search for: balun

...s callwaitingcallerid=yes ; show callerid on callwaitingcalls echotraining=no echocancel=no echocancelwhenbridged=no overlapdial=yes immediate=no callerid=asreceived language=de rxgain=0.0 txgain=0.0 group=1 signalling=pri_cpe context=pri1 channel => 1-15,17-31 I am connecting my TE110P with a Balun converter where the two BNC connectors are from connected to a Fibre optic line. When I reboot my pc , I got my TE110P LED flashing RED slowly. But nothing happen when I hooked up to Balun Convertor. Balun convertor is 75ohm on BNC and 120ohm on RJ45. I am using straight through cable to conne...

Hi, I am new with asterisk. I am setting a Wildcard TE405P. E1s in Italy come in on a pair of RG-59 coax cables with BNC connectors. So I need an adapter/balun http://www.allcomtlc.com/al_g703n3.htm . I have It but I am not sure that It works. I have configured my asterisk in this way: zaptel.conf span=1,1,0,ccs,hdb3,crc4 dchan=16 bchan=1-15,17-31 loadzone=it defaultzone=it zapata.conf switchtype = EuroISDN signalling = pri_cpe pridialplan = unknown co...

Hello Im from Denmark and i've just got my Digium TE405P. But i have some problems when i connect it to my E1 connection (ISDN30). My telco delivered a alcatel box witch have a G.703 120ohm (DB9 with a serial to rj45) and a 75ohm coax connection. I've tried to connect using the 120ohm with rj45 and a ordinary utp cable. But it dosent seem to work. I've tried several zaptel.conf

Hi, Digium's E400P has RJ45 conector and my E1 link has BNC concetor. Could someone tell me the cable pinouts to make this conection? thanks Eduardo

...<-->bp250 using asterisk to power up the voip portion the problem is the we are getting crackling sound when we make calls from the old pabx extension, it seems that there is a lot of line noise due to emc. so here goes the newbie question: current setup is that from the coax we are using a balun using the given cables from sangoma will the cisco *CAB-E1-RJ45BNC *connector work on the 102 ie no need to use the balun -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070216/5be8fbd5/attachment.htm

Has anyone implemented an outcall notification when there is a voice message waiting? I would like to have the system notify me of awaiting voice messages by a telephone call rather than an email notification. I would imagine that a call could be dumped into the asterisk spool directory, but I'm not sure how I would monitor for messages waiting. Has anyone implemented such a feature for

...ation of zaptel and get information that the module Zaptel (wct4xxp): The first three spans are configured (and connected to modens) but I am getting RED in zttool (end on the board leds) the fourth are not configured (commented). My suspicion is the cable RJ45 which did not (else one did), The baluns conversion are cisco. First question, as I am sure that the cables are correctly (RJ45) Built (Digium == RJ45 == balun === modem)? A cable network standard micro / switch work? May have a problem in my settings zaptel.conf? Thank you for the help and attention ... cat /etc/zaptel.conf ----...

Hi All, This is our 2nd E1 client that we try to use crc4 either with the e100p or with the e405p without luck. After some trials, we ask the telco to switch off crc4 on their side and everything works flawlessly. Is there anything in the crc4 calculation that may be broken? We took a look at wct1xxx.c and wct4xx.c but there doesn't seem to be much there to be fixed (apparently the crc4

I've tried to figure out from the web site the minimum hardware cost to run a small office Asterix solution but I'm afraid I miss something: Let's say that I want to connect four/five analogic extension to the PBX. I have: - 1 computer as the server (with linux and Asterisk on it) - 1 dummy patch panel to connect all the analogic phones around the office What (and how many) cards

Hi, At the moment, libpri /w Asterisk 1.6, Dahdi 2.1, is not supporting NT-Point to multi-point mode. Here (France), most small PBXes are connected to ISDN through BRI trunks in PtmP (don't know why but it seems the general case). So this NT-PtmP function would be very helpful to easily slide an Asterisk box between an existing PBX and the network. Does the same case apply elsewhere (UK,

....SIG switch Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 server1*CLI> I all changed the hardware for another server and changed to all the handles, balun and the SPAN of HiPath 4000. It will be some trouble of the hardware in the TE110P? Best Regards Josu? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061228/2b0376f7/attachment-0001.htm

I've done all the googling I can on this, and have come to the conclusion that a Grandstream BT101 can be abused to be a door phone. Could someone with access to one, confirm that the following is possible? Researched: 1. When set to auto-answer, dialing the phone will result in a short beep and instant speaker-phone connection. 2. When pressing the "message" button while