search for: nnnnnnnnnn

...Username Refresh State sip.broadvoice.com:5060 6033751414@s 120 Auth. Sent I added this to my sip.conf: externip=xxx.xxx.xxx.xxx localnet=10.1.0.0 localmask=255.255.0.0 nat=yes My /etc/asterisk/sip_additional.conf contains this relevant portion: register=> nnnnnnnnnn@sip.broadvoice.com:pppppppppp:nnnnnnnnnn@sip.broadvoice.com/2 00 [from-broadvoice] username=nnnnnnnnnn user=nnnnnnnnnn type=user secret=pppppppppp nat=yes insecure=very host=sip.broadvoice.com fromdomain=sip.broadvoice.com dtmfmode=inband context=from-pstn [sip.broadvoice.com] username=nnnnnnnnnn...

...). Is there some config that I've missed somewhere? I'm running NI-1 (Telus says NI-2 doesn't support the name feature, so they've changed my link type). Version: Asterisk 1.2.14 svn rev 48468 Asterisk Log: Executing Set("SIP/304-091aafb8", "CALLERID(all)=Andrew<nnnnnnnnnn>") in new stack (I've replaced the digits with n). PRI debug shows: > Protocol Discriminator: Q.931 (8) len=42 > Call Ref: len= 2 (reference 4/0x4) (Originator) > Message type: SETUP (5) > [04 03 80 90 a2] > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer...

...tion is in one office via 100 M switches, very simple direct path. Firefly running Windows XP SP2. We're planning to try another softphone but quite like Firefly. Can anyone advise on this? Thanks Paul =========== Log extract -- Hungup 'Zap/1-1' == Spawn extension (bodiam, NNNNNNNNNN, 1) exited non-zero on 'IAX2/353@353/ 10' -- Hungup 'IAX2/353@353/10' -- Registered '355' (AUTHENTICATED) at XXXXXXXXXXXX -- Registered '354' (AUTHENTICATED) at XXXXXXXXXXXX -- Accepting AUTHENTICATED call from XXXXXXXXXXXX requested format = 1024 , a...

I have a very lite layout and attempting to get the SIP configuration set up initially before proceeding into other areas. VMware is running my Asterisk 11 on Ubuntu 12. Shouldnt I be able to at least ping the SIP provider IP? I run command "sip show registry" and do not see it set up. I run sip show peers and I do see an entry. I have not configured anything other then entries in the

...seconds. For each queue to be used in telemarketing, the program counts the number of members that are "Not In Use". If at least one is found, it reads that many phone numbers from the database and uses the AMI Originate command on each one, as follows: Action: Originate Channel: Local/NNNNNNNNNN at from-internal Exten: CCCC Context: from-internal Priority: 1 Async: true ActionID: xxx Here, NNNNNNNNNN is the number read from the database and CCCC is the queue extension in the FreePBX-created context that eventually runs the Queue() dialplan application for the corresponding queue. This cau...

..., the program counts the number of members >> that are "Not In Use". If at least one is found, it reads that many phone >> numbers from the database and uses the AMI Originate command on each one, >> as follows: >> >> Action: Originate >> Channel: Local/NNNNNNNNNN at from-internal >> Exten: CCCC >> Context: from-internal >> Priority: 1 >> Async: true >> ActionID: xxx >> >> Here, NNNNNNNNNN is the number read from the database and CCCC is the >> queue extension in the FreePBX-created context that eventually runs...

...queue to be used in telemarketing, the program counts the number of members that are "Not In Use". If at least one is found, it reads that many phone numbers from the database and uses > the AMI Originate command on each one, as follows: > > Action: Originate > Channel: Local/NNNNNNNNNN at from-internal > Exten: CCCC > Context: from-internal > Priority: 1 > Async: true > ActionID: xxx > > Here, NNNNNNNNNN is the number read from the database and CCCC is the queue extension in the FreePBX-created context that eventually runs the Queue() dialplan application for...

On 12/13/19 9:28 PM, Greg Troxel wrote: > sean darcy <seandarcy2 at gmail.com> writes: > >> I'm moving asterisk to a laptop, so can't use the dahdi board. Is >> there any supported USB dahdi device ? I see the Sangoma USBfxo >> device, but the dahdi driver no longer supports it. Anything else ? > > There is also the ObiHai OBi202 with an OBiLine, which

...y service" of the SP2. So while I can dial **N to > make it do other things (an obi thing), if I pick it up and dial my > hello world extension it works. PH2 is similar but on SP3. > > Then, I have another sip login on SP1, for the FXO port, and an inbound > call route to sp1(NNNNNNNNNN) - just to have a dialplan destination for > incoming calls. When the POTS line rings, asterisk gets an INVITE and > can route it back out to PH, or whatever. I have set the 'spoof > callerid" flag on the obi, so that the callerid from POTS is passed to > asterisk as the orig...

...trafic on all ports FROM a block but it does also block a httpd, ping etc TO a ip in a block what I do not want. For example today I got a CodeRed probe on my apache server from an infected Korean IT consultancy agency (duh!) 152.149.234.33 - - [08/Jan/2003:17:23:24 +0100] "GET /default.ida?NNNNNNNNNN On http://logi.cc/nw/NetCalc.php3 I calculate the IP netblock from a whois and put it in /etc/shorewall/blacklist with a little information. # inetnum: 152.149.0.0 - 152.149.255.255 # netname: DAEWOO-KR # descr: Daewoo Information Systems Co., Ltd. # descr: ADMIN : CodeRed...