icmp eq i64 %index.next, %n.vec
>   br i1 %4, label %middle.block, label %vector.body, !llvm.loop !5
> ``
> 
> =========> 7. Patches
> =========> 
> List of patches:
> 
> 1. Extend VectorType: https://reviews.llvm.org/D32530
> 2. Vector element type Tablegen constraint: https://reviews.llvm.org/D47768
> 3. LLT support for scalable vectors: https://reviews.llvm.org/D47769
> 4. EVT strings and Type mapping: https://reviews.llvm.org/D47770
> 5. SVE Calling Convention: https://reviews.llvm.org/D47771
> 6. Intrinsic lowering cleanup: https://reviews.llvm.org/D47772
> 7. Add VScale intrinsic: https://reviews.llvm.org/D47773
> 8. Add StepVector intrinsic: https://reviews.llvm.org/D47774
> 9. Add SplatVector intrinsic: https://reviews.llvm.org/D47775
> 10. Initial store patterns: https://reviews.llvm.org/D47776
> 11. Initial addition patterns: https://reviews.llvm.org/D47777
> 12. Initial left-shift patterns: https://reviews.llvm.org/D47778
> 13. Implement copy logic for Z regs: https://reviews.llvm.org/D47779
> 14. Prevectorized loop unit test: https://reviews.llvm.org/D47780
> 
> _______________________________________________
> LLVM Developers mailing list
> llvm-dev at lists.llvm.org
> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev

Hi Graham,

Thanks for your kind explanation.

There was internal discussion about it. If possible, can you let me know the
Clang/LLVM CodeGen patches for the vector type on phabricator please? I would
like to check what kinds of the restrictions the type causes on Clang/LLVM.

Thanks,
JinGu Kang

________________________________
From: Graham Hunter <Graham.Hunter at arm.com>
Sent: 28 May 2019 10:46
To: JinGu Kang
Cc: Joel Jones; Chris Lattner; Hal Finkel; Jones, Joel; dag at cray.com; Renato
Golin; Kristof Beyls; Amara Emerson; Florian Hahn; Sander De Smalen; Robin
Kruppe; llvm-dev at lists.llvm.org; mkuper at google.com; Sjoerd Meijer; Sam
Parker; nd
Subject: Re: [EXT] Re: [RFC][SVE] Supporting SIMD instruction sets with variable
vector lengths

Hi JinGu,
> Above vectorized loop does not need tail loop. I guess we could map the
%mask.vec to predicate register as native register class on ISelLowering level.
The conditional branch could also be mapped to 'whilexx' and 'b.xxx
on MIR level. In order to get vector type, we could calculate cost model for
target as llvm's vectorizers. If SVE focuses on loop vectorization mainly, I
am not sure why the scalarable vector type is needed... From my personal
opinion, the VLA programming model could add ambiquity and complexity to
compiler because it is not concrete type at compile time... I am not expert for
SVE and VLA. I could miss something important. If I missed something, please let
me know.
SVE doesn't have a prescribed vector length -- the size of a vector register
is hardware dependent, and a single compiled VLA loop will execute correctly on
hardware with different vector lengths. So if you ran the same code on a cpu
with 128b SVE vectors and another with 256b vectors, you have the potential to
double the work done per cycle on the second cpu without changing the code
(there's lots of factors that could prevent performance from scaling nicely,
but that's not directly related to the vector length). SVE's current
maximum defined size is 2048b, though I suspect it'll be a quite a while
before we see vectors of that size in commodity hardware. Fujitsu's A64FX
will use 512b vectors.

We used predication in the example to show a loop without a scalar tail, but
it's not necessary to use the ISA in that manner.

The RISC-V V extension is similar, though has a few extra bits to worry about.
You'll need to ask Robin Kruppe if you want more details on that.


As far as your question on memory layout is concerned, we don't expect many
base 'load' or 'store' instructions to be used for scalable
vector types, and for an extremely conservative approach you could consider such
a memory operation to potentially alias all memory in a given address space.
Instead, we expect to always use masked load and store intrinsics (or
gather/scatter intrinsics), and we will need to improve parts of AA to take the
masks into account.


