asterisk users - Feb 2008 - Problems with setting up Zaptel

Hi all,
I've just got an OpenVox A400P card with 1 FXO and 1 FXS module and I am
just trying to get it working. But no luck as of yet.
In /etc/zaptel.conf I've set the following options:
fxsks=2
fxoks=1
loadzone=se
defaultzone=se
And in /etc/asterisk/zapata.conf I've not sure what to set exactly. For
example, under [trunkgroups] what to specify there?
Under [channels I set something like the following:
usecallerid=yes
cidsignalling=dtmf
cidstart=polarity
hanguponpolarityswitch=yes
signalling=fxs_ks
context=default
Any help would a be appreciated, many thanks!
Christian

On Thu, Feb 28, 2008 at 08:08:49PM +0100, Christian
wrote:
> Hi all,
> I've just got an OpenVox A400P card with 1 FXO and 1 FXS module and I
am just trying to get it working. But no luck as of yet.
> In /etc/zaptel.conf I've set the following options:
> fxsks=2
> fxoks=1
> loadzone=se
> defaultzone=se
> And in /etc/asterisk/zapata.conf I've not sure what to set exactly. For
example, under [trunkgroups] what to specify there?
> Under [channels I set something like the following:
> usecallerid=yes
> cidsignalling=dtmf
> cidstart=polarity
> hanguponpolarityswitch=yes
> signalling=fxs_ks
> context=default
Do you actually notice any problem?
What is the output of:

  cat /proc/zaptel/*
  asterisk -rx 'zap show channels'

You also seem to be missing some 'channel =>' lines in your
zapata.conf .

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir