Hi, I have a problem with Cisco 7906G and SIP protocol use with Asterisk 1.2.26. I have uploaded in my tftp server the firmware 'cmterm-7911_7906-sip.8-0-4SR1' that use 'SIP11.8-0-4SR1S.loads' and in SEPmacaddress.cnf.xml I have: <loadInformation>SIP11.8-0-4SR1S</loadInformation> ..but in tftp log server I have: Oct 07 11:56:22 asterisk1.local atftpd[6230.-1208161360]: Serving CTLSEPmacaddress.tlv to 192.168.0.155:49152 Oct 07 11:56:22 asterisk1.local atftpd[6230.-1208161360]: Serving SEPmacaddress.cnf.xml to 192.168.0.155:49153 ..and in asterisk CLI I have: -- Starting Skinny session from 192.168.0.155 Device SEPmacaddress is attempting to register Now when 7906G started is loaded: load file: sccp11.8-3-2s boot load id: tnp06.3-0-1-31.bin ..why isn't loaded sip firmware ?? Thanks in advance. ------ Salvatore.
Are you sure you have set the 7960 to SIP? By default they use SCCP, so you need to go through the process of changing them over, which ideally would just be done with the edits you have already in the load files but generally means going back to an early version of the SIP code then working upwards from there. You can check the current hardware in the status, if its SIP it will be something like POS-0806... (I haven't got a phone handy to check) but there is a reasonable amount of info on voipinfo about the process Cheers Duncan Sasa wrote:> Hi, I have a problem with Cisco 7906G and SIP protocol use with Asterisk > 1.2.26. > I have uploaded in my tftp server the firmware > 'cmterm-7911_7906-sip.8-0-4SR1' that use 'SIP11.8-0-4SR1S.loads' and in > SEPmacaddress.cnf.xml I have: > > <loadInformation>SIP11.8-0-4SR1S</loadInformation> > > ..but in tftp log server I have: > > Oct 07 11:56:22 asterisk1.local atftpd[6230.-1208161360]: Serving > CTLSEPmacaddress.tlv to 192.168.0.155:49152 > Oct 07 11:56:22 asterisk1.local atftpd[6230.-1208161360]: Serving > SEPmacaddress.cnf.xml to 192.168.0.155:49153 > > ..and in asterisk CLI I have: > > -- Starting Skinny session from 192.168.0.155 > Device SEPmacaddress is attempting to register > > Now when 7906G started is loaded: > > load file: sccp11.8-3-2s > boot load id: tnp06.3-0-1-31.bin > > ..why isn't loaded sip firmware ?? > Thanks in advance. > > ------ > > Salvatore. > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
Hi, if possible use 7906G without callmanager software but only with SIP protocol support ? Thanks. ------ Salvatore. ----- Original Message ----- From: "Stefan Gofferje" <list-asterisk-users at gofferje.homelinux.org> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com> Sent: Thursday, October 09, 2008 1:27 PM Subject: Re: [asterisk-users] Cisco 7906g & SIP> Sasa schrieb: >>> I need other files other than those obtained with >>> cmterm-7911_7906-sip.8-0-4sr1.cop ?? > > cmterm is the callmanager software. You need to get the non-callmanager > SIP-software. Contact your local Cisco representative to buy a license > for that. > > Terve, > Stefan > > -- > Last words of a stormchaser: > "Where is that rotation on the radar?!" > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >