Displaying 20 results from an estimated 112 matches for "cidstart".
2004 Dec 11
1
Problem with TDM400P and cidstart=polarity
I'm testing a TDM400P with FXO module to receive incoming calls from an
analogue line and send it to a SIP device.
To recieve callerid, I need to use cidsignalling=dtmf and cidstart=polarity.
The problem is that when a call is finished, the TDM400P seems to require
about 20 seconds to prepare for the next incoming call. If a new call comes
in within 20 seconds after the previous call was hungup, the TDM400P answers
with a modem carrier, sounding like you're calling a mo...
2007 Aug 02
1
asterisk1.2 to 1.4 g711a fax
hi,
i have problem with pass-through faxing
with this scenario
hylafax(iaxmodem) - iax - asterisk1 1.2.22 - sip - asterisk2 1.2.X(xen
virtual) - linksys ATA
i can fax to fax2mail on hylafax
but after upgrade asterisk2 to 1.4 faxing is not working
hylafax(iaxmodem) - iax - asterisk1 1.2.22 - sip - asterisk2 1.4.X(xen
virtual) - linksys ATA
configuration is same
do you hava any idea what is
2004 Sep 27
1
Dutch (DTMF) caller-ID
...P's with 4 FXS-modules each and 2
HFC-PCI ISDN-cards (zaphfc-driver) in it. The analog line I'm
trying to get caller-ID working on is obviously on the X100P.
Here's the relevant configuration:
context=<context>
signalling=fxs_ks
immediate=yes
usecallerid=yes
cidsignalling=dtmf
cidstart=ring
hidecallerid=no
callerid=asreceived
callwaiting=no
callwaitingcallerid=no
group=1
callgroup=1
pickupgroup=1
adsi=no
channel => 7
I've tried "immediate=no", "cidstart=polarity", as well as waiting for
5 secs in the dial-plan before doing anything with the call, but...
2010 Mar 20
1
how to start callerid for india
...of caller ID
; ? ? ring ? ? ? ?= a ring signals the start (default)
; ? ? polarity ? ?= polarity reversal signals the start
; ? ? polarity_IN = polarity reversal signals the start, for India,
; ? ? ? ? ? ? ? ? ? for dtmf dialtone detection; using DTMF.
; ? ? ? ? ? ? ? ? ? (see doc/India-CID.txt)
;
;cidstart=polarity
so i edited chan_dahdi.conf ?according to my region.
###############################################################################################################
vi chan_dahdi.conf
;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
;autogenrated on 2010-03-18
;Dahdi Channels...
2004 Sep 29
0
Ang: Re: Dutch (DTMF) caller-ID
...ame situation here in Sweden, but I just got the X100 card and don t get it to work with DTMF caller ID.
Is the only way to solve this to buy a TDM400 card w FXO modules?
Is it just a driver question or a HW issue with the X100 card?
Where to find dok about the new keywords in conf files like "cidstart=polarity" in zapata.conf?
rgds
Gunnar
>>> traveler@xs4all.nl 2004-09-29 01:02:06 >>>
Hey all,
Following up on my own mail to let you know that I've installed
the FXO-module and got rid of the X100P. After some initial problems
with the hardware-configuration (older...
2009 Dec 30
2
CID not working.
...S_SV=allowed_not_screened") in new stack
*My chan_dahdi.conf file is as like this.*
vim /etc/asterisk/chan_dahdi.conf
[channels]
language=en
hanguponpolarityswitch=yes
answeronpolarityswitch=yes
busydetect=yes
busycount=3
callprogress=yes
callerid=asreceived
immediate=yes
cidsignalling=dtmf
cidstart=polarity
;cidstart=ring
useincomingcalleridonzaptransfer=yes
;cidsignalling=bell
; include dahdi extensions defined in FreePBX
#include chan_dahdi_additional.conf
; XTDM20B Port #1,2 plugged into PSTN
;AMPLABEL:Channel %c - Button %n
Please help me for fixing this issue. I am from India.
Regard...
2012 Jun 03
2
Caller ID : FSK ETSI or FSK US
...ne is best supported
by asterisk: is it FSK ETSI or FSK US?
I bought some caller ID converter hardware (convert DTMF to FSK and vice
versa) but still asterisk can not detect it.
The converter has a switch FSK ETSI or FSK US
This is what I put in /etc/asterisk/chan_dahdi.conf
...
cidsignalling=bell
cidstart=ring
...
If after buying this converter hardware and upgrade to dahdi 2.6.1 still
not solve my caller id problem, I really dont know what to do and feel
hopeless :(
Thanks,
Anam.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/...
