search for: kudzu

Hi list!: A question about the refinement of the configuration: Always when I start a domain kudzu (hardware detection daemon) ask me for remove hardware. I answer yes, but in the next boot kudzu ask again. I''m guessing that kudzu is asking for remove the «real» drivers that are inside the domU because the domainU was created copying the dom0 system in the domU. How can I deal with pr...

Redhat has a 'Hardware Discovery Utility' called Kudzu. When I change cards, kudzu pops up and ask to remove/config the card. Most of the time kudzu has trouble recognizing the Digium Zaptel cards and calls them something wrong, like calling the TDM card a network card. I'm having a devil of a time getting 3 TE410P cards to come up with all gree...

...onfront any problems which might arise the first time after an update). And sure enough, when the machine came back up, the network didn't work. Luckilly, someone said (and I quote) 'mv /etc/sysconfig/networking-scripts/ifcfg-eth0.bak /etc/sysconfig/networking-scripts/ifcfg-eth0 and blame kudzu'... So, what did I do wrong, or what should I have done differently? What's the reasoning behind this? I'll bet there is some rationale, and I'd like to understand it. Thanks, Mike

...ut my question a the right place, but anyway.... I have 3 server LINUX with LVS (linux virtual server) I had to recompile my kernel cuz it was not supporting LVS. Since there, everything was going right. Then I''ve change the hard drive of the primairy LVS to an other computer, now i want KUDZU to detect my harware, but it doesn''t do anything....If i boot with the kernel not recompile, KUDZU work, but otherwise in KERNEL for LVS kudzu don''t start and now messages, it just do nothing..... Thx ! (sorry for my english ! It''s not very good) ______________________...

CentOS Errata and Bugfix Advisory 2011:4813 Upstream details at : http://bugs.centos.org/view.php?id=4813 The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: dfee867bc7f156474437990063967ba5 kudzu-1.2.57.1.26-1.el5.centos.1.x86_64.rpm 9e02a6877840554864be3d404395777d kudzu-devel-1.2.57.1.26-1.el5.centos.1.i386.rpm 7c65247e05a3e664ff8e682e69502586 kudzu-devel-1.2.57.1.26-1.el5.centos.1.x86_64.rpm Source: 794ca573847cf34f8f80b36f2205f562 kudzu-1.2.57.1.26-1.el5.centos.1.src.rpm -- Johnn...

CentOS Errata and Bugfix Advisory 2011:4813 Upstream details at : http://bugs.centos.org/view.php?id=4813 The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 108ab1d84f723ba8ed01c489b9d33df3 kudzu-1.2.57.1.26-1.el5.centos.1.i386.rpm 9d82d83151f2ca14dc44c06d0d79d4f5 kudzu-devel-1.2.57.1.26-1.el5.centos.1.i386.rpm Source: 794ca573847cf34f8f80b36f2205f562 kudzu-1.2.57.1.26-1.el5.centos.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freen...

Hi My card is working, but when I reboot the machine, most of the times it is not working, I get "ztcfg: ZT_CHANCONFIG failed on channel 1: No such device or address (6)" To make it work again I have to shut down, remove the card, reboot so kudzu will remove the config. shut down again, put the card back in, reboot, now kudzu see it, I choose "Ignore" and then it's working again (until the next reboot). I'm on WBEL 3.0 and the card is not sharing is IRQ. Is anybody else having this problem ? When kudzu see it (as a Jens...

I have newly installed a RedHat 4.0 EL rebuild. The install was done without the ISDN card present. After disabling kudzu and haldaemon I inserted the card. Stil that *(&$^&%$(&$^!!!!!! kudzu shit modified my config and is loading hisax, crc_ccit and isn modules. Even worse, they do not appear in /etc/modprobe.conf which means that that f*cking kudzu added the modules to initrd. I have googled for hou...

How do I get kudzu to still look for new equipment but stop checking to see if some devices are present or not? For example. I have an ATEN USB keyboard/mouse adapter. Sometimes at boot, it is not ready? or something and then kudzu asks if I want that in or not. Of course I want it in!!! I may have to unplug...

