search for: facilityen

Can someone explain what the facilityenable setting does in zapata.conf I've read the wiki & archive, but it's not even clear what an ISDN "facility" is. Thanks, MD -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/2007111...

...ulse too. With direct connection PBX works great and use both synchronization and give impulse value so there must be problem on Asterisk side. Machine is using lastest versions of Asterisk 1.2 branch (at time of writing: zaptel 1.2.22, libpri 1.2.6, asterisk 1.2.24) on Fedora Core 4. I tried with facilityenable=yes as well without success. I do not exactly know what facilityenable for. Is Asterisk capable forwarding D-Channel and making Asterisk box totally transparent? If yes which version? If branch 1.2 is capable how should I setup it right? Thanks. bye, a

...1 WARNING[27273] chan_zap.c: Ignoring localprefix Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring privateprefix Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring unknownprefix Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring priindication Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring facilityenable Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring signalling Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring signalling A lot of changes? DV

...eeping the callerid of the caller so it can be presented to the receiver of the transferred call. At the time we're using Zaptel 1.4.5.1, Asterisk 1.4.11 and Digium hardware TE420B. We've ordered the service (CD) from the phone company. The zapata.conf file inlcludes: Transfer= yes Facilityenable=yes Callerid=asreceived In extensions.conf we try to transfer a call to an external extension as: Transfer(ZAP/g0/ xxxxxxxx) but that fails with the ${TRANSFERSTATUS} = UNSUPPORTED. Ideas anyone? We would really appreciate it! Kind regards, Hanna Hanna Wallin Sy...

...up the phone (Internal ext. 321) -> CallerID shown on customers device changes to 020212345-321 Same when I park the call and pick it up on another phone. I don't want this to happen and can't figure out how to disable this on DAHDI or at least the current channel. I tried "facilityenable=no" in chan_dahdi.conf, but this only supresses signalling the on hold status. We are using a german ISDN "Anlagenanschluss" (bri_cpe) whith DDI served by the Deutsche Telekom, connected to a ISDN card which is used with DAHDI. Is there a hidden config flag or something to dis...

...ed to dumb it down from NI2 to NI1, but asterisk still tries to send the callerID name in the PRI debug. Is there a way to send callerid number and not the name? ref. zapata.conf: context=panasonic swichtype=national pridialplan=unknown prilocaldialplan=unknown signalling=pri_net usecallerid=yes facilityenable=no hidecallerid=yes ;fix for no answer restrictcid=yes usecallingpres=no echocancel=no echocancelwhenbridged=no group=2 channel => 25-47 -- -- Steven http://www.glimasoutheast.org

...Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) > Presentation: Presentation permitted, user number not screened (0) 'nnnnnnnnnn' ] >From zapata.conf: callerid=asreceived ;Sangoma A101 port 1 [slot:12 bus:0 span: 1] switchtype=ni1 context=from-zaptel overlapdial=yes facilityenable=yes group=0 signalling=pri_cpe channel => 1-23 Thanks! -- Andrew -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070228/24e6c41b/attachment.htm

the CNAM info in the Q.931 call setup message. I've tried all permutations of switchtype (dms100 & national) and facilityenable that I can think of, but I still don't see CNAM coming out the other side. Telco confirms that "Name Out" is enabled on our PRI. Any pointers on what I'm missing, and/or how to debug further? zapata.conf: --- [channels] context=default callerid=asreceived usecallerid=yes...

the CNAM info in the Q.931 call setup message. I've tried all permutations of switchtype (dms100 & national) and facilityenable that I can think of, but I still don't see CNAM coming out the other side. Telco confirms that "Name Out" is enabled on our PRI. Any pointers on what I'm missing, and/or how to debug further? zapata.conf: --- [channels] context=3Ddefault callerid=3Dasreceived usecallerid...

...gt; 12:58:11 WARNING[27273] chan_zap.c: Ignoring privateprefix Jun 21 > > > 12:58:11 WARNING[27273] chan_zap.c: Ignoring unknownprefix Jun 21 > > > 12:58:11 WARNING[27273] chan_zap.c: Ignoring priindication Jun 21 > > > 12:58:11 WARNING[27273] chan_zap.c: Ignoring > facilityenable Jun 21 > > > 12:58:11 WARNING[27273] chan_zap.c: Ignoring signalling Jun 21 > > > 12:58:11 WARNING[27273] chan_zap.c: Ignoring signalling > > > > Missing '[channels]' ? > > > > Could you provide the complete file? > > ; > ; Zapata te...

