thr3ads.net - asterisk users - [asterisk-users] Help: CallerID Name not being sent on outbound PRI trunk [Feb 2007]

If this information is useful, please help other people find it:
Share via:

Webster, Andrew

2007-Feb-28 13:33 UTC

[asterisk-users] Help: CallerID Name not being sent on outbound PRI trunk

Outbound calls on my Telus PRI aren't taking the Name portion of the
callerID. I've looked at the logs, and it is being set (see below), but
the PRI debug output doesn't show the name being sent anywhere. As a
result, received calls always display from Unknown (or just the number).
Is there some config that I've missed somewhere?

I'm running NI-1 (Telus says NI-2 doesn't support the name feature, so
they've changed my link type).
Version: Asterisk 1.2.14 svn rev 48468


Asterisk Log:
Executing Set("SIP/304-091aafb8",
"CALLERID(all)=Andrew<nnnnnnnnnn>") in
new stack
(I've replaced the digits with n).

PRI debug shows:> Protocol Discriminator: Q.931 (8) len=42
> Call Ref: len= 2 (reference 4/0x4) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a2]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)> Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
> Ext: 1 User information layer 1: u-Law (34)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
Dchan: 0> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 1 ]
> [6c 0c 21 80 nn nn nn nn nn nn nn nn nn nn]
> Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)> Presentation: Presentation permitted, user number not screened (0)'nnnnnnnnnn' ]
>From zapata.conf:callerid=asreceived

;Sangoma A101 port 1 [slot:12 bus:0 span: 1]
switchtype=ni1
context=from-zaptel
overlapdial=yes
facilityenable=yes
group=0
signalling=pri_cpe
channel => 1-23

Thanks!
--
Andrew

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070228/24e6c41b/attachment.htm

Mike Lynchfield

2007-Feb-28 15:41 UTC

head link

[asterisk-users] Help: CallerID Name not being sent on outbound PRI trunk

nice one.. we have rogers and primus.. ni'2 and same..

let me know if this ni2 and ni1 thing is crap or not

On 2/28/07, Webster, Andrew <awebster@connectalk.com>
wrote:>
>  Outbound calls on my Telus PRI aren't taking the Name portion of the
> callerID. I've looked at the logs, and it is being set (see below), but
the
> PRI debug output doesn't show the name being sent anywhere. As a
result,
> received calls always display from Unknown (or just the number).
> Is there some config that I've missed somewhere?
>
> I'm running NI-1 (Telus says NI-2 doesn't support the name feature,
so
> they've changed my link type).
> Version: Asterisk 1.2.14 svn rev 48468
>
>
> Asterisk Log:
> Executing Set("SIP/304-091aafb8",
"CALLERID(all)=Andrew<nnnnnnnnnn>") in
> new stack
> (I've replaced the digits with n).
>
> PRI debug shows:
> > Protocol Discriminator: Q.931 (8) len=42
> > Call Ref: len= 2 (reference 4/0x4) (Originator)
> > Message type: SETUP (5)
> > [04 03 80 90 a2]
> > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Speech (0)
> > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
> > Ext: 1 User information layer 1: u-Law (34)
> > [18 03 a9 83 81]
> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
> Dchan: 0
> > ChanSel: Reserved
> > Ext: 1 Coding: 0 Number Specified Channel Type: 3
> > Ext: 1 Channel: 1 ]
> > [6c 0c 21 80 nn nn nn nn nn nn nn nn nn nn]
> > Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> > Presentation: Presentation permitted, user number not screened (0)
> 'nnnnnnnnnn' ]
>
> >From zapata.conf:
> callerid=asreceived
>
> ;Sangoma A101 port 1 [slot:12 bus:0 span: 1]
> switchtype=ni1
> context=from-zaptel
> overlapdial=yes
> facilityenable=yes
> group=0
> signalling=pri_cpe
> channel => 1-23
>
> Thanks!
> --
> Andrew
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>

-- 
Mike
Sales Manager
http://www.voicemeup.com
Making it happen
1.877.807.VOIP (8647)
1.514.312.7030
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070228/d22c32ff/attachment.htm

Trevor Peirce

2007-Feb-28 19:18 UTC

head link

[asterisk-users] Help: CallerID Name not being sent on outbound PRI trunk

I have a TELUS PRI for a while, resold via Bell... dropped it after a 
few months due to broken promises and failure to deliver /any/ of the 
things we said we required when ordering.

During this time, I learned that with a TELUS PRI you cannot send name.  
It's simply dropped at the switch.  If you want a name to show up, you 
have to beg and plead for them to manually update a database of theirs.  
On top of this, that name will show up on *all* DIDs associated with 
your block, so you will have to either have no name, a generic name of 
sorts, or buy individual phone numbers at a higher rate and beg them 
each time to manually do the update.

If you find another way, please do share... but that is 6 months 
headache we had just to find out that it was impossible to send the 
name, despite the majority of their technicians stating otherwise.

This is in BC.  Maybe it's different in Alta?

