I'm trying to install a TE410P this is what happens with compiled zaptel 1.0.9, 1.2-beta and 1.0.9 from http://updates.xorcom.com/iso/ this is my zaptel.conf (checked with the provider the values): span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=it defaultzone=it then I modprobe wct4xxp debug=1 t1e1override=15 and the kernel says : Sep 30 16:12:40 localhost kernel: Zapata Telephony Interface Registered on major 196 Sep 30 16:12:40 localhost kernel: Found TE4XXP at base address df5ffc00, remapped to f8aa2c00 Sep 30 16:12:40 localhost kernel: TE4XXP version c01a0164, burst ON, slip debug: OFF Sep 30 16:12:40 localhost kernel: FALC version: 00000005, Board ID: 00 Sep 30 16:12:40 localhost kernel: Reg 0: 0x17f2f400 Sep 30 16:12:40 localhost kernel: Reg 1: 0x17f2f000 Sep 30 16:12:40 localhost kernel: Reg 2: 0xffffffff Sep 30 16:12:40 localhost kernel: Reg 3: 0x00000000 Sep 30 16:12:40 localhost kernel: Reg 4: 0x00000001 Sep 30 16:12:40 localhost kernel: Reg 5: 0x00000000 Sep 30 16:12:40 localhost kernel: Reg 6: 0xc01a0164 Sep 30 16:12:40 localhost kernel: Reg 7: 0x00001000 Sep 30 16:12:40 localhost kernel: Reg 8: 0x00000000 Sep 30 16:12:40 localhost kernel: Reg 9: 0x00ff0000 Sep 30 16:12:40 localhost kernel: Reg 10: 0x00000000 Sep 30 16:12:40 localhost kernel: TE4XXP: Launching card: 0 Sep 30 16:12:40 localhost kernel: TE4XXP: Setting up global serial parameters Sep 30 16:12:40 localhost kernel: Successfully initialized serial bus for unit 0 Sep 30 16:12:40 localhost kernel: Successfully initialized serial bus for unit 1 Sep 30 16:12:40 localhost kernel: Successfully initialized serial bus for unit 2 Sep 30 16:12:40 localhost kernel: Successfully initialized serial bus for unit 3 Sep 30 16:12:40 localhost kernel: Found a Wildcard: Wildcard TE410P (2nd Gen) so I do /sbin/ztcfg -vvv, which tells me : Zaptel Configuration ===================== SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear channel (Default) (Slaves: 06) Channel 07: Individual Clear channel (Default) (Slaves: 07) Channel 08: Individual Clear channel (Default) (Slaves: 08) Channel 09: Individual Clear channel (Default) (Slaves: 09) Channel 10: Individual Clear channel (Default) (Slaves: 10) Channel 11: Individual Clear channel (Default) (Slaves: 11) Channel 12: Individual Clear channel (Default) (Slaves: 12) Channel 13: Individual Clear channel (Default) (Slaves: 13) Channel 14: Individual Clear channel (Default) (Slaves: 14) Channel 15: Individual Clear channel (Default) (Slaves: 15) Channel 16: D-channel (Default) (Slaves: 16) Channel 17: Individual Clear channel (Default) (Slaves: 17) Channel 18: Individual Clear channel (Default) (Slaves: 18) Channel 19: Individual Clear channel (Default) (Slaves: 19) Channel 20: Individual Clear channel (Default) (Slaves: 20) Channel 21: Individual Clear channel (Default) (Slaves: 21) Channel 22: Individual Clear channel (Default) (Slaves: 22) Channel 23: Individual Clear channel (Default) (Slaves: 23) Channel 24: Individual Clear channel (Default) (Slaves: 24) Channel 25: Individual Clear channel (Default) (Slaves: 25) Channel 26: Individual Clear channel (Default) (Slaves: 26) Channel 27: Individual Clear channel (Default) (Slaves: 27) Channel 28: Individual Clear channel (Default) (Slaves: 28) Channel 29: Individual Clear channel (Default) (Slaves: 29) Channel 30: Individual Clear channel (Default) (Slaves: 30) Channel 31: Individual Clear channel (Default) (Slaves: 31) 31 channels configured. while the kernel logs : Sep 30 16:21:07 localhost kernel: About to enter spanconfig! Sep 30 16:21:07 localhost kernel: TE4XXP: Configuring span 1 Sep 30 16:21:07 localhost kernel: Done with spanconfig! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 1 (TE4/0/1/1) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/1! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 2 (TE4/0/1/2) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/2! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 3 (TE4/0/1/3) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/3! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 4 (TE4/0/1/4) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/4! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 5 (TE4/0/1/5) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/5! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 6 (TE4/0/1/6) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/6! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 7 (TE4/0/1/7) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/7! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 8 (TE4/0/1/8) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/8! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 9 (TE4/0/1/9) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/9! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 10 (TE4/0/1/10) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/10! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 11 (TE4/0/1/11) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/11! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 12 (TE4/0/1/12) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/12! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 13 (TE4/0/1/13) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/13! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 14 (TE4/0/1/14) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/14! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 15 (TE4/0/1/15) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/15! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 16 (TE4/0/1/16) sigtype 896 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/16! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 17 (TE4/0/1/17) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/17! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 18 (TE4/0/1/18) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/18! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 19 (TE4/0/1/19) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/19! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 20 (TE4/0/1/20) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/20! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 21 (TE4/0/1/21) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/21! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 22 (TE4/0/1/22) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/22! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 23 (TE4/0/1/23) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/23! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 24 (TE4/0/1/24) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/24! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 25 (TE4/0/1/25) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/25! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 26 (TE4/0/1/26) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/26! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 27 (TE4/0/1/27) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/27! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 28 (TE4/0/1/28) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/28! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 29 (TE4/0/1/29) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/29! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 30 (TE4/0/1/30) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/30! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 31 (TE4/0/1/31) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/31! Sep 30 16:21:07 localhost kernel: Registered tone zone 11 (Italy) Sep 30 16:21:07 localhost kernel: About to enter startup! Sep 30 16:21:07 localhost kernel: TE4XXP: Span 1 configured for CCS/HDB3/CRC4 Sep 30 16:21:07 localhost kernel: wct4xxp: Setting yellow alarm on span 1 Sep 30 16:21:07 localhost kernel: 2G: Got interrupt, status = 0000000a, GIS = 0080 Sep 30 16:21:07 localhost kernel: TE4XXP: Timing source already set to 4 Sep 30 16:21:07 localhost kernel: SPAN 1: Primary Sync Source Sep 30 16:21:07 localhost kernel: 2G: Got interrupt, status = 0000000a, GIS = 0080 Sep 30 16:21:07 localhost last message repeated 15 times Sep 30 16:21:07 localhost kernel: VPM: Not Present Sep 30 16:21:07 localhost kernel: Completed startup! Sep 30 16:21:07 localhost kernel: 2G: Got interrupt, status = 0000000a, GIS = 0080 Sep 30 16:21:07 localhost kernel: 2G: Got interrupt, status = 0000000a, GIS = 0080 lspci sees the card this way (mhhhhh): 0000:09:04.0 Communication controller: Unknown device d161:0410 (rev 02) and zttool blinks : YEL/RED/REC T4XXP (PCI) Card 0 Span 1 starting asterisk changes a lot 'cause you get much more RED/REC than YEL/RED/REC .... exactly the same configuring all the 4 ports I won't flood you with the logs Some ideas ?
Simone Cittadini
2005-Oct-03 03:29 UTC
[Asterisk-Users] Re: TE410P not working (autoanswer)
Simone Cittadini ha scritto:> I'm trying to install a TE410P this is what happens with compiled > zaptel 1.0.9, 1.2-beta and 1.0.9 from http://updates.xorcom.com/iso/ > > this is my zaptel.conf (checked with the provider the values): > > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15,17-31 > dchan=16 > loadzone=it > defaultzone=it > > then I modprobe wct4xxp debug=1 t1e1override=15 and the kernel says : >> > and zttool blinks : > > YEL/RED/REC T4XXP (PCI) Card 0 Span 1 > > starting asterisk changes a lot 'cause you get much more RED/REC than > YEL/RED/REC .... >Solved putting the digium in another pci slot ...