search for: fxoks

I have an Asterisk box running Fedora Core 4, Asterisk 1.4, Lippri, 1.4, and Zaptel 1.4 The Digium cards installed are TDM2400 and TE110P. Everything was working fine until I upgraded to zaptel 1.2.12 from 1.2.9 Now when I run ztcfg I get the following error message: (CAS signalling on span 2 conflicts with Clear channel on channel 40) --NOTE: signaling was spelled wrong in the error

...o Debian logo in FB) Digium Cards: T100P -->FXS X100P -->FXO o Asterisk version: Asterisk CVS-10/02/03-17:52:20 ------------------ asterisk:~# cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard T100P T1/PRI Card 0" B8ZS/ESF IRQ misses: 21904 1 WCT1/0/1 FXOKS (In use) 2 WCT1/0/2 FXOKS (In use) 3 WCT1/0/3 FXOKS (In use) 4 WCT1/0/4 FXOKS (In use) 5 WCT1/0/5 FXOKS (In use) 6 WCT1/0/6 FXOKS (In use) 7 WCT1/0/7 FXOKS (In use) 8 WCT1/0/8 FXOKS (In use) 9 WCT1/0/9 FXOKS (In use) 10 WCT1/0/10 FXOKS (In use) 11 WCT1/0/11 FXOKS (In use) 12 WCT1/0/12 FXOKS...

...on ========== span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 # Span 2: WCT1/1 "Digium Wildcard TE110P T1/E1 Card 1" # ============ Legacy PBX E1 connection ======= span=2,2,0,ccs,hdb3,crc4 bchan=32-46,48-62 dchan=47 # Span 3: WCTDM/0 "Wildcard TDM2400P Prototype Board 1" fxoks=63 fxoks=64 fxoks=65 fxoks=66 fxoks=67 fxoks=68 fxoks=69 fxoks=70 fxoks=71 fxoks=72 fxoks=73 fxoks=74 fxoks=75 fxoks=76 fxoks=77 fxoks=78 fxoks=79 fxoks=80 fxoks=81 fxoks=82 fxsks=83 fxsks=84 fxsks=85 fxsks=86 # Global data loadzone = us defaultzone = us Regards, vidura -- T...

...span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 # Span 2: WCT1/1 "Digium Wildcard TE110P T1/E1 Card 1" # ============ Legacy PBX E1 connection ======= span=2,2,0,ccs,hdb3,crc4 bchan=32-46,48-62 dchan=47 # Span 3: WCTDM/0 "Wildcard TDM2400P Prototype Board 1" fxoks=63 fxoks=64 fxoks=65 fxoks=66 fxoks=67 fxoks=68 fxoks=69 fxoks=70 fxoks=71 fxoks=72 fxoks=73 fxoks=74 fxoks=75 fxoks=76 fxoks=77 fxoks=78 fxoks=79 fxoks=80 fxoks=81 fxoks=82 fxsks=83 fxsks=84 fxsks=85 fxsks=86 # Global data loadzone = us defaultzone = us...

...4: XBUS-00/XPD-03 "Xorcom XPD #00/03: BRI_TE" (MASTER) AMI/CCS NOTOPEN 10 XPP_BRI_TE/00/03/0 Clear NOTOPEN 11 XPP_BRI_TE/00/03/1 Clear NOTOPEN 12 XPP_BRI_TE/00/03/2 HDLCFCS (In use) NOTOPEN Span 5: XBUS-00/XPD-10 "Xorcom XPD #00/10: FXS" NOTOPEN 13 XPP_FXS/00/10/0 FXOKS NOTOPEN 14 XPP_FXS/00/10/1 FXOKS NOTOPEN 15 XPP_FXS/00/10/2 FXOKS NOTOPEN 16 XPP_FXS/00/10/3 FXOKS NOTOPEN 17 XPP_FXS/00/10/4 FXOKS NOTOPEN 18 XPP_FXS/00/10/5 FXOKS NOTOPEN 19 XPP_FXS/00/10/6 FXOKS NOTOPEN 20 XPP_FXS/00/10/7 FXOKS NOTOPEN pbx1*CLI> dahdi show channels Chan...