-Graham
>
> Thanks,
> JinGu Kang
>
> From: llvm-dev <llvm-dev-bounces at lists.llvm.org> on behalf of
JinGu Kang via llvm-dev <llvm-dev at lists.llvm.org>
> Sent: 24 May 2019 21:47
> To: Joel Jones; Chris Lattner; Hal Finkel; Jones, Joel; dag at cray.com;
Renato Golin; Kristof Beyls; Amara Emerson; Florian Hahn; Sander De Smalen;
Robin Kruppe; llvm-dev at lists.llvm.org; mkuper at google.com; Sjoerd Meijer;
Sam Parker; Graham Hunter
> Cc: nd
> Subject: Re: [llvm-dev] [EXT] Re: [RFC][SVE] Supporting SIMD instruction
sets with variable vector lengths
>
> Hi Joel,
>
> Thanks for your kind guide.
>
> >
https://community.arm.com/developer/tools-software/hpc/b/hpc-blog/posts/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
>
> I will have a look the post.
>
> > One key restriction is that certain storage classes can’t contain
scalable vector types, like statically allocated globals for example.
>
> It was one of what I want to know.
>
> Thanks,
> JinGu Kang
> From: Joel Jones <joelj at marvell.com>
> Sent: 24 May 2019 19:40
> To: JinGu Kang; Chris Lattner; Hal Finkel; Jones, Joel; dag at cray.com;
Renato Golin; Kristof Beyls; Amara Emerson; Florian Hahn; Sander De Smalen;
Robin Kruppe; llvm-dev at lists.llvm.org; mkuper at google.com; Sjoerd Meijer;
Sam Parker; Graham Hunter
> Cc: nd
> Subject: Re: [EXT] Re: [RFC][SVE] Supporting SIMD instruction sets with
variable vector lengths
>
> JinGu:
>
> I’m not Graham, but you might find the following link a good starting
point.
>
>
https://community.arm.com/developer/tools-software/hpc/b/hpc-blog/posts/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
>
> The question you ask doesn’t have a short answer. The compiler and the
instruction set design work together to allow programs to be compiled without
knowing until run-time what the vector width is (within limits of min and max
possible widths). One key restriction is that certain storage classes can’t
contain scalable vector types, like statically allocated globals for example.
>
> Joel Jones
>
> From: JinGu Kang <jingu at codeplay.com>
> Date: Friday, May 24, 2019 at 11:28 AM
> To: Chris Lattner <clattner at nondot.org>, Hal Finkel <hfinkel at
anl.gov>, "Jones, Joel" <Joel.Jones at cavium.com>, "dag
at cray.com" <dag at cray.com>, Renato Golin <renato.golin at
linaro.org>, Kristof Beyls <Kristof.Beyls at arm.com>, Amara Emerson
<aemerson at apple.com>, Florian Hahn <Florian.Hahn at arm.com>,
Sander De Smalen <Sander.DeSmalen at arm.com>, Robin Kruppe
<robin.kruppe at gmail.com>, "llvm-dev at lists.llvm.org"
<llvm-dev at lists.llvm.org>, "mkuper at google.com" <mkuper
at google.com>, Sjoerd Meijer <Sjoerd.Meijer at arm.com>, Sam Parker
<Sam.Parker at arm.com>, Graham Hunter <Graham.Hunter at arm.com>
> Cc: nd <nd at arm.com>
> Subject: [EXT] Re: [RFC][SVE] Supporting SIMD instruction sets with
variable vector lengths
>
> External Email
> Hi Graham,
>
> I am working on a custom target and it is considering scalable vector type
representation in programming language. While I am collecting the information
about it, I have met your RFC. I have a question. I think the one of fundamental
issues is that we do not know the memory layout of the type at compile time. I
am not sure whether the RFC covers this issue or not. Conservatively, I imagined
the memory layout of biggest type which the scalable vector type can support. I
could miss some discussions about it. If I missed something, please let me know.
>
> Thanks,
> JinGu Kang
>
> From: llvm-dev <llvm-dev-bounces at lists.llvm.org> on behalf of
Graham Hunter via llvm-dev <llvm-dev at lists.llvm.org>
> Sent: 05 June 2018 14:15
> To: Chris Lattner; Hal Finkel; Jones, Joel; dag at cray.com; Renato Golin;
Kristof Beyls; Amara Emerson; Florian Hahn; Sander De Smalen; Robin Kruppe;
llvm-dev at lists.llvm.org; mkuper at google.com; Sjoerd Meijer; Sam Parker
> Cc: nd
> Subject: [llvm-dev] [RFC][SVE] Supporting SIMD instruction sets with
variable vector lengths
>
> Hi,
>
> Now that Sander has committed enough MC support for SVE, here's an
updated
> RFC for variable length vector support with a set of 14 patches (listed at
the end)
> to demonstrate code generation for SVE using the extensions proposed in the
RFC.
