search for: remap

http://www.intel.com/content/www/us/en/chipsets/5520-and-5500-chipset-ioh-specification-update.html Stepping B-3 has two errata (#47 and #53) related to Interrupt remapping, to which the workaround is for the BIOS to completely disable interrupt remapping. These errata are fixed in stepping C-2. Unfortunately this chipset is very common and many BIOSes are not disabling remapping. We can detect this in Xen and prevent turning on remapping in the first place. H...

Hi, Just started using an asterisk-based PBX with Polycom IP501 phones. Am Fairly satisfied and am starting to get into FTP setup of the phones. Have figured out most things except for how button remapping works. In sip.cfg, I have this entry: <keys key.IP_500.31.function.prim="DoNotDisturb"></keys> This works as expected but if I try to change the remapping to any other value like "MyStatus", "SpeedDialMenu", or "BuddyStatus", it doesn...

For IOAPIC interrupt remapping, it only needs to remap ioapci RTE, should not remap other IOAPIC registers, which are IOAPIC ID, VERSION and Arbitration ID. This patch adds the check for this and only remap ioapci RTE. Signed-off-by: Anthony Xu <anthony.xu@intel.com> Signed-off-by: Weidong Han <weidong.han@intel.co...

...un the same application installed in 2 Wine bottles (using Wibom) at the same time. Only one can run, not both. Because the app needs to access port numbers 10205,10206, etc., I suspect that running 2 of it (even from separate bottles) causes conflicts at the ports. I wonder if there is a way to remap the port numbers through Wine to different Linux port numbers?

Hi! I am using OpenBSD 4.4 with the build-in TFTP-Daemon for PXE. Distributing OpenBSD works fine. Now I want to distribute OpenBSD and WinPE. I've installed PXELinux 3.72 and configured it. Works also fine for PXELinux and distributing OpenBSD. To distribute WinPE I need a remap rule (\ -> /) for the TFTP-Daemon. I've created a file /etc/tftpd.remap with the following rule: rgG \\ / In /etc/inetd.conf the -m parameter is added: Tftp ... /usr/libexec/tftpd tftpd -m /etc/tftpd.remap -s /tftpboot Result: The TFTP-daemon dosen't start. I've checked the man pag...

1: IOMMU: properly check whether interrupt remapping is enabled 2: AMD IOMMU: only disable when certain IVRS consistency checks fail 3: VT-d: deal with 5500/5520/X58 errata Patch 1 and 2 are version 2 of a previously submitted, then withdrawn patch following up after XSA-36. Patch 3 is version 3 of a patch previously sent by Malcolm and Andrew....

Hi, Found CloneBasicBlock utility only does the cloning without any remapping. Consider below example: Input block: sw.epilog: ; preds = %sw.bb20, %sw.bb15, %sw.bb10, %sw.bb6, %sw.bb2, %sw.bb, %while.body, %if.end29 %no_final.1 = phi i32 [ %no_final.055, %while.body ], [ 1, %if.end29 ], [ %no_final.055, %sw.bb20 ], [ %no_final.0...

I have an Intel e1000e NIC which I put into passthrough for an HVM domain under Xen 4.2. All the corresponding hardware protections are enabled on my system (DMA + Interrupt remapping), however, once in a while I get a SERR NMI in dom0 (NMI - PCI sys error (SERR) in xl dmesg). I am wondering about its exact reason. I am thinking in the following way: [+] Under Intel VT-x, interrupts are virtualized, thus all the interrupts coming from my HVM domain should be handled by the...

I cannot seem to get the remap-file function of tftpd working right. I can sucessfully place files on the server but the remap feature is not working. I look in the logfile and it has an entry in there for tftpd. remap: input: startup-config Jan 13 21:47:50 proxy in.tftpd[25438]: remap: done Jan 13 21:47:50 proxy in.tftpd[25438...

Hello, This about remapping in the HPA tftp server. A client does request for '/tftpboot/ncd4/foo' which should be 'ncd4/foo' I have created a remap file that looks now like this: r tftpboot/ncd4/modshmx/login.hmx ncd4/modshmx/login.hmx r tftpboot/ncd4/modshmx/setup.hmx ncd4/modshmx/setup.hmx r tftpboo...

