asterisk users - Nov 2007 - Please explain the correct LED color for B410P

Hi.

 

I have installed B410P in Europe and the cards works more or less ok. My
question is what color should the LED's on the back of the card be when
connected to the PSTN NT box? Is there anywhere some information on the
expected LED color in any given state (idle, call active, cord unplugged
etc.)?

 

On my card the lights are shining Red(orange-ish) but flashing to green
every now and then and then shining green when there is a call on one of the
lines for that port.

 

tnx,

Baldvin

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20071105/fd39bb60/attachment.htm

asterisk-users at rogg.is wrote:
> Hi.
> 
>  
> 
> I have installed B410P in Europe and the cards works more or less ok. My
> question is what color should the LED's on the back of the card be when
> connected to the PSTN NT box? Is there anywhere some information on the
> expected LED color in any given state (idle, call active, cord unplugged
> etc.)?
> 
>  
> 
> On my card the lights are shining Red(orange-ish) but flashing to green
> every now and then and then shining green when there is a call on one of
the
> lines for that port.
That is correct.  On zaptel-1.4/misdn-1.1.x you should see a blinking 
red when layer 2 is not up, constant red when layer 2 is up, and it will 
flash green when D-channel messages are sent on the port.

-- 
Matthew Fredrickson
Software/Firmware Engineer
Digium, Inc.