>
> I have some ideas about how to support RISC-V's upcoming extension
alongside
> SVE; I'll send an email with some additional comments on Robin's
RFC later.
>
> Feedback and questions welcome.
>
> -Graham
>
> ============================================================> Supporting
SIMD instruction sets with variable vector lengths
> ============================================================>
> In this RFC we propose extending LLVM IR to support code-generation for
variable
> length vector architectures like Arm's SVE or RISC-V's 'V'
extension. Our
> approach is backwards compatible and should be as non-intrusive as
possible; the
> only change needed in other backends is how size is queried on vector
types, and
> it only requires a change in which function is called. We have created a
set of
> proof-of-concept patches to represent a simple vectorized loop in IR and
> generate SVE instructions from that IR. These patches (listed in section 7
of
> this rfc) can be found on Phabricator and are intended to illustrate the
scope
> of changes required by the general approach described in this RFC.
>
> =========> Background
> =========>
> *ARMv8-A Scalable Vector Extensions* (SVE) is a new vector ISA extension
for
> AArch64 which is intended to scale with hardware such that the same binary
> running on a processor with longer vector registers can take advantage of
the
> increased compute power without recompilation.
>
> As the vector length is no longer a compile-time known value, the way in
which
> the LLVM vectorizer generates code requires modifications such that certain
> values are now runtime evaluated expressions instead of compile-time
constants.
>
> Documentation for SVE can be found at
>
https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
>
> =======> Contents
> =======>
> The rest of this RFC covers the following topics:
>
> 1. Types -- a proposal to extend VectorType to be able to represent vectors
that
>    have a length which is a runtime-determined multiple of a known base
length.
>
> 2. Size Queries - how to reason about the size of types for which the size
isn't
>    fully known at compile time.
>
> 3. Representing the runtime multiple of vector length in IR for use in
address
>    calculations and induction variable comparisons.
>
> 4. Generating 'constant' values in IR for vectors with a
runtime-determined
>    number of elements.
>
> 5. A brief note on code generation of these new operations for AArch64.
>
> 6. An example of C code and matching IR using the proposed extensions.
>
> 7. A list of patches demonstrating the changes required to emit SVE
instructions
>    for a loop that has already been vectorized using the extensions
described
>    in this RFC.
>
> =======> 1. Types
> =======>
> To represent a vector of unknown length a boolean `Scalable` property has
been
> added to the `VectorType` class, which indicates that the number of
elements in
> the vector is a runtime-determined integer multiple of the `NumElements`
field.
> Most code that deals with vectors doesn't need to know the exact
length, but
> does need to know relative lengths -- e.g. get a vector with the same
number of
> elements but a different element type, or with half or double the number of
> elements.
>
> In order to allow code to transparently support scalable vectors, we
introduce
> an `ElementCount` class with two members:
>
> - `unsigned Min`: the minimum number of elements.
> - `bool Scalable`: is the element count an unknown multiple of `Min`?
>
> For non-scalable vectors (``Scalable=false``) the scale is considered to be
> equal to one and thus `Min` represents the exact number of elements in the
> vector.
>
> The intent for code working with vectors is to use convenience methods and
avoid
> directly dealing with the number of elements. If needed, calling
> `getElementCount` on a vector type instead of `getVectorNumElements` can be
used
> to obtain the (potentially scalable) number of elements. Overloaded
division and
> multiplication operators allow an ElementCount instance to be used in much
the
> same manner as an integer for most cases.
>
> This mixture of compile-time and runtime quantities allow us to reason
about the
> relationship between different scalable vector types without knowing their
> exact length.
>
> The runtime multiple is not expected to change during program execution for
SVE,
> but it is possible. The model of scalable vectors presented in this RFC
assumes
> that the multiple will be constant within a function but not necessarily
across
> functions. As suggested in the recent RISC-V rfc, a new function attribute
to
> inherit the multiple across function calls will allow for function calls
with
> vector arguments/return values and inlining/outlining optimizations.
>
> IR Textual Form
> ---------------
>
> The textual form for a scalable vector is:
>
> ``<scalable <n> x <type>>``
>
> where `type` is the scalar type of each element, `n` is the minimum number
of
> elements, and the string literal `scalable` indicates that the total number
of
> elements is an unknown multiple of `n`; `scalable` is just an arbitrary
choice
> for indicating that the vector is scalable, and could be substituted by
another.
> For fixed-length vectors, the `scalable` is omitted, so there is no change
in
> the format for existing vectors.
>
> Scalable vectors with the same `Min` value have the same number of
elements, and
> the same number of bytes if `Min * sizeof(type)` is the same (assuming they
are
> used within the same function):
>
> ``<scalable 4 x i32>`` and ``<scalable 4 x i8>`` have the same
number of
>   elements.
>
> ``<scalable x 4 x i32>`` and ``<scalable x 8 x i16>`` have the
same number of
>   bytes.
>
> IR Bitcode Form
> ---------------
>
> To serialize scalable vectors to bitcode, a new boolean field is added to
the
> type record. If the field is not present the type will default to a
fixed-length
> vector type, preserving backwards compatibility.
>
> Alternatives Considered
> -----------------------
>
> We did consider one main alternative -- a dedicated target type, like the
> x86_mmx type.
>
> A dedicated target type would either need to extend all existing passes
that
> work with vectors to recognize the new type, or to duplicate all that code
> in order to get reasonable code generation and autovectorization.
>
> This hasn't been done for the x86_mmx type, and so it is only capable
of
> providing support for C-level intrinsics instead of being used and
recognized by
> passes inside llvm.
>
> Although our current solution will need to change some of the code that
creates
> new VectorTypes, much of that code doesn't need to care about whether
the types
> are scalable or not -- they can use preexisting methods like
> `getHalfElementsVectorType`. If the code is a little more complex,
> `ElementCount` structs can be used instead of an `unsigned` value to
represent
> the number of elements.
>
> ==============> 2. Size Queries
> ==============>
> This is a proposal for how to deal with querying the size of scalable
types.
> While it has not been implemented in full, the general approach works well
> for calculating offsets into structures with scalable types in a modified
> version of ComputeValueVTs in our downstream compiler.
>
> Current IR types that have a known size all return a single integer
constant.
> For scalable types a second integer is needed to indicate the number of
bytes
> which need to be scaled by the runtime multiple to obtain the actual
length.
>
> For primitive types, getPrimitiveSizeInBits will function as it does today,
> except that it will no longer return a size for vector types (it will
return 0,
> as it does for other derived types). The majority of calls to this function
are
> already for scalar rather than vector types.
>
> For derived types, a function (getSizeExpressionInBits) to return a pair of
> integers (one to indicate unscaled bits, the other for bits that need to be
> scaled by the runtime multiple) will be added. For backends that do not
need to
> deal with scalable types, another function (getFixedSizeExpressionInBits)
that
> only returns unscaled bits will be provided, with a debug assert that the
type
> isn't scalable.
>
> Similar functionality will be added to DataLayout.
>
> Comparing two of these sizes together is straightforward if only unscaled
sizes
> are used. Comparisons between scaled sizes is also simple when comparing
sizes
> within a function (or across functions with the inherit flag mentioned in
the
> changes to the type), but cannot be compared otherwise. If a mix is
present,
> then any number of unscaled bits will not be considered to have a greater
size
> than a smaller number of scaled bits, but a smaller number of unscaled bits
> will be considered to have a smaller size than a greater number of scaled
bits
> (since the runtime multiple is at least one).
>
> Future Work
> -----------
>
> Since we cannot determine the exact size of a scalable vector, the
> existing logic for alias detection won't work when multiple accesses
> share a common base pointer with different offsets.
>
> However, SVE's predication will mean that a dynamic 'safe'
vector length
> can be determined at runtime, so after initial support has been added we
> can work on vectorizing loops using runtime predication to avoid aliasing
> problems.
>
> Alternatives Considered
> -----------------------
>
> Marking scalable vectors as unsized doesn't work well, as many parts of
> llvm dealing with loads and stores assert that 'isSized()' returns
true
> and make use of the size when calculating offsets.
