Hello,
We have several systems that use crossover PRIs. You need to have one
set to pri_cpe and one set to pri_net, other than that, all other
settings should be identical.
What version of Asterisk are you using?
What kind of T1 cable are you using?
What is the distance in cable between the two machines?
MATT---
On 5/31/06, Bruce Reeves <asterisk@nortex-networks.com>
wrote:> I am trying to test out my PRI configuration on a server by conection
> another asterisk server to it. I have the T-1 cards up and both set to
> bchan=1-23 and dchan=24 in zaptel.conf I am getting lost on the signalling
> in zapata.conf . using pri_cpe makes sense for my target box, but I am
> getting the following errors on my source box if I use pri_net or pri_cpe
> signalling.
>
>
> May 31 17:15:06 NOTICE[3790]: chan_zap.c:8202 pri_dchannel: PRI got event:
> HDLC Abort (6) on Primary D-channel of span 1
> May 31 17:15:06 NOTICE[3790]: chan_zap.c:8202 pri_dchannel: PRI got event:
> HDLC Abort (6) on Primary D-channel of span 1
> May 31 17:15:06 NOTICE[3790]: chan_zap.c:8202 pri_dchannel: PRI got event:
> HDLC Bad FCS (8) on Primary D-channel of span 1
>
> I saw a simple drawing on voip-info.org showing 2 boxes connected. Can
> someone tell me what I'm doing wrong?
>
>
> --
> Bruce
> Nortex Networks
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>