search for: card

I've been running Asterisk for months with no problems. I have grown to the point where I need an aditional TE cards. After many attempts I was able to add the second card without affecting the performance of the first. However, the second card is not working properly. Setup ===== - Running on a Dell Server. - RedHat 8 - Asterisk 1.0 - I have two TE410Ps on that box, card 0 assigned to IRQ 4 and card 1 assig...

I sent an email out to freebsd-net without a response, soo this is my last attempt at getting any assistance here. I have a QLE3142-CU-CK (rebranded NetXen NX3-20GCU w/ NX3031 chipset) with no driver support in *BSD from anything I saw. I came across solaris's ntxn driver which seems to work appropriately but I have no use for solaris as a host o/s. Naturally I'll attempt at trying to get

Dear Daniel, The thirty-party PCIe card is based on the Xilinx’ FPGA which is off the shelf, the main features are as follows: 1) x8 Gen3, 8Gb/s per lane/direction 2) MSI and legacy interrupt support 3) Scatter-gather packet DMA engine provide by Northwest Logic We hope multiple Linux Containers to access the PCIe card in time division m...

I have the following models: class Card < ActiveRecord::Base belongs_to :deck belongs_to :front, :polymorphic => true belongs_to :back, :polymorphic => true end class TextContent < ActiveRecord::Base has_one :card, :as => :front has_one :card, :as => :back end The conflicting...

Hello all, I was wondering if anybody knows where one might obtain a PCI ISDN card supporting a single BRI for use with Asterisk in Australia (and using something like chan_capi). Because of the Isdn4Linux DTMF issue, I don't want one of those cards. I've already spent too much time messing about with my current card. I'm after something like the AVM Fritz! cards. I...

Hi all, Is there any alternative hardware components for multi port FXO cards, other than Single and E1 or T1 level? For example 4 or 8 port FXO card is ideal. Also the price matters. Thanks!

Hello everyone. I've got a HFC ISDN card that I'm using with chan_misdn and it basically behaves like crap. Echo is waaay worst then echo I get TDM400 card, sound is "choppy" (there other side is allays complaining about sound interruptions) and to top it all it detects fake DTMF's all the time. Is this a chan_misdn...

Group Can I have 2 wildcard T1 cards in the same box? I was thinking the first card would have channels 1-24 and the second card would have 25-48 Does this sound correct?

Hi guys, I have encountered a strange error in one of my applications. The details are the following: The application is a very simple one, I have one model, Cards, it has some pretty basic stuff, some after_save methods for saving uploaded files to their places. I have an UI where I can manage the Card records, with the default methods, including ''edit'' cards_controller.rb: # def edit # logger.info "Loading Card with ID: #{params...

Hi, I've found that neither Michael Manousos patch nor ztdummy driver do not fix musiconhold sound interruption problem up to acceptable quality level. Sound is choppy here anyway. It is my understanding (please correct me if I'm wrong) that if I have a Digium card in my asterisk machine, these problems should be gone 'cause those cards provide some reliable timing. So I have no choice and wish to buy a cheapest Digium card just for timing. I have no PSTN ports, it's pure voip environment here. So my question is whether any Digium card would be ok or...

On Thu, May 28, 2015 10:46 am, Kirk Bocek wrote: > > > On 5/26/2015 11:07 AM, m.roth at 5-cent.us wrote: >> Push came to shove - these things gag on a drive > 2TB. > > I ran into this a couple of years ago with some older 3Ware cards. A > firmware update fixed it. > With 3ware cards depending on card model: 1. the card supports drives > 2TB 2. the card as initially released does not support these drives, but there is firmware update after installation of which the card will supports drives > 2TB 3. The card does...

Hi Is VGA passthrough with an nvidia optimus laptop remotely feasible? For those who don''t know, nvidia optimus is two hardware cards, connected to the same display. One sandy bridge setup (I use the intel driver for this), and one nvidia card. I have a laptop with this setup, and usually I''m using only the intel card. I then use acpi_call to power down the nvidia card. To use this optimus setup on linux I use bumblebe...

Hi there! we are thinking of deploying a IPSEC VPN concentrator using multiple PCI bus version VPN1401 cards in a FreeBSD box using hifn support.. From the technical specs in Soekris website http://www.soekris.com/vpn1401.htm, each card can support 24 to 70 connections. The question is if we put 3 VPN1401 cards in a single box, does this mean the FreeBSD box can support 3 x (24 to 70) IPSEC connection...

...on this problem before. Well here goes again. I have an intel mobo with a p4 2.4ghz proc, 1GB Ram. It has built-in ethernet and vga and 6 pci slots. I dreamed of making this my household communications server: internet router, firewall, vpn and asterisk. Everything works except the TDM fxs card. Well it works for a little while and it dies: no dialtone, no ring tone. All 6 slots are filled: two more Ethernet cards, two digium fxo cards, an sb live card and the tdm card. Everything that I don't use on the motherboard is turned off: serial and parallel ports, serial ata and motherbo...

Hello my brothers and sisters, Is "X100P" card suitable to VoIP? and if "yes", am i need to only "X100P" and "Asterisk" Package? or i need also to other cards or packages? and if "X100P" card not suitable to VoIP, please recommend a another card, (please take in your account that i would like to connect...

Hi. Please excuse me asking this again. But it really puzzles me. We're installing asterisk at a branch office at NJ (HQ is at Petach-Tikva) It'll need to support 5 POTS lines, 11 analog extensions and four VOIP phones. I wanted to go with a T1 card from digium and a channel bank, but we have a dead line. It has to be up and running by January 1st. I don't have the time to start shopping at ebay, where you don't know what you'll get, and you need to install, under time pressure something you not familiar with. So I thought of inst...

Hello, I've got a Junghanns ZapHFC E1 PRI Card (cwain) and this driver writes very much messages into /var/log/messages like the following: --- snip --- Aug 2 17:58:02 asterisk1 kernel: cwain: card 1 RX [ 0x2 0x1 0x1 0x37 0x90 0xc3 ] 6 bytes Aug 2 17:58:02 asterisk1 kernel: cwain: card 1 TX [ 0x2 0x1 0x1 0xef ] Aug 2 17:58:02 asterisk1 ker...

Hi all, I've been working with * for a long time now, but only with analog FXS/FXO systems. I am venturing towards setting up a box in Germany now and I believe that requires a Fritz card? Do I even have to use the Fritz cards? Why not a Digium card.... We have 2 ISDN lines ( --> 6 handsets) so I'm guessing that will require 2 Fritz PCI cards (they have 1 port only). Then there's some sort of channel bank that sends the calls out to the extensions. Does this make an...

Good morning, I installed on xen a windows XP and a Windows 2003 domU. Windows operating system does not know the real network card but it setup up an AMD pcnet card 10mbps. Is it possible to setup a full virtualized domU with a real network card ? I installed also windows on a trial xen enterprise and real network card seeems to work fine. What differences between xen and xen entrprise as far as network card is concerned...

Thank you all for the voicemail cards you sent. If you have the following in PDF or laying around (scan): * AT&T/Cingular flow voicemail card * Verizon flow voicemail card * Sprint flow voicemail card * TMobile flow voicemail card * Alltel flow voicemail card * Avaya Nortel Octel flow voicemail card * Comedian Mail (Asterisk) --...