I took the dive and installed the CentosPlus kernel. I remembered that I could always boot with the old kernel if things went south. But on reboot, kudzu wanted to delete the Atheros config. I told it not to, but.... Would a simple 'freshen' of madwifi-0.9.1-24.el4.at.i386.rpm ? an rpm -qa |grep wifi returns: madwifi-kmdl-2.6.9-34.0.2.EL-0.9.1-24.el4.at madwifi-0.9.1-24.el4.at madwifi-hal-kmdl-2.6.9-34.0.2.EL-0.9.1-24.el4.at

When I have installed centOS, Kudzu says my network cards have been removed, and right after it finds them again and asks me to configure them? It looks like it is the same thing it finds that it just said was removed. There are 3 Relatek|RTL-8139/8139C/8139C+ cards in there and it is all of them it will remove and reconfigure. I...

...2.6.9-34.0.2, I have not been able to upgrade to the latest kernel. If I do, in about 8 hours, the system becomes sluggish almost unresponsive. Currently I am running 4.6 but with the kernel mentioned above. I think I may have figured out the problem. It seems when I reboot with the new kernel, kudzu runs and wants to configure a different driver for this card, Intel Pro/100. If it does, it will cause the problem I mentioned. If I don't let it update the driver, it seems to be fine. So my question is how can I force it to use the driver from kernel 2.6.9-34.0.2? Is it something I need t...

...having now is that the failed drive had ceased responding to SCSI commands and we have since rebooted the system which resulted in the tape drive being removed from our current hardware configuration and the system does not recognize the new tape drive. I know that I can just reboot the system and kudzu will add the tape drive back in during the boot process however I was wondering if it would be possible to manually run kudzu to add the drive or am I just "borrowing trouble" by trying to do this? TIA Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com

The following patches add RHEL 6 guest support to virt-v2v. This was actually quite a lot easier than I expected. * [PATCH 1/4] Update virt-v2v.conf for RHEL 6 virtio support * [PATCH 2/4] Check kudzu exists before attempting to disable it * [PATCH 3/4] Use dracut rather than mkinitrd if it's available * [PATCH 4/4] Properly convert RHEL 6 guest console

...ab looks like this... LABEL=/ / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/hda3 swap swap defaults 0 0 /dev/cdrom /mnt/cdrom iso9660 noauto,user,kudzu,ro 0 0 /dev/hdd4 /mnt/zip auto noauto,user,kudzu,rw 0 0 /dev/fd0 /mnt/floppy auto noauto,user,kudzu,rw 0 0 thrombin:/users/ /users nfs noauto,user,exec,dev,rw,hard,intr 0 0 #/dev/hdb1 /dosc ntfs ro,umask=000 0 0 /dev/hdb2 /dosd vfat ro,umask=000 0 0 tof:/export/home/ /tof nfs n...

...3 minutes to do the "checking for new hardware" stage. I initially thought that's because of a new release, so I did another reboot. That also took 2 minutes. OK, a minor issue (I don't reboot often) but... dunno if this is a UML issue or a linode specific issue, but 2 minutes in kudzu is a little odd! -- rgds Stephen

Hi, I have a wireless network but no wired network. I need to access the net for the necessary installation of the wireless drivers in CentOS 5.1. Could anyone let me know how i can go about it!! My card is Intel PRO/Wireless 3945 -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi! I've installed Centos 4.4 on a machine at work (it's a HP Proliant DL-320 G2 rackmout server that serves my desktop). In recent days (Centos 4.4 has only been installed for a little over a week), like, since Wed or Thu last week, every time I reboot Kudzu wants to remove the network adaptors then reinstall them and breaks the network. I've gone to the point of disabling one of the network ports in the BIOS (since I only use one of them anyway), and at first it worked when I rebooted, after doing the obligatory net configuration. Then the next...

...stall an HP Surestore dlt on a Centos 4 machine and I am at a loss as to how to proceed. Can someone either provide or point me to an online reference on how to proceed to add and configure a SCSI adapter and tape drive. I have read, but not really understood, the man page entry for st. Does kudzu handle this? Regards, Jim I am a digest subscriber so the favour of an additional direct reply is desired. -- *** e-mail is not a secure channel *** mailto:byrnejb.<token>@harte-lyne.ca James B. Byrne Harte & Lyne Limited vox: +1 905 561 1241 9 Brockle...

Me again. The ASUS P5N32-SLI motherboard in my new machine has dual NICs but CentOS has only detected one of them. I've tried rebooting with the network plugged in only to the second one, but kudzu still doesn't find it. Any suggestions?