bilal ghayyad
2011-Jun-25 12:39 UTC
[asterisk-users] Cisco IP Phones and Skinny in asterisk 1.8.4.2 "tooooooooooooooooo"
Hi All; Again, the Cisco IP Phones 7942G and using Skinny: I upgraded the firmware to version 8.5 (skinny) and I am using skinny channel (chan_skinny) and the skinny.conf file. The phones are registering, but when we use them to place a call, we only hear tooooooooooo in the handset and we do not hear voice (even when we dial the digits, we only hear toooooooo .. but it dials and destination answer). Also if we call to these phones, and we pickup handset of the 7942G, I am hearing toooooooooo and no voice (no one hear voice .. source and destination are not hear). What about be? Is it related to skinny channel that does not work? In that case, skinny channel is not working fine and that means, I have to use SIP ! Did any one face like this problem? Another problem, if I did changes in the extensions.conf and I need to reload, then I can not reload only the extensions.conf, I have to do reload and that will cause a reset for the Phones. Any advise? Did anyone tried skinny and faced those problems? Regards Bilal ----------------> wow I think someone needs to just spend some time reading > and playing. Getting these phones working is not rocket > science and there are similarities with how to do firmware / > config pushes. > > Not to sound mean but RTFM > > Sent from my iPhone > > On Jun 21, 2011, at 7:45 PM, Warren Selby <wcselby at selbytech.com> > wrote: > > > On Tue, Jun 21, 2011 at 5:35 PM, bilal ghayyad <bilmar_gh at yahoo.com> > wrote: > > Dear Warren; > > > > Please, keep all discussions to the list.? > There's no need to email me personally about this. > > > > <snip> > >? > > cmterm-7942_7962-sip.9-2-1.cop.sgn (which is written > that it is SIP IP Phone load) and > cmterm-7942_7962-sip.9-2-1.zip which is written that it is > SIP IP Phone firmware files only. So what is the difference > between them "the load and the firmware"? > > > > The .sgn file is basically just a zip container that > the Cisco Call Manager uses.? You'll want to grab the > zip file, extract the contents of the file into your tftp > root directory.? The latest firmware that I've used was > 8.5.2, in which most everything I needed worked for > me.? I don't know specifics about the later versions of > Cisco's SIP releases. > >? > > Now, when I need to do the upgrade for the Phone, then > I have to determine in the xml files the needed firmware? > > > > You should have, at least with firmware 8.5.2, the > following files in your tftproot directory after unzipping > the zip file: > > > > apps41.8-5-2TH1-9.sbn > > cnu41.8-5-2TH1-9.sbn > > cvm41sip.8-5-2TH1-9.sbn > > dsp41.8-5-2TH1-9.sbn > > jar41sip.8-5-2TH1-9.sbn > > SIP41.8-5-2S.loads > > term41.default.loads > > term61.default.loads > > XMLDefault.cnf.xml > > SEP[_MAC-ADDR_].cnf.xml > > > > I provide samples of the last two files on the blog > post mentioned earlier.? The last file, that starts > with SEP, should contain the actual mac address of the phone > you are trying to provision.? So, for example, it would > be SEP0003C9DD5624.cnf.xml, if the mac address of your phone > was 0003.C9DD.5624.? The example files are pretty much > all you need, just go through them and change any location > specific variables (such as _USER_, _IPADDR_, or _PASSWD_) > to the proper values for your environment. > > > > Once you've got your tftp server setup properly with > all of the appropriate config files, plug your phone in and > follow the instructions at the bottom part of my blog post > that explain how to get the phone reflashed to the SIP image > and registered to your asterisk server. > > > > > > -- > > Thanks, > > --Warren Selby, dCAP > > http://www.SelbyTech.com
Alexandre Rodrigues
2012-Mar-22 17:28 UTC
[asterisk-users] Cisco IP Phones and Skinny in asterisk 1.8.4.2 "tooooooooooooooooo"
