Hi! I've installed Centos 4.4 on a machine at work (it's a HP Proliant DL-320 G2 rackmout server that serves my desktop). In recent days (Centos 4.4 has only been installed for a little over a week), like, since Wed or Thu last week, every time I reboot Kudzu wants to remove the network adaptors then reinstall them and breaks the network. I've gone to the point of disabling one of the network ports in the BIOS (since I only use one of them anyway), and at first it worked when I rebooted, after doing the obligatory net configuration. Then the next time I rebooted Kudzu again wanted to remove and reinstall the network and it again didn't work after the reboot. Today I had to reboot again (because X went nutso and I lost my mouse pointer--I know, a reboot is overkill, don't remind me) and once again it broke the network when it rebooted. The network config GUI applet could not activate the net, it kept complaining that the MAC address of the adapter was not the one it expected. I removed (as the previous time) all the NETWORK items from /etc/sysconfig/hwconf and rebooted again, after which it came up. But I fully expect it to be broken yet again when I reboot next time. This machine ran RHEL WS 2.1 for something like 3 years and never had this kind of trouble, even with both ports enabled in the BIOS. I always used the tg3 driver that came with Linux, not the driver that HP offers. The only RPM I've installed that I got from HP is the one that installs "hpasm", because that's the one that turns the fans from "screaming jet engine" into "low roar". (this system contains a dozen or so small fans, all of which rotate at a gazillion rpm, all not quite the same speed, so you get a dozen slightly different pitches, causing heterodyning and the resultant throbbing along with the screaming if you don't use the hpasm module.) Suggestions please? -- ------------------------------------------------------------------------------- .---- Fred Smith / ( /__ ,__. __ __ / __ : / / / / /__) / / /__) .+' Home: fredex at fcshome.stoneham.ma.us / / (__ (___ (__(_ (___ / :__ 781-438-5471 -------------------------------- Jude 1:24,25 --------------------------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 191 bytes Desc: not available URL: <http://lists.centos.org/pipermail/centos/attachments/20060913/3f74061f/attachment-0002.sig>
Disable kudzu? fredex wrote:> Hi! > > I've installed Centos 4.4 on a machine at work (it's a HP Proliant DL-320 G2 > rackmout server that serves my desktop). > > In recent days (Centos 4.4 has only been installed for a little over a > week), like, since Wed or Thu last week, every time I reboot Kudzu wants > to remove the network adaptors then reinstall them and breaks the network. > > I've gone to the point of disabling one of the network ports in the BIOS > (since I only use one of them anyway), and at first it worked when I > rebooted, after doing the obligatory net configuration. > > Then the next time I rebooted Kudzu again wanted to remove and reinstall > the network and it again didn't work after the reboot. > > Today I had to reboot again (because X went nutso and I lost my mouse > pointer--I know, a reboot is overkill, don't remind me) and once again it > broke the network when it rebooted. The network config GUI applet could > not activate the net, it kept complaining that the MAC address of the > adapter was not the one it expected. I removed (as the previous time) > all the NETWORK items from /etc/sysconfig/hwconf and rebooted again, > after which it came up. > > But I fully expect it to be broken yet again when I reboot next time. > > This machine ran RHEL WS 2.1 for something like 3 years and never had > this kind of trouble, even with both ports enabled in the BIOS. I always > used the tg3 driver that came with Linux, not the driver that HP offers. > > The only RPM I've installed that I got from HP is the one that installs > "hpasm", because that's the one that turns the fans from "screaming jet > engine" into "low roar". > > (this system contains a dozen or so small fans, all of which rotate at a > gazillion rpm, all not quite the same speed, so you get a dozen slightly > different pitches, causing heterodyning and the resultant throbbing > along with the screaming if you don't use the hpasm module.) > > Suggestions please? > > > ------------------------------------------------------------------------ > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos-- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) Linux user #322099 Machines: 206822 256638 276825 http://counter.li.org/