>
> We have considered introducing multiple helper functions instead of
> using direct size queries, but that doesn't cover all cases. It may
> still be a good idea to introduce them to make the purpose in a given
> case more obvious, e.g. 'isBitCastableTo(Type*,Type*)'.
>
> =======================================> 3. Representing Vector Length
at Runtime
> =======================================>
> With a scalable vector type defined, we now need a way to represent the
runtime
> length in IR in order to generate addresses for consecutive vectors in
memory
> and determine how many elements have been processed in an iteration of a
loop.
>
> We have added an experimental `vscale` intrinsic to represent the runtime
> multiple. Multiplying the result of this intrinsic by the minimum number of
> elements in a vector gives the total number of elements in a scalable
vector.
>
> Fixed-Length Code
> -----------------
>
> Assuming a vector type of <4 x <ty>>
> ``
> vector.body:
>   %index = phi i64 [ %index.next, %vector.body ], [ 0,
%vector.body.preheader ]
>   ;; <loop body>
>   ;; Increment induction var
>   %index.next = add i64 %index, 4
>   ;; <check and branch>
> ``
> Scalable Equivalent
> -------------------
>
> Assuming a vector type of <scalable 4 x <ty>>
> ``
> vector.body:
>   %index = phi i64 [ %index.next, %vector.body ], [ 0,
%vector.body.preheader ]
>   ;; <loop body>
>   ;; Increment induction var
>   %vscale64 = call i64 @llvm.experimental.vector.vscale.64()
>   %index.next = add i64 %index, mul (i64 %vscale64, i64 4)
>   ;; <check and branch>
> ``
> ==========================> 4. Generating Vector Values
> ==========================> For constant vector values, we cannot
specify all the elements as we can for
> fixed-length vectors; fortunately only a small number of easily synthesized
> patterns are required for autovectorization. The `zeroinitializer` constant
> can be used in the same manner as fixed-length vectors for a constant zero
> splat. This can then be combined with `insertelement` and `shufflevector`
> to create arbitrary value splats in the same manner as fixed-length
vectors.
>
> For constants consisting of a sequence of values, an experimental
`stepvector`
> intrinsic has been added to represent a simple constant of the form
> `<0, 1, 2... num_elems-1>`. To change the starting value a splat of
the new
> start can be added, and changing the step requires multiplying by a splat.
>
> Fixed-Length Code
> -----------------
> ``
>   ;; Splat a value
>   %insert = insertelement <4 x i32> undef, i32 %value, i32 0
>   %splat = shufflevector <4 x i32> %insert, <4 x i32> undef,
<4 x i32> zeroinitializer
>   ;; Add a constant sequence
>   %add = add <4 x i32> %splat, <i32 2, i32 4, i32 6, i32 8>
> ``
> Scalable Equivalent
> -------------------
> ``
>   ;; Splat a value
>   %insert = insertelement <scalable 4 x i32> undef, i32 %value, i32 0
>   %splat = shufflevector <scalable 4 x i32> %insert, <scalable 4 x
i32> undef, <scalable 4 x i32> zeroinitializer
>   ;; Splat offset + stride (the same in this case)
>   %insert2 = insertelement <scalable 4 x i32> under, i32 2, i32 0
>   %str_off = shufflevector <scalable 4 x i32> %insert2, <scalable
4 x i32> undef, <scalable 4 x i32> zeroinitializer
>   ;; Create sequence for scalable vector
>   %stepvector = call <scalable 4 x i32>
@llvm.experimental.vector.stepvector.nxv4i32()
>   %mulbystride = mul <scalable 4 x i32> %stepvector, %str_off
>   %addoffset = add <scalable 4 x i32> %mulbystride, %str_off
>   ;; Add the runtime-generated sequence
>   %add = add <scalable 4 x i32> %splat, %addoffset
> ``
> Future Work
> -----------
>
> Intrinsics cannot currently be used for constant folding. Our downstream
> compiler (using Constants instead of intrinsics) relies quite heavily on
this
> for good code generation, so we will need to find new ways to recognize and
> fold these values.
>
> =================> 5. Code Generation
> =================>
> IR splats will be converted to an experimental splatvector intrinsic in
> SelectionDAGBuilder.
>
> All three intrinsics are custom lowered and legalized in the AArch64
backend.