Hello, Facing the same problem with the following debug skinny log: -- Asked to indicate 'Stop tone' condition on channel Skinny/500 at duba-23 Received Alarm Message: 32: Name=SEP001XXXXX Load= SCCP11.8-3-4SR1S : Invalid SCCP message! : ID :83 Received Alarm Message: 32: Name=SEP001XXXXX Load= SCCP11.8-3-4SR1S : Invalid SCCP message! : ID :83 Did you solved the problem? Thanks in advance, Alex, 2011/6/25 bilal ghayyad <bilmar_gh at yahoo.com>:> Hi All; > > Again, the Cisco IP Phones 7942G and using Skinny: > > I upgraded the firmware to version 8.5 (skinny) and I am using skinny channel (chan_skinny) and the skinny.conf file. > > The phones are registering, but when we use them to place a call, we only hear tooooooooooo in the handset and we do not hear voice (even when we dial the digits, we only hear toooooooo .. but it dials and destination answer). > > Also if we call to these phones, and we pickup handset of the 7942G, I am hearing toooooooooo and no voice (no one hear voice .. source and destination are not hear). > > What about be? Is it related to skinny channel that does not work? > > In that case, skinny channel is not working fine and that means, I have to use SIP ! > > Did any one face like this problem? > > Another problem, if I did changes in the extensions.conf and I need to reload, then I can not reload only the extensions.conf, I have to do reload and that will cause a reset for the Phones. > > Any advise? Did anyone tried skinny and faced those problems? > > Regards > Bilal > > > ---------------- >> wow I think someone needs to just spend some time reading >> and playing. Getting these phones working is not rocket >> science and there are similarities with how to do firmware / >> config pushes. >> >> Not to sound mean but RTFM >> >> Sent from my iPhone >> >> On Jun 21, 2011, at 7:45 PM, Warren Selby <wcselby at selbytech.com> >> wrote: >> >> > On Tue, Jun 21, 2011 at 5:35 PM, bilal ghayyad <bilmar_gh at yahoo.com> >> wrote: >> > Dear Warren; >> > >> > Please, keep all discussions to the list. >> There's no need to email me personally about this. >> > >> > <snip> >> > >> > cmterm-7942_7962-sip.9-2-1.cop.sgn (which is written >> that it is SIP IP Phone load) and >> cmterm-7942_7962-sip.9-2-1.zip which is written that it is >> SIP IP Phone firmware files only. So what is the difference >> between them "the load and the firmware"? >> > >> > The .sgn file is basically just a zip container that >> the Cisco Call Manager uses.? You'll want to grab the >> zip file, extract the contents of the file into your tftp >> root directory.? The latest firmware that I've used was >> 8.5.2, in which most everything I needed worked for >> me.? I don't know specifics about the later versions of >> Cisco's SIP releases. >> > >> > Now, when I need to do the upgrade for the Phone, then >> I have to determine in the xml files the needed firmware? >> > >> > You should have, at least with firmware 8.5.2, the >> following files in your tftproot directory after unzipping >> the zip file: >> > >> > apps41.8-5-2TH1-9.sbn >> > cnu41.8-5-2TH1-9.sbn >> > cvm41sip.8-5-2TH1-9.sbn >> > dsp41.8-5-2TH1-9.sbn >> > jar41sip.8-5-2TH1-9.sbn >> > SIP41.8-5-2S.loads >> > term41.default.loads >> > term61.default.loads >> > XMLDefault.cnf.xml >> > SEP[_MAC-ADDR_].cnf.xml >> > >> > I provide samples of the last two files on the blog >> post mentioned earlier.? The last file, that starts >> with SEP, should contain the actual mac address of the phone >> you are trying to provision.? So, for example, it would >> be SEP0003C9DD5624.cnf.xml, if the mac address of your phone >> was 0003.C9DD.5624.? The example files are pretty much >> all you need, just go through them and change any location >> specific variables (such as _USER_, _IPADDR_, or _PASSWD_) >> to the proper values for your environment. >> > >> > Once you've got your tftp server setup properly with >> all of the appropriate config files, plug your phone in and >> follow the instructions at the bottom part of my blog post >> that explain how to get the phone reflashed to the SIP image >> and registered to your asterisk server. >> > >> > >> > -- >> > Thanks, >> > --Warren Selby, dCAP >> > http://www.SelbyTech.com > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > ? ? ? ? ? ? ? http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > ? http://lists.digium.com/mailman/listinfo/asterisk-users