...ntext=from-internal switchtype = euroisdn ;overlapdial = outgoing priindication = inband signalling = pri_net channel => 32-46,48-62 context = default group = 63 Span 4: WPE1/3 "wanpipe4 card 3" HDB3/CCS/CRC4 group=4,14 context=outrt-001-PSTN_E1 switchtype=qsig signalling=pri_cpe ;facilityenable=yes ;callprogress=yes pridialplan=unknown prilocaldialplan=unknown ;priindication = outofband ;overlapdial = incoming ;priexclusive = yes ;pritimer => t200,1000 ;pritimer => t313,4000 ;immediate=yes channel => 94-108,110-124 context = default group = 63 Any suggestion will be much ap...

...fault usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no facilityenable=yes callerid=asreceived ;Sangoma A104 port 1 [slot:4 bus:17 span:1] <wanpipe1> switchtype=qsig context=from_nortel group=0 echocancel=yes faxdetect=incoming signalling=pri_cpe channel =>1-15,17-31 -------------- next part -------------- An HTML attachment was scrubbed... URL: <ht...

...t; |[trunkgroups] [channels] language=de switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown internationalprefix = 00 nationalprefix = 0 ;localprefix = VORWAHL ;privateprefix = VORWAHL+MSN ;unknownprefix = priindication = outofband facilityenable = yes usecallerid=yes callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes immediate=no echocancel=yes echocancelwhenbridged=yes echotraining=yes callgrou...

Hello, A client has asked for Two B channel Transfer capability (known as TBCT or 2BCT, similar to other features such as ECT, RTL and Q,SIG Path Replacement) in a new Asterisk system and so I researched the capability and came up with quite a few gaps in documentation.

...fband usecallerid = yes hidecallerid = no callwaiting = yes usecallingpres = yes callwaitingcallerid = yes threewaycalling = yes transfer = yes cancallforward = yes callreturn = yes group = 1 callgroup = 0 pickupgroup = 0 immediate = no echotraining = yes echocancel = yes echocancelwhenbridged = no facilityenable = yes musiconhold = default ;overlapdial = yes overlapdial = no immediate = no txgain = -4.0 rxgain = -4.0 signalling = pri_cpe channel => 1-15 ;channel => 17-32 channel => 17-24 ;toneduration=100 toneduration=300 ;relaxdtmf=yes Thanks, -- Andres Jimenez GPG : http://www.andresin...

...hould forward our calls to the telco. This setup works correctly as far as I use euroisdn as the switchtype. The first problem was that it is only possible to run the * side in CPE-mode -- I wanted NET. Anyway, I configured * this way: switchtype=qsig signalling = bri_cpe facilityenable = yes My experience now is that it is possible to signal a call (both outgoing and incoming) but as soon as the callee takes off the hook the call-setup crashes. Below is the debug log of an outgoing call to a service number of the telco which tells the current time. (The point is that the ca...

...nknown priindication = outofband signalling=pri_cpe usecallerid=yes hidecallerid=no usecallingpres=yes echocancel=yes echocancelwhenbridged=no echotraining=800 group=0 callgroup=1 pickupgroup=1 useincomingcalleridonzaptransfer=yes callerid=asreceived accountcode=I musiconhold=default overlapdial=no facilityenable=yes channel => 1-23 My zconfig.h is using the default EC method. #define ECHO_CAN_KB1 I am getting echo on both SIP and ZAP (digital PRI bridged on same card) endpoints. -- -- Steven

...pinions on what the "echocancelwhenbridged" line does. Some say it turns off the echo canceller for TDM to TDM calls if set to yes, some say if it is set to no. Which is correct? ;Zaptel Channels Configurations (zapata.conf) [trunkgroups] [channels] context=default usecallerid=yes facilityenable=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes resetinterval=never rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sang...

...sterisk+bounty+PRI+2B+channel+transfer+for+NI2+PRI+line http://www.voip-info.org/wiki/index.php?page=Asterisk%20bounty%20PRI%202B%20channel%20transfer As for actually using this feature, you apparently need to add the following lines to the zapata.conf section that you want to be able to use 2BCT: facilityenable = yes transfer=yes To execute the transfer, you need to use the "Transfer" cmd within Asterisk: http://voipinfo.org/wiki/view/Asterisk+cmd+Transfer And according to this post, you can only do 2BCT transfers if the first call is inbound: http://www.mail-archive.com/asterisk-dev at li...

I am trying to send 'codes' over an isdn2 link - such as *#24# - to activate call forwarding. But it doesn't work. I have tried sending it as a straight dial, and also as a DTMF string...but no luck... I spoke to a telco tech and he said I had to send a facility code....huh? Anyone with any ideas on this one? PaulH