>
> Two new AArch64ISD nodes have been added to represent the same concepts
> at the SelectionDAG level, while splatvector maps onto the existing
> AArch64ISD::DUP.
>
> GlobalISel
> ----------
>
> Since GlobalISel was enabled by default on AArch64, it was necessary to add
> scalable vector support to the LowLevelType implementation. A single bit
was
> added to the raw_data representation for vectors and vectors of pointers.
>
> In addition, types that only exist in destination patterns are planted in
> the enumeration of available types for generated code. While this may not
be
> necessary in future, generating an all-true 'ptrue' value was
necessary to
> convert a predicated instruction into an unpredicated one.
>
> =========> 6. Example
> =========>
> The following example shows a simple C loop which assigns the array index
to
> the array elements matching that index. The IR shows how vscale and
stepvector
> are used to create the needed values and to advance the index variable in
the
> loop.
>
> C Code
> ------
>
> ``
> void IdentityArrayInit(int *a, int count) {
>   for (int i = 0; i < count; ++i)
>     a[i] = i;
> }
> ``
>
> Scalable IR Vector Body
> -----------------------
>
> ``
> vector.body.preheader:
>   ;; Other setup
>   ;; Stepvector used to create initial identity vector
>   %stepvector = call <scalable 4 x i32>
@llvm.experimental.vector.stepvector.nxv4i32()
>   br vector.body
>
> vector.body
>   %index = phi i64 [ %index.next, %vector.body ], [ 0,
%vector.body.preheader ]
>   %0 = phi i64 [ %1, %vector.body ], [ 0, %vector.body.preheader ]
>
>            ;; stepvector used for index identity on entry to loop body ;;
>   %vec.ind7 = phi <scalable 4 x i32> [ %step.add8, %vector.body ],
>                                      [ %stepvector, %vector.body.preheader
]
>   %vscale64 = call i64 @llvm.experimental.vector.vscale.64()
>   %vscale32 = trunc i64 %vscale64 to i32
>   %1 = add i64 %0, mul (i64 %vscale64, i64 4)
>
>            ;; vscale splat used to increment identity vector ;;
>   %insert = insertelement <scalable 4 x i32> undef, i32 mul (i32
%vscale32, i32 4), i32 0
>   %splat shufflevector <scalable 4 x i32> %insert, <scalable 4 x
i32> undef, <scalable 4 x i32> zeroinitializer
>   %step.add8 = add <scalable 4 x i32> %vec.ind7, %splat
>   %2 = getelementptr inbounds i32, i32* %a, i64 %0
>   %3 = bitcast i32* %2 to <scalable 4 x i32>*
>   store <scalable 4 x i32> %vec.ind7, <scalable 4 x i32>* %3,
align 4
>
>            ;; vscale used to increment loop index
>   %index.next = add i64 %index, mul (i64 %vscale64, i64 4)
>   %4 = icmp eq i64 %index.next, %n.vec
>   br i1 %4, label %middle.block, label %vector.body, !llvm.loop !5
> ``
>
> =========> 7. Patches
> =========>
> List of patches:
>
> 1. Extend VectorType: https://reviews.llvm.org/D32530
> 2. Vector element type Tablegen constraint: https://reviews.llvm.org/D47768
> 3. LLT support for scalable vectors: https://reviews.llvm.org/D47769
> 4. EVT strings and Type mapping: https://reviews.llvm.org/D47770
> 5. SVE Calling Convention: https://reviews.llvm.org/D47771
> 6. Intrinsic lowering cleanup: https://reviews.llvm.org/D47772
> 7. Add VScale intrinsic: https://reviews.llvm.org/D47773
> 8. Add StepVector intrinsic: https://reviews.llvm.org/D47774
> 9. Add SplatVector intrinsic: https://reviews.llvm.org/D47775
> 10. Initial store patterns: https://reviews.llvm.org/D47776
> 11. Initial addition patterns: https://reviews.llvm.org/D47777
> 12. Initial left-shift patterns: https://reviews.llvm.org/D47778
> 13. Implement copy logic for Z regs: https://reviews.llvm.org/D47779
> 14. Prevectorized loop unit test: https://reviews.llvm.org/D47780
>
> _______________________________________________
> LLVM Developers mailing list
> llvm-dev at lists.llvm.org
> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20190603/0c08bbed/attachment-0001.html>