Ken,
The zaptel.conf looks good as far as I can tell. The only question I
have is on the Zapata.conf - do you know for sure that the switchtype is
supposed to be national? Just curious. My telco's are all set for
4ess/5ess or dms100.
Second, can you do a "debug pri span 1" from the CLI and see what the
output is? I'm assuming that there's at least *some* communication on
the D-channel since you're able to get inbound calls. I'm just curious
to know what's happening on the D channel when you are dialing out.
-MC
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Ken
D'Ambrosio
Sent: Thursday, February 16, 2006 1:51 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc: lullman@gmail.com
Subject: [Asterisk-Users] "No D-channels available!"
I just tried to go from CAS to PRI on my T1 (Sangoma), and failed pretty
badly. Seemingly everything worked -- Asterisk would see the incoming
call (including CID and DID info), try to route it, and fail -- giving
me a telco (not Asterisk) call failure message. My zapata.conf and
zaptel.conf files are at http://pastebin.com/558349
Below's the log dump.
Note that, because I was simply going from CAS to PRI, I don't believe
the span definition line, itself, should have changed.
If anyone has any ideas, I'd sure be interested...
-- Accepting call from '1234567890' to '1630' on channel 0/1,
span 1
Enabled echo cancellation on channel 1
-- Executing Goto("Zap/1-1", "internal|1630|1") in new stack
-- Goto (internal,1630,1)
-- Executing Dial("Zap/1-1", "SIP/1630|18") in new stack
Setting NAT on RTP to 0
Outgoing Call for 1630
-- Called 1630
(Provisional) Stopping retransmission (but retaining packet) on
'523660ad4664b876746acaf235de5cc7@10.20.1.79' Request 102: Found
-- SIP/1630-9ce0 is ringing
Requested indication 3 on channel Zap/1-1
!! Got reject for frame 0, retransmitting frame 0 now, updating n_r!
!! Got reject for frame 0, retransmitting frame 1 now, updating n_r!
Echo cancellation already on
== Primary D-Channel on span 1 down
No D-channels available! Using Primary channel 24 as D-channel anyway!
== Primary D-Channel on span 1 up
update_call_counter(1630) - decrement call limit counter
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users