2005 Aug 30
1
X100P and UK CallerID
...terisk/patches.html applied.
The Zap interface itself seems to work fairly well - although it's a
little quiet, there is no echo. Unfortunately, there's also no
CallerID.
My zapata.conf is as follows:
[channels]
context=default
busydetect=yes
busycount=5
usecallerid=yes
cidsignalling=v23
cidstart=usehist
callerid=asreceived
echotraining=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=8.0
txgain=1.0
signalling=fxs_ks
channel=1
My BT line definitely has caller id enabled, as my panasonic DECT
phones display it, if plugged directly into the POTS line.
Any idea what I'm doing wrong?...
2010 Apr 30
0
Caller ID on Asterisk and Astribank
...ed AGI Script /var/apps/core/runagi
-- Playing 'en/0006' (escape_digits=) (sample_offset 0)
I read instructions from a few forums....
then I made a change on 'chan_dahdi.conf' like :
-------------------------------------------------------------------------
1:
cidsignalling=v23, cidstart=ring, hidecallerid=no, callerid=asreceived
Here's the log :
-- Starting simple switch on 'DAHDI/15-1'
[Apr 30 11:42:03] NOTICE[31296]: chan_dahdi.c:8672 ss_thread: Got event 18 (Ring Begin)...
[Apr 30 11:42:03] NOTICE[31296]: chan_dahdi.c:8672 ss_thread: Got event 2 (Ring/Answered...
2011 Jan 24
2
Outgoing FXO calls have no audio with callprogress=no
...e audio returns. My chan_dahdi.conf file is
listed below. Can anyone point-out why callprogress=no isn't working?
#cat /tmp/a
[trunkgroups]
[channels]
language=en
context=incoming
toneduration=40
;usedistinctiveringdetection=yes
answeronpolarityswitch=yes
usecallerid=yes
cidsignalling=bell
cidstart=ring
;hidecallerid=yes
;hidecalleridname=yes
;waitfordialtone=yes
;mwimonitor=no
;mwilevel=512
;mwimonitornotify=/usr/local/bin/dahdinotify.sh
;mwisendtype=rpas,lrev
callwaiting=yes
;restrictcid=no
usecallingpres=yes
sendcalleridafter = 1
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
can...
2006 Apr 26
1
Problem with a TDM-400P
...4, or 128, tweak to your needs.
echocancelwhenbridged=yes
echotraining=400 ; Asterisk trains to the beginning of the call, number
is in milliseconds
mailbox=1000@home
group=1
context=outgoing ; Points to the default context of your extensions.conf
channel => 1
usecallerid=no
;cidsignalling=bell
;cidstart=ring
;hidecallerid=no
callwaiting=yes
; The FXO port, or the "line" port
signalling=fxs_ks
group=2
;rxwink=300 ; Atlas seems to use long (250ms) winks
;hanguponpolarityswitch ; doesn't work on ADSL lines
busydetect=yes
busycount=3
context=incoming-pstn
channel=> 4 ;...
2005 Jan 27
1
TDM-400P + CallerID
...the FXS'
point of view. My phone just shows 'external call', instead of a number.
How do I make * forward the callerid from the incoming call to my phone?
--Pieter
My zapata.conf:
context=buitenlijn
signalling=fxs_ks
immediate=yes
usecallerid=yes
cidsignalling=dtmf
cidstart=polarity
hidecallerid=no
callerid=asreceived
callwaiting=no
callwaitingcallerid=no
adsi=no
channel => 4
signalling=fxo_ks
language=nl
usedistinctiveringdetection=no
busydetect=yes
echocancel=yes
echotraining=no
channel => 1
channel => 2
My extensions.conf:
[buitenl...
2004 Sep 28
7
UK (British Telecom) Caller ID again
I've followed the recent thread on caller id with UK British Telecom
networks (where the caller id data is delivered before the first ring).
My understanding is that if I use a recent CVS head (e.g.
CVS-HEAD-09/18/04-17:45:52) and a TDM400 with FXO modules, all I need to
do is include the line:
usecallerid=uk
In my zapata.conf (in the [channels] section)
I've done this, but I get:
Sep
2005 Jun 06
5
IRQ Problems
..._dchannel: PRI Error: We think we're the CPE, but
they think they're the CPE too.
---zaptel.conf
defaultzone=us
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone=us
-- zapata.conf (relevant portions)
signalling = pri_cpe
switchtype = national
group = 2
context = fxoout
cidsignalling = dtmf
cidstart = polarity
channel => 1-23
-- proc/interrupts
CPU0
0: 6334299 IO-APIC-edge timer
1: 14390 IO-APIC-edge keyboard
2: 0 XT-PIC cascade
8: 3 IO-APIC-edge rtc
14: 2 IO-APIC-edge ide0
15: 505440 IO-APIC-edge ide...
