asterisk-users at rogg.is
2007-Nov-05 23:03 UTC
[asterisk-users] Two B410P cards in one machine
Hi. I have two B410P ISDN BRI cards in one machine running Asterisk on Ubuntu 7.04. One card connects to the PSTN network and is therefore in TE mode on all four ports and the other card is in NT mode and connects to a PBX. The Asterisk is used to remap features, callerid's and more from the PSTN to the PBX. 1) Is there any special care I need to take regarding the configuration for these cards when they're put together like this? Especially concerning timing between calls bridged from one card to the other (PSTN call comes in, Asterisk answers it and connects to a new call going out on another port to the PBX)? 2) Is there a way to make sure that this is all run on the PSTN timing source through the asterisk box and over to the PBX? 3) Even though the call quality through the Asterisk box is ok as far as I can hear, I'm experiencing tiny drops in the audio stream at regular intervals (around every two seconds or so). My guess was timing slip of some sort between the cards or something like this, but perhaps I'm missing something that really needs to be taken care with when using two cards like this in one machine? Perhaps all the same question with a different twist, but I'm just trying to get the hang of this config and I can't find detailed enough documentation for this scenario via usual sources. All information relating to the "correct" or proper configuration of multiple B410P cards in one machine is very much appreciated. tnx, Baldvin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071105/9306fd7a/attachment.htm