Webster, Andrew wrote:>
> Outbound calls on my Telus PRI aren't taking the Name portion of the 
> callerID. I've looked at the logs, and it is being set (see below), 
> but the PRI debug output doesn't show the name being sent anywhere. As 
> a result, received calls always display from Unknown (or just the number).
> Is there some config that I've missed somewhere?
>
> I'm running NI-1 (Telus says NI-2 doesn't support the name feature,
so
> they've changed my link type).
> Version: Asterisk 1.2.14 svn rev 48468
>
>
> Asterisk Log:
> Executing Set("SIP/304-091aafb8",
"CALLERID(all)=Andrew<nnnnnnnnnn>")
> in new stack
> (I've replaced the digits with n).
>
> PRI debug shows:
> > Protocol Discriminator: Q.931 (8) len=42
> > Call Ref: len= 2 (reference 4/0x4) (Originator)
> > Message type: SETUP (5)
> > [04 03 80 90 a2]
> > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer 
> capability: Speech (0)
> > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
> > Ext: 1 User information layer 1: u-Law (34)
> > [18 03 a9 83 81]
> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive 
> Dchan: 0
> > ChanSel: Reserved
> > Ext: 1 Coding: 0 Number Specified Channel Type: 3
> > Ext: 1 Channel: 1 ]
> > [6c 0c 21 80 nn nn nn nn nn nn nn nn nn nn]
> > Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: 
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> > Presentation: Presentation permitted, user number not screened (0) 
> 'nnnnnnnnnn' ]
>
> >From zapata.conf:
> callerid=asreceived
>
> ;Sangoma A101 port 1 [slot:12 bus:0 span: 1]
> switchtype=ni1
> context=from-zaptel
> overlapdial=yes
> facilityenable=yes
> group=0
> signalling=pri_cpe
> channel => 1-23
>
> Thanks!
> --
> Andrew
>
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

C F

2007-Mar-01 19:04 UTC

head link

[asterisk-users] Help: CallerID Name not being sent on outbound PRI trunk

On 2/28/07, Webster, Andrew <awebster@connectalk.com>
wrote:>
>
>
>
> Outbound calls on my Telus PRI aren't taking the Name portion of the
> callerID. I've looked at the logs, and it is being set (see below), but
the
> PRI debug output doesn't show the name being sent anywhere. As a
result,
> received calls always display from Unknown (or just the number).
>  Is there some config that I've missed somewhere?
>
>  I'm running NI-1 (Telus says NI-2 doesn't support the name
feature, so
> they've changed my link type).
>  Version: Asterisk 1.2.14 svn rev 48468
Interesting, just finished a long day with a client that switched from
20+ POTS to a T1 using NI2 and CallerID Name (on inbound). So I guess
NI2 does support CallerID Name.
>
>
>  Asterisk Log:
>  Executing Set("SIP/304-091aafb8",
> "CALLERID(all)=Andrew<nnnnnnnnnn>") in new stack
>  (I've replaced the digits with n).
>
>  PRI debug shows:
>  > Protocol Discriminator: Q.931 (8) len=42
>  > Call Ref: len= 2 (reference 4/0x4) (Originator)
>  > Message type: SETUP (5)
>  > [04 03 80 90 a2]
>  > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Speech (0)
>  > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
>  > Ext: 1 User information layer 1: u-Law (34)
>  > [18 03 a9 83 81]
>  > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
> Dchan: 0
>  > ChanSel: Reserved
>  > Ext: 1 Coding: 0 Number Specified Channel Type: 3
>  > Ext: 1 Channel: 1 ]
>  > [6c 0c 21 80 nn nn nn nn nn nn nn nn nn nn]
>  > Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>  > Presentation: Presentation permitted, user number not screened (0)
> 'nnnnnnnnnn' ]
>
>  >From zapata.conf:
>  callerid=asreceived
>
>  ;Sangoma A101 port 1 [slot:12 bus:0 span: 1]
>  switchtype=ni1
>  context=from-zaptel
>  overlapdial=yes
>  facilityenable=yes
>  group=0
>  signalling=pri_cpe
>  channel => 1-23
>
>  Thanks!
>  --
>  Andrew
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>

C F

2007-Mar-03 20:06 UTC

head link

[asterisk-users] Help: CallerID Name not being sent on outbound PRI trunk

Mike there aint such thing as outbound caller id name that you send
and a pots subscriber sees. so drop it.

On 3/3/07, Tzafrir Cohen <tzafrir.cohen@xorcom.com>
wrote:> On Sat, Mar 03, 2007 at 11:52:38AM -0500, Mike Lynchfield wrote:
> > >From what i was told via the GT guys at bell
> >
> > >The customer should send
> >
> > I 1C Standard Facility                   Length =  21
> > 9F   Serv Discrim             Networking Extensions
> > PDU Component Begins (hex)
> > 8B0100A10F020101...
> >
> > instead of:
> >
> > I 28 Display Length = 9
> > E Display .JIMBOB
> >
> >
> > so we sending Ascii and they want HEXA..
> >
> > can someone  forward this to Matt Frederickson and the -dev list ?
> >
> > this is what fellow canadian telcos want to see..
>
> Why won't you subscribe to the asterisk-dev list yourself and post it?
>
> Matt Frederickson does read it.
>
> >
> > PLEASE !
>
> Screaming will not help you. For me you have already earned quite a few
> bad points with your previous post to this list.
>
> --
>                Tzafrir Cohen
> icq#16849755                    jabber:tzafrir@jabber.org
> +972-50-7952406           mailto:tzafrir.cohen@xorcom.com
> http://www.xorcom.com  iax:guest@local.xorcom.com/tzafrir
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Maybe Matching Threads

Search for more seemingly similar threads

asterisk users - Feb 2007 - Help: CallerID Name not being sent on outbound PRI trunk

[asterisk-users] Help: CallerID Name not being sent on outbound PRI trunk

[asterisk-users] Help: CallerID Name not being sent on outbound PRI trunk

[asterisk-users] Help: CallerID Name not being sent on outbound PRI trunk

[asterisk-users] Help: CallerID Name not being sent on outbound PRI trunk

[asterisk-users] Help: CallerID Name not being sent on outbound PRI trunk

Maybe Matching Threads