hi, My question is may be a bit out of scope but I don't know where to turn, I have a 1760 with a ccme 24 user licences 1 bri card. I want to configure a bri card in a cisco 1760 on port 0/0, the card is new, seen by the router, show isdn status gives layer 1 desactived , layer not activated, what ever I do, no shutdown command / shutdown command, etc , the green OK light never turn on, what do i miss, I hope one of you who managed to configure asterisk behing a cisco 1760 could help me , thanks jl -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060216/5f0da69f/attachment.htm
On Thursday 16 Feb 2006 22:20, Jean-Louis curty wrote:> hi, > > My question is may be a bit out of scope but I don't know where to turn, > I have a 1760 with a ccme 24 user licences 1 bri card. > > I want to configure a bri card in a cisco 1760 on port 0/0, > the card is new, seen by the router, show isdn status gives layer 1 > desactived , layer not activated, > > what ever I do, no shutdown command / shutdown command, etc , the green OK > light never turn on, > what do i miss,Assuming that your wires correct, no crossover, plugged in, under the bri interface, try the following command(s) isdn tei-negotiation first-call ~or~ isdn tei-negotiation powerup [...] B -- http://www.mailtrap.org.uk/
Maybe Matching Threads
- sip MWI Messages-Waiting: always reports no messages
- [Possible SPAM] : about sip, asterisk and cisco ccme
- Call Manager Express Peer
- Does Asterisk support T1 E&M Wink/Wink voice channels on any Digium/Sangoma hardware?
- SIP host=dynamic help needed for CCME