similar to: sangoma 102 and CAB-E1-RJ45BNC

Hi, I am new with asterisk. I am setting a Wildcard TE405P. E1s in Italy come in on a pair of RG-59 coax cables with BNC connectors. So I need an adapter/balun http://www.allcomtlc.com/al_g703n3.htm . I have It but I am not sure that It works. I have configured my asterisk in this way: zaptel.conf span=1,1,0,ccs,hdb3,crc4 dchan=16 bchan=1-15,17-31 loadzone=it defaultzone=it zapata.conf

Hi List, This is somewhat off-topic since the problem itself isn?t asterisk but the Ericsson BP250 I want to connect to. But since there have been a couple of posts relating in part to that system I am hoping someone can help me out. What we want to do: PRI <---> BP250 <---> Asterisk Currently the BP250 handles extension 000 - 899. We now would like to forward a chunk of 100

Hi All, I have configure my Asterisk as follow (using Asterisk@home): [zaptel.conf] span=1,1,0,ccs,hdb3,yellow bchan=1-15,17-31 dchan=16 loadzone = uk defaultzone=uk [zapata.conf] [channels] switchtype=euroisdn pridialplan=local prilocaldialplan=local internationalprefix=00 nationalprefix=0 usecallingpres=yes busydetect=no ; not need on pri callprogress=no ; was yes but wiki says experimatley

hi, i'm having problems getting asterisk spliced between an E1 PRI (german Telco Arcor) and an Ericsson Business Phone 250 digital PBX. The Asterisk Server has a TE405P with it's port 1 connected to the E1 PRI provided by our telecommunications provider Arcor and port 2 connected to the E1 PRI of our Ericsson BP250. the setup before: Arcor TelCo PRI(E1)

Dear All, I have a setup where three errision PBX's (head office & 2 branch offices ) are @ three different location. Head of has a errision BP250 where the branch officers has Errision BP50's. I wana connect all three PBX's through IP link's. My idea is to connect BP250 ( head office ) to asterisk. This has to be done using analog interfacing coz there is no E1 / or T1

Hello Im from Denmark and i've just got my Digium TE405P. But i have some problems when i connect it to my E1 connection (ISDN30). My telco delivered a alcatel box witch have a G.703 120ohm (DB9 with a serial to rj45) and a 75ohm coax connection. I've tried to connect using the 120ohm with rj45 and a ordinary utp cable. But it dosent seem to work. I've tried several zaptel.conf

Hi, Urgently response would be wonderful, system is a Fedora Core 2. I have a Ericsson BP250 connected to 1 port on the TE405P and another connected to a local telco ISDN30. I have been running CVS-HEAD from about a 2 months ago and upgraded it again just in cause it was a version issue (didn't fix it) but this is what I am getting. When a person calls out from an extension on the BP250 to

hi, well, most of the things work right now due to the help of peter svensson, but after heavy use of our ericsson BP250 today several problems appeared. i split into several mails as they are seperate problems. * i can't signal Busy to the calling party. asterisk receives busy from the ericsson PBX but does not forward this to the external caller. i tried with exten =>

Hi, We have a Ericsson BP250 Phone system setup witht he following configuration Telco <-> Asterisk E405P <-> BP250 The system seem to work perfectly on 1.0.9 for a very long time but there is some functionality we wanted to take advantage of in the 1.2 version branch so we upgraded. Currently running Asterisk 1.2.4 Zaptel 1.2.3 (noticed 1.2.4 is out will upgrade next

hi, i have the problem that i'm not able to set and receive the Service Indication (SIN) from our E1-PRI and from our ericsson BP250. The problem is, that the Bearer Capability (BC) together with the High Level Compatibility (HLC) and Low Level Compatibility (LLC) forms the Service Indicator (SIN). The SIN is used to determine if the call is voice, fax or data. It's essential to set

Hi, Has anyone on this list tested out the new SE P1 phones ( http://www.uncrate.com/men/gear/cell-phones/sony-ericsson-p1/). It says it supports VOIP, wonder if it is working with asterisk. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070517/467cbea1/attachment.htm

Hello all. This is my very first message to the list. I have a TDM400P card, It has 2 FXO channels which are connected to extensions of my PBX (Ericsson BP250), so I can dial from any SIP softphone directly to physical (analog and digital) extensions on my company. My PBX is configured so when I dial 8 on any extension, it will redirect to the first free FXO channel on my TDM400P card.

hi, after several problems getting the right callerid on a E1-PRI there is (so far) only one problem left: when receiving calls over the telephone network from another E1-PRI that has a "Caller ID no screen" capability (e.g. a bank and a customer of us), asterisk does not get the callerid that is set up by the calling PBX, but the callerid of the trunk of the calling PRI. no matter

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

Hi, Running Asterisk CVS-Head latest on a Dual P3 800 1Gb Ram. For some odd reason now that I have the asterisk box almost to the stage I want it, I hit a problem. I have a te405p in the system, Zap/g1 is connected to the telco as an ISDN 30, Zap/g4 is connected by ISDN Primary Rate to an Ericcson BP250 phone system. When calls come in on g1 they go straight through instantaneously to the

Dear members of the list, I have difficulties to obtain sync with a Digium TE420 PCI Express For four entries E1, In my case I am with only 3 E1s available to configure. The telephony operator is BrasilTelecom and Signaling is R2 Digital. The information I have is that are E1s with 32 channels, not have sure. My settings Have been based on the link reference:

Good day. Spotted the CVE-2007-1870: the clamav 0.90.2 is already in the ports, but no sign of the issue in the VuXML. The entry is attached. One thing that is a bit strange is that the ChangeLog for the ClamAV (http://svn.clamav.net/svn/clamav-devel/trunk/ChangeLog) says about CVE-2007-1997 as the libclamav/cab.c log entry, but I think they are messed the numbers -- there is no such CVE, at

I'm trying to install the programming software for my ham radio, the Icom RS-91. There's an entry for version 1.0 that says platinum, but mine is either 1.1 or 1.10 (hard to tell from how they wrote it). Anyway, I'm getting the problem during install that it wants "DATA3.CAB", but no such animal exists on the disk; furthermore, all the disk's readable files say it

Greetings, during installation of Oblivion - Game of the Year Edition GOTY in German on wine-1.3.21 the installation asks for inserting Disc 0 with the file data3.cab. Well, there is no such data3.cab on the DVD. Workaround for me was booting to WinXP, installing Oblivion there, booting to Gentoo, mounting the WinXP partition and copying the directory Oblivion to a suitable place in ~/.wine.

When I'm trying to install DirectX, I get the following error at the beginning of installation process (after all confirmations): > A Cabinet file necessary for the installation cannot be trusted I have encountered this problem with multiple versions of wine and directx redistributables. I had no need in using directx for a long time, but looks like some features are not implemented for