Displaying 20 results from an estimated 168 matches for "tei".
Did you mean:
mei
2014 Aug 01
1
Connecting Asterisk and BT Versatility PBX via NT BRI port
...roughly a minute once connected. The PBX can be
seen at http://www.telephone-engineer.com/downloads/versatility/versatility-installation.pdf
Putting the pri span in debug mode I can see the following log continuously scrolling
and the PBX never synchronize with the openvox B400P card:
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SA...
2005 Feb 14
1
Bristuff-0.2.0-RC5 florz patched weird error and no outgoing calls?
I applied the florz patch but my problems remain. Now I get all sorts
of weird errors on the console and I cannot make outgoing calls. Incoming
calls work as expected. I am using a single HFC-S card with BRI.
Any clue what these errors below are?
Ri = 44651 TEI msg = 3 TEI = 7f
Ri = 3800 TEI msg = 3 TEI = 7f
Ri = 42399 TEI msg = 3 TEI = 7f
Ri = 42409 TEI msg = 3 TEI = 7f
Ri = 22078 TEI msg = 3 TEI = 7f
Ri = 991 TEI msg = 3 TEI = 7f
Feb 14 10:30:25 NOTICE[14777]: app_dial.c:762 dial_exec: Unable to create
channel of type 'Zap'
Ri = 36942 TEI msg =...
2011 Oct 16
0
PRI E1 call termination issue
...counter settings:
N200: 3
N202: 3
K: 7
T200: 1000
T202: 10000
T203: 10000
T303: 4000
T305: 30000
T308: 4000
T309: 6000
T313: 4000
T-HOLD: 4000
T-RETRIEVE: 4000
T-RESPONSE: 4000
Overlap Recv: No
3. localhost*CLI> *pri set debug on span 1*
Enabled debugging on span 1
TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state
5(Awaiting establishment)
Changing from state 5(Awaiting establishment) to 4(TEI assigned)
TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
TEI=0 Sending SABME
Changing from state 4(TEI assigned) to 5(Awaiting establishment)
TEI=0 Sendi...
2010 Dec 16
1
PTMP BRI Unable to receive TEI from network in state 2(Assign awaiting TEI) - Asterisk 1.6.2, Latest DAHDI, LibPRI
...rom the working one,
moved the card across, ran dahdi_genconf etc and it didn't work.
Here's the console output with notices disabled:
lucas*CLI> pri intense debug span 1
Enabled debugging on span 1
[Dec 16 18:59:46] ERROR[12785]: chan_dahdi.c:12630 dahdi_pri_error:
Unable to receive TEI from network in state 2(Assign awaiting TEI)!
Changing from state 2(Assign awaiting TEI) to 1(TEI unassigned)
[Dec 16 18:59:46] ERROR[12787]: chan_dahdi.c:12630 dahdi_pri_error:
Unable to receive TEI from network in state 2(Assign awaiting TEI)!
[Dec 16 18:59:46] ERROR[12788]: chan_dahdi.c:12630 d...
2004 Dec 19
1
BRI Error with zaphfc
...9; to '------' on channel 0/1, span 1
(my tel no deleted :-)
-- Executing Dial("Zap/1-1", "Zap/g2/673615") in new stack
> [ 02 ff 03 08 01 02 05 04 03 80 90 a3 18 01 89 70 07 c1 36 37 33 36 31 35
> a1 ]
> Unnumbered frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 127 EA: 1
> M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
> 22 bytes of data
> Protocol Discriminator: Q.931 (8) len=22
> Call Ref: len= 1 (reference 2/0x2) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1...
2013 Sep 05
1
MDL-ERROR
I have 2 ISDN BRI boxes, each with 4 spans, where the first one is configured as CPE, the second
one as NET(so I don't need real lines for developing and testing).
Once in a while I do see the following libpri error messages simultaneously on both boxes:
PRI Span: 1 TEI=0 MDL-ERROR (A): Got supervisory frame with F=1 in state 7(Multi-frame established)
PRI Span: 2 TEI=0 MDL-ERROR (A): Got supervisory frame with F=1 in state 7(Multi-frame established)
PRI Span: 2 TEI=0 MDL-ERROR (A): Got supervisory frame with F=1 in state 7(Multi-frame established)
PRI Span: 4 TEI...
