I'm trying to connect an Asterisk T1 port to a Dialogic card. The Dialogic side is an external VMS. I setup for ISDN-PRI between systems and have green lights on both card/ports. Zttool shows connection is good also. However, when I try attempt terminate or originate a call to either system, nothing appears of CLI. How can I monitor the "D" channel? zaptel.conf: # Span 8: TE4/1/4 "TE410P (PCI) Card 1 Span 4" ISDN/PRI RED span=8,0,0,esf,b8zs bchan=169-191 dchan=192 zapata.conf: ;---------------------------------------------------- ; Span 8: TE4/0/4 "TE410P (PCI) Card 1 Span 4" ; ; switchtype=national signalling=pri_net ; Dialogic set for CPE ;nsf = megacom pridialplan=unknown echocancel=yes overlapdial=no immediate=no echocancelwhenbridged=yes echotraining=yes rxgain=0.0 callprogress=no group=8 context=from-internal channel => 169-191 Any ideas I could try? Bart -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060511/a56b143b/attachment.htm