2009 Jul 03
0
DAHDI CDR problem
...anceler: mg2) (Slaves: 01)
1 channels to configure.
Setting echocan for channel 1 to mg2
<<chan_dahdi.conf>>
[trunkgroups]
[channels]
language=en
resetinterval=3600
inbanddisconnect=yes
priindication=outofband
signalling=fxo_ks
usecallerid=yes
cidsignalling=bell
cidstart=polarity
usedistinctiveringdetection=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
;callerid=Mickey Mouse <2564286000>
;cid_n...
2005 Aug 19
4
Overriding Caller ID
...eems
to work. Below are snippets of some of our configs:
extensions.conf
;
; Local calls
;
exten => _NXXNXXXXXX,1,CallingPres(32)
exten => _NXXNXXXXXX,2,SetCallerID(2125551234)
exten => _NXXNXXXXXX,3,Dial(${TRUNK_LO}/${EXTEN})
zapata.conf
[channels]
usecallerid=yes
cidsignalling=bell
cidstart=ring
hidecallerid=no
restrictcid=no
usecallingpres=yes
callerid=asreceived
switchtype = dms100
signalling = em_w
group = 1
context=inbound
callerid=asreceived
channel => 1-24
Does anyone have any suggestions?
Thanks,
Waldo
2006 Oct 31
1
Asterisk does not bridge zap channels on outgoing calls
...l=>44
callerid=Clopotel 65
channel=>45
callerid=Clopotel 66
channel=>46
callerid=Clopotel 67
channel=>47
callerid=Clopotel 68
channel=>48
;------------------------------
context=cap_hunting
;------------------------------
group=4
callgroup=4
callerid=asreceived
cidsignalling=v23
cidstart=ring
transfer=yes
threewaycalling=yes
immediate=no
useincomingcalleridonzaptransfer=yes
;echocancelwhenbriged=yes
;musiconhold=guitar
sendcalleridafter=2
rxgain=10.2
txgain=1.8
signalling=fxs_ks
channel=>17
;------------------------------
context=omegasoft
;------------------------------
grou...
2013 Oct 05
2
loop-start and ground-start
...xplain loop-start and ground-start for me? What are they used for?
Next, I have the following configurations:
dahdi-channels.conf :
context=pstn-channels
signalling=fxs_ks
channel=>130
context=phone-channels
signalling=fxo_ks
channel=>127
chan_dahdi.conf :
[channels]
cidsignalling=dtmf
cidstart=dtmf
signalling=fxo_ls
pulsedial=no
usecallerid=yes
context=pstn-channels
channel=>130
signalling=fxs_ls
context=phone-channels
channel=>127
extensions.conf :
[pstn-channels]
exten=>_.,1,Dial(DAHDI/127/${EXTEN})
[phone-channels]
exten=>_.,1,Dial(DAHDI/130/${EXTEN})
/dahdi/system.c...
2010 Jan 05
5
CallerID on Indian PSTN is not working.
...ot;" <>") in new stack
My zapata.conf is like this
[channels]
language=en
hanguponpolarityswitch=yes
answeronpolarityswitch=yes
busydetect=yes
busycount=3
callprogress=yes
callerid=asreceived
hidecallerid=no
immediate=yes
cidsignalling=dtmf
;cidsignalling=bell
;cidsignalling=v23
;cidstart=polarity
cidstart=polarity_in
;cidstart=ring
useincomingcalleridonzaptransfer=yes
; include dahdi extensions defined in FreePBX
#include chan_dahdi_additional.conf
; XTDM20B Port #1,2 plugged into PSTN
;AMPLABEL:Channel %c - Button %n
context=from-pstn
signalling=fxs_ks
faxdetect=incoming
usecalle...
2007 Sep 15
2
Astribank and caller ID from PSTN
...When I receive calls on my ipphone I get always Unknown
callerid.
It's is possible to receive the callerid from the lines on the astribank
unit? This is my config:
[channels]
language=es
context=from-zaptel
signalling=fxs_ks
;rxwink=300
usecallerid=yes
callerid=asreceived
;cidsignalling=bell
;cidstart=ring
hidecallerid=no
callwaiting=yes
;usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
;callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
echotraining=800
relaxdtmf=yes
rxgain=3.0
txgain=3.0
callgroup=1
pickupgroup=1
;...