...-- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tftpd/tftpd.8.in b/tftpd/tftpd.8.in index b500d27..71a712d 100644 --- a/tftpd/tftpd.8.in +++ b/tftpd/tftpd.8.in @@ -155,7 +155,7 @@ or .B utimeout option is negotiated. The default is 1000000 (1 second.) .TP -\fB\-\-mapfile\fP \fIremap-file\fP, \fB\-m\fP \fIremap-file\fP +\fB\-\-map-file\fP \fIremap-file\fP, \fB\-m\fP \fIremap-file\fP Specify the use of filename remapping. The .I remap-file is a file containing the remapping rules. See the section on filename @@ -238,7 +238,7 @@ option, but crash with an error if they actual...

Hi - Has anybody been able to successfully remap SpeedDials on Polycom phones? The manual seems to indicate that you can, and I followed the advice in this list message: http://lists.digium.com/pipermail/asterisk-users/2005-October/129142.html The result I get is that the remapped buttons act as the VolumeUp button, rather than as a speed dial....

[1.2]-S.T.A.L.K.E.R.:SoC - Remapping keys? Hi, I am running Wine 1.2 on Ubuntu 10.04 32bit Linux. I wish to remap the movement keys in: S.T.A.L.K.E.R.: Shadow of Chernobyl, but when I try, it always maps "Pause" ? Any help would be appreciated! Running game through Valve's Steam client. Game seems to work fine ot...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Xen Security Advisory CVE-2013-0153 / XSA-36 version 3 interrupt remap entries shared and old ones not cleared on AMD IOMMUs UPDATES IN VERSION 3 ==================== Public release. ISSUE DESCRIPTION ================= To avoid an erratum in early hardware, the Xen AMD IOMMU code by default chooses to use a single interrupt remapping table for the whole system. T...

...ik) PPC and x86, and x86 does not yet promise any kind >>> >> of stability. >> > >> > Hmm I think Jan (cc) said it was already used out there. > Yes, no known issues with vt-d emulation for almost a year now. Error > reporting could be improved, and interrupt remapping is still missing, > but those are minor issues in this context. On the other hand interrupt remapping is absolutely necessary for production use, hence my point that x86 does not promise API stability. ("Any kind of stability" actually didn't include crashes; those are not ex...

...ik) PPC and x86, and x86 does not yet promise any kind >>> >> of stability. >> > >> > Hmm I think Jan (cc) said it was already used out there. > Yes, no known issues with vt-d emulation for almost a year now. Error > reporting could be improved, and interrupt remapping is still missing, > but those are minor issues in this context. On the other hand interrupt remapping is absolutely necessary for production use, hence my point that x86 does not promise API stability. ("Any kind of stability" actually didn't include crashes; those are not ex...

Hi, Without this patch, I get a "remap rules cannot be inverted" error message with any remap rule: --- tftp-hpa-0.40/tftpd/remap.c.old 2005-03-16 16:34:34.000000000 -0500 +++ tftp-hpa-0.40/tftpd/remap.c 2005-03-16 16:22:49.000000000 -0500 @@ -275,6 +275,7 @@ int lineno = 0; int err = 0; + memset(this_rule, '\0',...

During the conversion process, hd* block devices under Xen are mapped to sd* devices for use under guestfs. These sd devices are later remapped to vd* (or sd/hd) devices, for future use under kvm. The current code fails to track the original hd* device names. This causes subsequent remappings of the block devices (in such places as /etc/fstab, and /boot/grub/menu.lst), to skip the hd* devices, which leads to a later failure of the gues...

On 28/07/2015 18:42, Jan Kiszka wrote: > > On the other hand interrupt remapping is absolutely necessary for > > production use, hence my point that x86 does not promise API stability. > > Well, we currently implement the features that the Q35 used to expose. > Adding interrupt remapping will require a new chipset and/or a hack > switch to ignore compatib...

On 28/07/2015 18:42, Jan Kiszka wrote: > > On the other hand interrupt remapping is absolutely necessary for > > production use, hence my point that x86 does not promise API stability. > > Well, we currently implement the features that the Q35 used to expose. > Adding interrupt remapping will require a new chipset and/or a hack > switch to ignore compatib...