2011 Mar 18
7
One PRI card with 2 (or more) Telcos
...el Mapping: 0
Timer and counter settings:
N200: 3
N202: 3
K: 7
T200: 1000
T202: 10000
T203: 10000
T303: 4000
T305: 30000
T308: 4000
T309: 6000
T313: 4000
T-HOLD: 4000
T-RETRIEVE: 4000
T-RESPONSE: 4000
Overlap Recv: No
and
[Mar 18 17:04:05] VERBOSE[19844] chan_dahdi.c: TEI=0 MDL-ERROR (I): T200
expired N200 times sending RR/RNR in state 8(Timer recovery)
[Mar 18 17:04:05] VERBOSE[19844] chan_dahdi.c: TEI=0 Sending SABME
[Mar 18 17:04:05] VERBOSE[19844] chan_dahdi.c: Changing from state 8(Timer
recovery) to 5(Awaiting establishment)
[Mar 18 17:04:06] VERBOSE[19844] ch...
2011 Oct 19
1
Problem E1 PRI
...ode=PSTN
context=pstn-context
signalling=pri_cpe
relaxdtmf=no
pridialplan=unknown
prilocaldialplan=unknown
switchtype=euroisdn
channel=1-15,17-31
------------------------------------------------------------------------------------------------------------------------------
pri intense debug
> TEI: 0 State 4(TEI assigned)
> V(A)=0, V(S)=0, V(R)=0
> K=7, RC=0, l3_initiated=1, reject_except=0, ack_pend=0
> T200_id=8192, N200=3, T203_id=0
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (...
2004 Jul 19
3
Numbering Plan and Siemens EWSD
Hi all,
We're trying to hook up our Asterisk config (Card: TE410P) with a
Siemens EWSD switch. The link is ok on both ends (green), with no errors.
The problem is when we try to make a call from our side (via call
files), we get the pri/E1 error
Ext: 1 Cause: Temporary failure (41), class = Network Congestion (2)
Our Telecom partner (they checked with Siemens) mentioned that we need
to
2004 Jul 13
0
zaphfc TE -> NT problems
...on Zap/5-1
-- Executing Dial("Zap/5-1", "Zap/g1/1901") in new stack
-- Called g1/1901
== D-Channel on span 1 up
== D-Channel on span 1 up
== D-Channel on span 1 up
-- Zap/1-1 is ringing
Jul 13 11:50:15 WARNING[98311]: chan_zap.c:6070 zt_pri_error: PRI:
received TEI check request for TEI = 73
Jul 13 11:50:17 WARNING[98311]: chan_zap.c:6070 zt_pri_error: PRI:
received TEI check request for TEI = 73
== D-Channel on span 1 up
== D-Channel on span 1 up
== D-Channel on span 1 up
-- Zap/1-1 answered Zap/5-1
-- Attempting native bridge of Zap/5-1 and Za...
2004 Mar 31
5
3-4 port FXO card recommendations
*This message was transferred with a trial version of CommuniGate(tm) Pro*
In setting up Asterisk, I'm looking to dump my current phone system (Nortel
Venture). I presently have three POTS lines.
I would use a VOIP provider, but now are presently available in the Toronto, ON,
CANADA area that support user owned hardware/software. I need a 416/647 area
code number.
In looking at FXO cards
2005 Jan 20
1
Weird Zaphfc - not dialling non-local numbers
...y can help, I will be eternally grateful.
Thanks,
John
*** Log ***
voip*CLI>
-- Executing Dial("Zap/1-1", "Zap/g2/228") in new stack
-- Called g2/228
-- Accepting call from '224' to '521' on channel 0/1, span 1
-- Zap/4-1 is ringing
received TEI check request for TEI = 127
received TEI check request for TEI = 127
-- Channel 0/1, span 1 got hangup < -- I hung up
Jan 20 16:17:26 WARNING[4613]: app_dial.c:369 wait_for_answer: Unable to
forward frame
-- Hungup 'Zap/4-1'
== Spawn extension (from-isdn, 521, 1) exited no...
2011 Jun 07
2
PRI issue its BUSY
Hi all,
I just configures my PRI and incoming calls are working fine but outside calling giving error PRI is BUSY :( any idea ? I have same setup on other box and that boxes works perfect.
