asterisk users - Sep 2013 - dahdi configuration issue

Hello List,

I have configure 2 sangoma card each with 8 PRI lines with dahdi 2.6

the problem is i can see all channels configured in dahdi_cfg 480 channels
configured but
when I see /dev/dahdi i can only see 240 channels.

what could be problem I am using it wanrouter and when I put PRI in new
card i only got calls on new line that means one of the card is inactive at
same time all the lines and alarms are okay only suspected thing is
/dev/dahdi.

is there nany setting in linux or kernel level which need to be set for
solve this issue.

any help appreciated.

Thanking You

--Dhaval
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20130904/503cdebf/attachment.htm>

Did you open a ticket at Sangoma-Site?
What wanpipe driver version do you use?
Is it a production machine? Or can you test it in that way, that you 
crossover lines from one card to the other?

Am 04.09.2013 10:48, schrieb DHAVAL INDRODIYA:
> Hello List,
>
> I have configure 2 sangoma card each with 8 PRI lines with dahdi 2.6
>
> the problem is i can see all channels configured in dahdi_cfg 480 
> channels configured but
> when I see /dev/dahdi i can only see 240 channels.
>
> what could be problem I am using it wanrouter and when I put PRI in 
> new card i only got calls on new line that means one of the card is 
> inactive at same time all the lines and alarms are okay only suspected 
> thing is /dev/dahdi.
>
> is there nany setting in linux or kernel level which need to be set 
> for solve this issue.
>
> any help appreciated.
>
> Thanking You
>
> --Dhaval