...7-31 > dchan=16 > > # Span 2: WCT1/1 "Digium Wildcard TE110P T1/E1 Card 1" > # ============ Legacy PBX E1 connection ======= > > span=2,2,0,ccs,hdb3,crc4 > bchan=32-46,48-62 > dchan=47 > > # Span 3: WCTDM/0 "Wildcard TDM2400P Prototype Board 1" > fxoks=63 > fxoks=64 > fxoks=65 > fxoks=66 > fxoks=67 > fxoks=68 > fxoks=69 > fxoks=70 > fxoks=71 > fxoks=72 > fxoks=73 > fxoks=74 > fxoks=75 > fxoks=76 > fxoks=77 > fxoks=78 > fxoks=79 > fxoks=80 > fxoks=81 > fxoks=82 > fxsks=83 > fxsks=84 &g...

...edric >>>>>>>>>>>>>>>>>>>>>>>>> /etc/zaptel.conf # Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan= 16 # Span 2: WCTDM/0 "Wildcard TDM400P REV I Board 1" fxoks=32 fxoks=33 fxoks=34 fxoks=35 # Global data loadzone = fr defaultzone = fr >>>>>>>>>>>>>>>>>>>>>>>>> /etc/asterisk/zapata.conf [channels] language=fr context=fromE1 switchtype=euroisdn signalling=pri_cpe usecal...

...erface . . . --- Output of `lsmod` Module Size Used by wctdm 37184 4 . . . ----- Output of /proc/zaptel/1 [root at pbx ~]# cat /proc/zaptel/1 Span 1: WCTDM/0 "Wildcard TDM400P REV H Board 1" 1 WCTDM/0/0 FXSKS (In use) 2 WCTDM/0/1 FXOKS (In use) 3 WCTDM/0/2 FXOKS (In use) 4 WCTDM/0/3 FXOKS (In use) [root at pbx ~]# ---- Output of ztcfg -vvvv [root at pbx ~]# cat /proc/zaptel/1 Span 1: WCTDM/0 "Wildcard TDM400P REV H Board 1" 1 WCTDM/0/0 FXSKS (In use) 2 WCTDM/0/1 FXOKS (In u...

As best i could figure it out, I've installed dahdi and rc4. My TDM400P doesn't answer fxo or fxs. /etc/dahdi/system.conf: loadzone = us defaultzone=us fxoks=1,2 fxsks=4 /etc/asterisk/chan_dahdi.conf: [house-phones] context=internal ; Uses the [internal] context in extensions.conf signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel dahdichan => 1 ; Telephone attached to port 1 dahdichan => 2 ; Telephone att...

Hello I setup Asterisk@Home with purely VoIP and it worked fine. I then added an X100P card so I could call out / take inbound calls via PSTN and that went fine. But I have just added a TDM400P card (specifically a TDM30B) and now problems. Here is some of the output. Any ideas on what I should be looking at next? When I run genzaptelconf -s -d I get lots of erors on screen - bit I can

..., 1) there is no problem dialing and 2) if I use a station that's working properly to listen to the voicemail message, I hear a perfectly clear signal with just a hint of that same buzzing in the background. My zaptel.conf looks like this: span=1,1,0,d4,ami span=2,1,0,d4,ami span=3,1,4,d4,ami fxoks=1-16 fxoks=17-24 fxoks=25-48 fxoks=49-72 Can anyone tell me what I'm missing or what else I might try? Thanks in advance.

...uot; (MASTER) AMI/CCS > NOTOPEN >=20 > =09 10 XPP_BRI_TE/00/03/0 Clear NOTOPEN > =09 11 XPP_BRI_TE/00/03/1 Clear NOTOPEN > =09 12 XPP_BRI_TE/00/03/2 HDLCFCS (In use) NOTOPEN > Span 5: XBUS-00/XPD-10 "Xorcom XPD #00/10: FXS" NOTOPEN >=20 > =09 13 XPP_FXS/00/10/0 FXOKS NOTOPEN > =09 14 XPP_FXS/00/10/1 FXOKS NOTOPEN > =09 15 XPP_FXS/00/10/2 FXOKS NOTOPEN > =09 16 XPP_FXS/00/10/3 FXOKS NOTOPEN > =09 17 XPP_FXS/00/10/4 FXOKS NOTOPEN > =09 18 XPP_FXS/00/10/5 FXOKS NOTOPEN > =09 19 XPP_FXS/00/10/6 FXOKS NOTOPEN > =09 20 XPP_FXS/00/10/7 FXOK...