-- DAHDI/i1/6463279153-2 is proceeding passing it to SIP/7328-00000002
-- DAHDI/i1/6463279153-2 is making progress passing it to SIP/7328-00000002
-- DAHDI/i1/6463279153-2 is busy
-- Hungup
2010 Jun 21
1
DAHDI: Inbound BRI call, DDI not presented
...connected to BT, and I have specified "euroisdn" as
the switch type.
many thanks
---------------------------------------------------------------------------------------------
(snippet during inbound call to "336027")
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 008 P/F: 1
< 0 bytes of data
-- ACKing all packets from 8 to (but not including) 8
-- Stopping T200 timer
-- Starting T203 timer
Handling message for SAPI/TEI=0/0
TEI: 0 State 7
V(S) 8 V(A) 8 V(R) 8
K 1, RC 0, l3ini...
2004 Apr 23
3
Problem With zaphfc
I've this error
How i can find the problem?
Apr 23 12:24:43 WARNING[131081]: PRI: received TEI check request for TEI = 89
Apr 23 12:24:47 WARNING[131081]: PRI: received TEI check request for TEI = 89
Apr 23 12:24:48 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1
Apr 23 12:24:53 WARNING[131081]: PRI: received TEI check request for TEI = 89
Apr 23 12:25:02 WARNING[131081]: PRI: rece...
2003 Aug 25
1
I4L CallerID not working
...ut area code
I turned on the maximum isdn debugging, and here is the output when I dial
in, at this time, asterisk was not running...
29:42.76 Card1 tiger: i1 2 80
29:42.76 Card1 ISAC interrupt 80
29:42.76 Card1 isac_empty_fifo cnt 4 02 81 01 3B
29:42.76 Card1 <- PH_DATA: RR[1](nr 29)C (sapi 0, tei 64)
HEX: 02 81 01 3B
29:42.76 frame network->user SFrame with tei 64
29:42.78 Card1 tiger: i1 2 80
29:42.78 Card1 ISAC interrupt 80
29:42.78 Card1 isac_empty_fifo cnt 4 00 81 01 3B
29:42.78 Card1 <- PH_DATA: RR[1](nr 29)R (sapi 0, tei 64)
HEX: 00 81 01 3B
29:42.78 frame network->user SFram...
2005 Jun 08
1
EuroISDN Italy - quadbri - zaptel.conf - what settings work ?
...s,ami
span=7,0,3,ccs,ami
span=8,0,3,ccs,ami
bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12
bchan=13,14
dchan=15
bchan=16,17
dchan=18
bchan=19,20
dchan=21
bchan=22,23
dchan=24
I get this on bri intense debug...
> Unnumbered frame:
> SAPI: 63 C/R: 0 EA: 0
> TEI: 127 EA: 1
> M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
> 5 bytes of data
Sending TEI Request ri=64864
> [ fc ff 03 0f fd 60 01 ff ]
> Unnumbered frame:
> SAPI: 63 C/R: 0 EA: 0
> TEI: 127 EA: 1
> M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbere...
2009 Oct 25
1
some issue with libpri cant go past 1.4.1
...an ERROR call. I basically call into my system, selection
option 2 which then calls out
to my cell phone.
What is the issue with 1.4.10.2? Thanks, (note I tried the same thing
with other libpri versions).
Jerry
This is the error log:
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 044 P/F: 0
> 0 bytes of data
-- Restarting T203 timer
q931.c:2816 q931_call_proceeding: call 4 on channel 23 enters state 9 (Incoming Call Proceeding)
-- Finally transmitting 40, since window opened up (0)
> [ 0...
2007 Jun 06
3
1.4 Zaptel/Sangoma Issues on CentOS
...lled.
When I fire up asterisk, I keep getting "Primary D-Channel on span 1 up"
repeated over and over. The B channels never come up. There are no
errors in any of the logs, zttool, or the wanpipe tools.
Intense pri debug output:
< Unnumbered frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode
extended
) ]
< 0 bytes of data
-- Got SABME from network peer.
Sending Unnumbered Acknowledgement
> [ 02 01 73 ]
> Unnumbered frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
>...
2016 Mar 25
2
PRI error "ROSE REJECT"
PRI debug of the entire call would be great, also, switchtype would be
awesome as well.
Thanks!
Matthew Fredrickson
On Thu, Mar 24, 2016 at 4:07 PM, Carlos Rojas <crt.rojas at gmail.com> wrote:
> Hi
>
> Did you activate the pri debug on the cli asterisk?
>
> On Thu, Mar 24, 2016 at 12:59 PM, Carlos Chavez <cursor at telecomabmex.com>
> wrote:
>>
>>