Displaying 20 results from an estimated 274 matches for "trunkgroups".
2004 Jul 07
0
GR-303 configuration options?
Can anyone describe the asterisk implementation of this any better than the
sample config files do?
from zapata.conf
; Trunk groups are used for NFAS or GR-303 connections.
;
; Group: Defines a trunk group.
; group => <trunkgroup>,<dchannel>[,<backup1>...]
;
; trunkgroup is the numerical trunk group to create
; dchannel is the zap channel which will
2005 Jun 10
2
Toll Free DIDs
I have several toll free numbers that get forwarded to a single local
number assigned to a trunkgroup. I've asked the telco to not forward
those toll free numbers but to assign them as DIDs to the trunkgroup, so
that I can differentiate via DNID.
They said that they can't do that. That toll free numbers must forward.
I know that I could have them each forward to different local DIDs
2009 Dec 28
2
Multiple Digium cards with one NFAS trunkgroup
...adzone=us
defaultzone=us
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
span=2,1,0,esf,b8zs
bchan=25-47
dchan=48
span=3,1,0,esf,b8zs
bchan=49-72
#dchan=72
span=4,1,0,esf,b8zs
bchan=73-96
#dchan=96
span=5,1,0,esf,b8zs
bchan=97-120
#dchan=120
span=6,1,0,esf,b8zs
bchan=121-144
#dchan=144
zapata.conf
[trunkgroups]
trunkgroup => 1,24,48
spanmap => 1,1,0
spanmap => 2,1,1
spanmap => 3,1,2
spanmap => 4,1,3
spanmap => 5,1,6
spanmap => 6,1,7
[channels]
switchtype=4ess
signalling=pri_cpe
context=trunkinbound
group = 0
channel => 1-23
channel => 25-47
channel => 49-144
;,25-47,49-144...
2009 Jan 02
0
Audiocodes MP-11X configuration to work with Asterisk
Sir,
Here is the working Audiocodes MP-11X FXO configurations to work with
Asterisk.
;**************
;** Ini File **
;**************
;Board: MP-118 FXO
;Serial Number: 905371
;Slot Number: 1
;Software Version: 5.00A.024
;DSP Software Version: 204IM => 209.13
;Board IP Address: 192.168.0.195
;Board Subnet Mask: 255.255.255.0
;Board Default Gateway: 192.168.0.1
;Ram size: 32M Flash size:
2005 Oct 10
2
Asterisk and Mitel SX 200 Slip and Frame Errors causing Major Ala rms
...<framing>,coding>
# timing values can be
# 0 - not used as timing source
# 1 - primary timing source
# 2 - Secondary timing source
span=1,1,0,d4,ami
e&m=1-24
===================================
# cat /etc/asterisk/zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
;
; Trunk groups are used for NFAS or GR-303 connections.
;
; Group: Defines a trunk group.
; group => <trunkgroup>,<dchannel>[,<backup1>...]
;
; trunkgroup is the numerical trunk group to create
; dchannel is the zap channel which will have the
;...
2004 Sep 24
0
Two questions for Asterisk setup (Definity G3R and NFAS Trunk Gro ups)
Hi,
I'm a lab manager / supervisor at our labs. We've had Asterisk in
use for over a year directly hooked to the PSTN - a no brainer for
configuration (although I had to fix some AT&T specific things in libpri).
Right now I have two big challenges. One is to hook our box up lineside to
a Lucent Definity G3R. Avaya is chasing this from their end, but we had the
highest level of
2006 May 12
1
TE110P on E1
...en try to, but so far it wasn't much of a success.
It only works more or less in EuroISDN as PRI CPE.
And even that config gives me some trouble with channel negotiation.
My current config:
*zaptel.conf:*
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
loadzone=be
defaultzone=be
*zapata.conf:*
[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1,1
[channels]
context=incoming-pri
switchtype=euroisdn
pridialplan=national
prilocaldialplan=national
signalling=pri_cpe
group=1
channels => 1-15,17-31
I have tried EuroISDN and QSIG in both NET and CPE, without much success.
>From traces of D-channel...
2006 Jan 05
3
TE110p and pri_cpe signalling not recognized
...an 5 21:43:33 WARNING[6808]: loader.c:414 __load_resource:
chan_zap.so: load_module failed, returning -1
My config is here below.