Two problems, possibly related: Here's the configuration...my Asterisk box has a TDM844B in it; port 1-4 are FXS, 5-8 FXOs. Here are the config files: /etc/zaptel.conf: -------- fxoks=1 fxoks=2 fxoks=3 fxoks=4 fxsks=5 fxsks=6 fxsks=7 fxsks=8 loadzone = us defaultzone = us -------- /etc/asterisk/zapata.conf: -------- [channels] language=en usecallerid=yes hidecallerid=no callwaiting=no threewaycalling=no transfer=no echocancel=yes echocancelwhenbridged=yes echotrainin...

...registeriax = no registersip = no trunkstyle = analog disallow = all allow = all gui_volume = 2 ; GUI metadata signalling = fxs_ks gui_fxooffset = 0 ; GUI metadata rxgain = 0 txgain = 0.0 channel = 1 /dahdi/system.conf # Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER) fxsks=1 fxoks=2 fxoks=3 fxoks=4 # Global data loadzone = in defaultzone = in indications.conf: -------------------- [general] country=in ; default location [in] description = India ringcadence = 400,200,400,2000 dial = 400*25 busy = 400/750,0/750 ring = 400*25/400,0/200,400*25/400,0/...

Hi, I have a analog phone connect to a WCTDM card. It used to work fine. Now recently, after several conf change and power restart, it stops working. Whenever I pickup the phone, instead of hearing the dial tone, I hear a busing beeping tone, like a machine gun is firing. :) However, from asterisk console, I do see a a OffHook/OnHook message, but whatever I dial in the phone keypad seems not

...d-0.3.0-PRE-1d built by root @ pbx on a i686 running Linux on 2006-01-05 13:25:25 UTC # cat /etc/zaptel.conf loadzone=be defaultzone=be span=1,1,3,ccs,ami bchan=1-2 dchan=3 span=2,1,3,ccs,ami bchan=4-5 dchan=6 span=3,1,3,ccs,ami bchan=7-8 dchan=9 span=4,1,3,ccs,ami bchan=10-11 dchan= 12 # TDM400P fxoks=13-16 # cat /proc/zaptel/5 Span 5: WCTDM/0 "Wildcard TDM400P REV I Board 1" 13 WCTDM/0/0 FXOKS (In use) 14 WCTDM/0/1 FXOKS (In use) 15 WCTDM/0/2 FXOKS (In use) 16 WCTDM/0/3 FXOKS (In use) Part of /etc/asterisk/zapata.conf: [channels] ; Default l...

I am setting up 2 nufone lines. I want to make them both availiable for dial-out. How do you syntax it in extensions.conf so that it figures out which one is avaliable and dials out on it. Also how do you setup the name part of callerid for the outgoing lines?

...;group= ;context=default ; Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" ;group=0,14 ;context=from-pstn ;switchtype = euroisdn ;signalling = pri_cpe ;channel => 94-108,110-124 ;group= ;context=default ; Span 5: WCTDM/0 "Wildcard TDM800P Board 1" ;;; line="125 WCTDM/0/0 FXOKS (In use)" signalling=fxo_ks callerid="Channel 125" <6125> mailbox=6125 group=5 context=from-internal channel => 125 callerid= mailbox= group= context=default ;;; line="126 WCTDM/0/1 FXOKS (In use)" signalling=fxo_ks callerid="Channel 126" <6126> ma...

...e problem comes from the TDM400, when i plug a tested working phone on it , i get no dialtone; the goal is to connect a few old non-ip phones to the PBX. The modules zaptel and wctdm compiled and are loaded successfully. Here are some infos : debian linux asterisk 1.0.5 cvs zaptel zaptel.conf fxoks=2 ; the x101 card uses channel 1 with fxsks=1 loadzone=fr default zone = fr when i do a ztcfg it succesfully says me "registered zone 2" But i cant see the phone in the zttool /etc/asterisk/zapata.conf [channels] language=fr context=default signalling=fxo_ks echocancel=yes group= 1 bus...

...ing=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 1 callerid= group= context=default ;;; line="2 WCTDM/4/1 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 2 callerid= group= context=default ;;; line="3 WCTDM/4/2 FXOKS (SWEC: MG2)" signalling=fxo_ks callerid="Channel 3" <4003> mailbox=4003 group=5 context=from-internal channel => 3 callerid= mailbox= group= context=default ;;; line="4 WCTDM/4/3 FXOKS (SWEC: MG2)" signalling=fxo_ks callerid="Channel 4" <4004> ma...