asterisk users - Jun 2006 - AddQueueMember and Local channels

Following on from a posting yesterday from Kevin, I have the following 
in the dialplan:

exten => 709,1,AddQueueMember(SomeQueue|Local/706@AgentQ)

I am on extension 706.

 From the CLI:

SomeQueue         has 0 calls (max unlimited) in 'rrmemory' strategy (0s
holdtime), W:0, C:0, A:3, SL:0.0% within 60s
    No Members
    No Callers

I call 709, get a console message


  NOTICE[30879]: app_queue.c:3122 aqm_exec: Added interface 
'Local/706@AgentQ' to queue 'SomeQueue'

from the CLI:

SomeQueue         has 0 calls (max unlimited) in 'rrmemory' strategy (0s
holdtime), W:0, C:0, A:3, SL:0.0% within 60s
    Members:
       Local/706@AgentQ (dynamic) (In use) has taken no calls yet
    No Callers


Notice the (In use) on the member. When I call the queue, the call is 
not passed onto the member, and there is no activity on the cli. 
Eventually the call times out.

If I add SIP/706 instead of Local/706@AgentQ then it all works as expected.

Any clues or help ? Many thanks !

Julian.

Kevin P. Fleming wrote:
 > ----- Julian Lyndon-Smith <asterisk@dotr.com> wrote:
 >> Now, I want to be able to use a device, rather than agents. So I can
 >> use addQueueMember and add my SIP device. However, I still want to 
do a couple of things before the device is called.
 >
 > This is what the Local channel (chan_local) is for.
 >
 > If your SIP device is called "myfancyphone", then instead of
adding
SIP/myfancyphone to the queue using AddQueueMember, add (instead) 
Local/myfancyphone@members, and then in your dialplan:
 >
 > [members]
 > exten => myfancyphone,1,...
 > exten => myfancyphone,n,...
 > exten => myfancyphone,n,Dial(SIP/${EXTEN})

Further to my post, I was going to revert SVN backwards until I got to a 
point where AddQueueMember works with the local channel

To this end, if anyone is using this functionality would they send me 
the version number and prefably svn number so that I can track things down.

It may be a config problem on my end - that's why I need to know a 
working version so that I can check my config on that version.

Many thanks.

Julian.

Julian Lyndon-Smith wrote:
> Following on from a posting yesterday from Kevin, I have the following 
> in the dialplan:
> 
> exten => 709,1,AddQueueMember(SomeQueue|Local/706@AgentQ)
> 
> I am on extension 706.
> 
>  From the CLI:
> 
> SomeQueue         has 0 calls (max unlimited) in 'rrmemory'
strategy (0s
> holdtime), W:0, C:0, A:3, SL:0.0% within 60s
>    No Members
>    No Callers
> 
> I call 709, get a console message
> 
> 
>  NOTICE[30879]: app_queue.c:3122 aqm_exec: Added interface 
> 'Local/706@AgentQ' to queue 'SomeQueue'
> 
> from the CLI:
> 
> SomeQueue         has 0 calls (max unlimited) in 'rrmemory'
strategy (0s
> holdtime), W:0, C:0, A:3, SL:0.0% within 60s
>    Members:
>       Local/706@AgentQ (dynamic) (In use) has taken no calls yet
>    No Callers
> 
> 
> Notice the (In use) on the member. When I call the queue, the call is 
> not passed onto the member, and there is no activity on the cli. 
> Eventually the call times out.
> 
> If I add SIP/706 instead of Local/706@AgentQ then it all works as expected.
> 
> Any clues or help ? Many thanks !
> 
> Julian.
> 
> Kevin P. Fleming wrote:
>  > ----- Julian Lyndon-Smith <asterisk@dotr.com> wrote:
>  >> Now, I want to be able to use a device, rather than agents. So I
can
>  >> use addQueueMember and add my SIP device. However, I still want
to
> do a couple of things before the device is called.
>  >
>  > This is what the Local channel (chan_local) is for.
>  >
>  > If your SIP device is called "myfancyphone", then instead
of adding
> SIP/myfancyphone to the queue using AddQueueMember, add (instead) 
> Local/myfancyphone@members, and then in your dialplan:
>  >
>  > [members]
>  > exten => myfancyphone,1,...
>  > exten => myfancyphone,n,...
>  > exten => myfancyphone,n,Dial(SIP/${EXTEN})
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>

----- Julian Lyndon-Smith <asterisk@dotr.com> wrote:
> It may be a config problem on my end - that's why I need to know a 
> working version so that I can check my config on that version.
No, it's a bug, and we'll get it addressed today.

-- 
Kevin P. Fleming
Senior Software Engineer
Digium, Inc.