asterisk users - Aug 2005 - Does Asterisk support T1 E&M Wink/Wink voice channels on any Digium/Sangoma hardware?

Hi,

Did anyone manage to connect either Digium or Sangoma T1 card to any other
PBX/gateway using T1 E&M Wink/Wink signaling? I'm trying to connect
Avaya
Definity to an Asterisk box with T100P and so far no luck. (I know I can do
so with ISDN PRI, but need an additional ISDN processor card for Definity.)
I tried to connect Definity to Cisco 3640 CCME (call manager express) to
test the link and all settings and it connects just fine with E&M Wink/Wink.
I just wanted to know that it is possible... is it? So far, I found only
this as a guide:

http://www.asteriskguru.com/tutorials/em.html

Thanks a lot, Dmitry.

Yes. It does work. I had it working with a Varion card into an S8700
system with a TN464 DS1 circuit pack sitting in a IP 600 cabinet
earlier this year as a proof of concept.

 Double check that your *ANI*DNIS* settings in the Definity setup
match what you're expecting on the Asterisk side of things and vice
versa.

On 8/16/05, dmitry@axisipsolutions.com <dmitry@axisipsolutions.com>
wrote:
> Hi,
> 
> Did anyone manage to connect either Digium or Sangoma T1 card to any other
> PBX/gateway using T1 E&M Wink/Wink signaling? I'm trying to connect
Avaya
> Definity to an Asterisk box with T100P and so far no luck. (I know I can do
> so with ISDN PRI, but need an additional ISDN processor card for Definity.)
> I tried to connect Definity to Cisco 3640 CCME (call manager express) to
> test the link and all settings and it connects just fine with E&M
Wink/Wink.
> I just wanted to know that it is possible... is it? So far, I found only
> this as a guide:
> 
> http://www.asteriskguru.com/tutorials/em.html
> 
> Thanks a lot, Dmitry.
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>