TIA
Arnar Gestsson
/etc/zaptel.conf
span=1,1,0,ccs,hdb3,crc4
loadzone = nl
loadzone=de
defaultzone=nl
bchan=1-5,7-15,17-31
dchan=16
/etc/asterisk/zapata.conf
[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1
[channels]
language=en
context=default
switchtype=euroisdn
pridialplan=unknown
signalling=pri_cpe
;rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
call...
2011 Mar 18
2
Problem routing call to fax machine on DAHDI FXS port
...se(CALLERID is ${CALLERID(num)})
exten => s,n,Verbose(Time is ${STRFTIME(${EPOCH},,%Y%m%d-%H%M%S)})
exten => s,n,Answer
exten => s,n,Ringing
exten => s,n,Wait(6)
exten => s,n,Dial(SIP/1000)
exten => s,n,Voicemail(1000,u)
exten => s,n,Hangup
My chan_dahdi.conf file looks like:
[trunkgroups]
;trunkgroup => 1,1
;trunkgroup => 2,2
;trunkgroup => 3,3
;trunkgroup => 4,4
;spanmap => 1,1
;spanmap => 2,2
;spanmap => 3,3
;spanmap => 4,4
[channels]
language=en
context=incoming
toneduration=40
;usedistinctiveringdetection=yes
answeronpolarityswitch=no
usecallerid=yes
c...
2005 Aug 01
0
Issue with zapata.conf "immediate" setting
I currently have two channel groups in my zapata.conf file. I would like
one group to be immediate=yes and the other immediate=no
Does not seem to matter which way I go, the first entry in overrides my
explicit setting for the second group. I am running * 1.0.9 on FC1
[trunkgroups]
;trunkgroup => 1,24
trunkgroup => 1,48,72
;spanmap => 1,1,0
spanmap => 2,1,0
spanmap => 3,1,1
spanmap => 4,1,2
[channels]
; Tie line to Nortel
context=tie_line_01
signalling=em_w
rxwink=300
usecallerid=yes
hidecallerid=no
usecallingpres=yes
rxgain=0
txgain=0
overla...
2003 Dec 18
1
Different Dial tones for internal and external.
On systems even key systems it is customary to have an 'internal' dial
tone.
Since Asterisk simply ignores the 9 and keeps the tone going it is hard
to tell for some 'new users' if they can make a call.
My first idea was to change the generated dial tone via source. Then if
the user presses 9 go to a different context where I would record about
30 seconds of the normal dial
2005 Feb 10
0
Asterisk 1.0.5 won't pick up incoming calls
...installation (I made
no modifications to the original files).
Any help is much appreciated!
zaptel.conf:
-----------------------------------------------------
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
;
; Trunk groups are used for NFAS or GR-303
connections.
;
; Group: Defines a trunk group.
; group =>
<trunkgroup>,<dchannel>[,<backup1>...]
;
; trunkgroup is the numerical trunk group to
create
; dchannel is the zap channel which will
have the
;...
2011 Jan 24
2
Outgoing FXO calls have no audio with callprogress=no
My outgoing FXO calls are answered but have no audio in either direction
if I have callprogress=no in chan_dahdi.conf. If I change to
callprogress=yes then the audio returns. My chan_dahdi.conf file is
listed below. Can anyone point-out why callprogress=no isn't working?
#cat /tmp/a
[trunkgroups]
[channels]
language=en
context=incoming
toneduration=40
;usedistinctiveringdetection=yes
answeronpolarityswitch=yes
usecallerid=yes
cidsignalling=bell
cidstart=ring
;hidecallerid=yes
;hidecalleridname=yes
;waitfordialtone=yes
;mwimonitor=no
;mwilevel=512
;mwimonitornotify=/usr/local/bin/dahdinoti...
