Hi,
sorry for the newbie hardware questions but here it goes
scenario
- our telco is feeding us e1 thru coax connection (unbalanced)
- so the coax feed rx-tx goes to our old pabx using ericsson bp250
- what we wanted to do is to install asterisk in between hence
telco<-->asterisk<-->bp250 using asterisk to power up the voip
portion
the problem is the we are getting crackling sound when we make calls from
the old pabx extension, it seems that there is a lot of line noise due to
emc.
so here goes the newbie question:
current setup is that from the coax we are using a balun using the given
cables from sangoma
will the cisco *CAB-E1-RJ45BNC *connector work on the 102 ie no need to use
the balun
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070216/5be8fbd5/attachment.htm