2011 Mar 21
0
Problem routing call to fax machine on DAHDI FXSport
...se(CALLERID is ${CALLERID(num)})
exten => s,n,Verbose(Time is ${STRFTIME(${EPOCH},,%Y%m%d-%H%M%S)})
exten => s,n,Answer
exten => s,n,Ringing
exten => s,n,Wait(6)
exten => s,n,Dial(SIP/1000)
exten => s,n,Voicemail(1000,u)
exten => s,n,Hangup
My chan_dahdi.conf file looks like:
[trunkgroups]
;trunkgroup => 1,1
;trunkgroup => 2,2
;trunkgroup => 3,3
;trunkgroup => 4,4
;spanmap => 1,1
;spanmap => 2,2
;spanmap => 3,3
;spanmap => 4,4
[channels]
language=en
context=incoming
toneduration=40
;usedistinctiveringdetection=yes
answeronpolarityswitch=no
usecallerid=yes
c...
2007 Jan 19
1
Integrating asterisk with Toshiba Astrata DK380
...ns to the beginning of the call, number is
in milliseconds
callerid=asreceived
overlapdial=no
pridialplan=unknown
immediate=no
;rxwink=300
callprogress=no
loadzone=au
context=from-pstn ; Points to the default context of your extensions.conf
group=2
channel=>1-15
channel=>17-31 ;PRI/E1 link
[trunkgroups]
trunkgroup=>2,16
spanmap=1,2,1
*/etc/asterisk/extension.conf*
[from-zaptel]
exten => _X.,1,Set(DID=${EXTEN})
exten => _X.,n,Goto(s,1)
exten => s,1,NoOp(Entering from-zaptel with DID == ${DID})
; If ($did == "") { $did = "s"; }
exten => s,n,Set(DID=${IF($["...
2009 Jul 28
1
chan_dahdi.conf parser question
...pt because a small change
gives an unexpected result. Can someone help me understand the
chan_dahdi.conf parser that would explain this?
Based on the config below, Channels 1-23 are assigned to the context
inbound-pri, and Channels 25-47 are assigned to the context outbound-pri. As
expected.
[trunkgroups]
; We do not do NFAS at this time
[channels]
echocancel = yes
switchtype = national
context = outbound-pri
signalling = pri_net
group = 2
channel => 25-47
context = inbound-pri
signalling = pri_cpe
group = 1
channel => 1-23
HOWEVER when I simply reverse the order of the channels on the l...
2004 Jun 18
5
Problems with X100P
All,
I'm having trouble getting the X100P working.
Lsmod shows :
zaptel 179808 0
I did a .
# modprobe zaptel
and here is my zaptel.conf (comments omitted)
__SNIP__
fxsks=1
loadzone = us
defaultzone=us
__SNIP__
Here is zapata.conf
__SNIP__
[trunkgroups]
[channels]
context=default
switchtype=national
signalling=fxo_ls
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
group=1
callgroup=1
pic...
2005 Sep 12
2
Hang up not hanging up (New Zealand Indications??)
Hi there,
I have a new asterisk working in New Zeland and everything is working
well except when an incoming call to the PSTN hangs up, asterisk wont
hang up the zap trunk (X100P).
I have found this information:
http://bugs.digium.com/bug_view_page.php?bug_id=0001474
Which discusses my problem and i have made sure that i have the latest
info in the indications.conf as follows:
[general]
2004 Nov 21
3
TDM400 FXO stops handling outgoing calls, but still accepts incoming?
...http://sowerbutts.com
main(){char*s=">#=0> ^#X@#@^7=",c=0,m;for(;c<15;c++)for
(m=-1;m<7;putchar(m++/6&c%3/2?10:s[c]-31&1<<m?42:32));}
-------------- next part --------------
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
;
; Trunk groups are used for NFAS or GR-303 connections.
;
; Group: Defines a trunk group.
; group => <trunkgroup>,<dchannel>[,<backup1>...]
;
; trunkgroup is the numerical trunk group to create
; dchannel is the zap channel which will have the
;...
2009 Jun 18
2
dahdi and overlapdial problem
...ahdi channels. When set to "no" all audio is fine.
Basically we can choose between being able to receive calls or to place
calls :)
Details:
Software:
asterisk-1.6.1.0.tar.gz
libpri-1.4.9.tar.gz
dahdi-linux-2.1.0.4.tar.gz
dahdi-tools-2.1.0.2.tar.gz
wanpipe-3.4.1.tgz
chan_dadhi.conf:
[trunkgroups]
[channels]
context=from-pstn
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pi...