search for: ccme

...t figure out how to get it working with host=dynamic, even locally on a test setup (to avoid NAT complications, etc...) Here's the local static one, which works fine: sip.conf: ---------- [general] context=default allowguest=no allowoverlap=no bindport=5060 bindaddr=0.0.0.0 srvlookup=yes ; [ccme-inbound] type=friend host=10.5.7.130 qualify=yes context=from-ccme allow=all insecure=port,invite canreinvite=no ; [ccme-outbound] type=friend host=10.5.7.130 qualify=yes context=from-ccme trustrpid=yes sendrpid=yes allow=all canreinvite=no dtmfmode=rfc2833 And, in CME: ----------------- dial-peer...

...----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Andrea Riela Sent: Wednesday, March 16, 2005 5:26 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Possible SPAM] :[Asterisk-Users] about sip, asterisk and cisco ccme -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi folks, I would create a structure like this: external sip server \ external sip server |-----| Asterisk |------| Cisco CME |-------| ip phones | external sip server / I would use Asterisk as SIP client for some SIP accounts on external server...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi folks, I would create a structure like this: external sip server \ external sip server |-----| Asterisk |------| Cisco CME |-------| ip phones | external sip server / I would use Asterisk as SIP client for some SIP accounts on external servers ... then register those via H323 (if possible; skynny?) on Cisco CME ... Then I would use Asterisk

Hi, I'm having trouble getting asterisk to report MWI to a Cisco CCME. I record a message in mailbox 29, but the subsequent MWI notifications I see continue to report no messages waiting. Are they reporting for the wrong mailbox? Is there some other option I have to set or change? I'm running asterisk-1.4.22 Since the mailbox is in [home] in voicemail.conf, I&...

I have the following configuration and am obviously missing something small that is causing * not to work as expected. I have the following defined in sip.conf [ccme-in] type=peer host=10.0.9.1 context=devel_in disallow=all allow=alaw nat=no canreinvite=yes qualify=yes and [devel_in] is defined in extentions.conf However when I try to call via the dial peer I have configured on the cisco (below) I get : Feb 22 18:37:40 NOTICE[31486]: pbx.c:1318 pbx_extensio...

thanks to everyone offering sussgestions and pointers in answer to my questions about SME VoiP/* in the UK; i'll update you on my progress as and when this ends up as an implemented * solution (and i totally take on board the recommendation to look at 2nd hand CCME -- i should have said at the start that i've just co-ordinated an NBX install for a much larger project and that part of my current investigations is simply to see at what point * is more appropriate (in terms of cost, effort, reliability, flexibility) than NBX/CCME et al. Not intending to...

...ma T1 card to any other PBX/gateway using T1 E&M Wink/Wink signaling? I'm trying to connect Avaya Definity to an Asterisk box with T100P and so far no luck. (I know I can do so with ISDN PRI, but need an additional ISDN processor card for Definity.) I tried to connect Definity to Cisco 3640 CCME (call manager express) to test the link and all settings and it connects just fine with E&M Wink/Wink. I just wanted to know that it is possible... is it? So far, I found only this as a guide: http://www.asteriskguru.com/tutorials/em.html Thanks a lot, Dmitry.

hi, My question is may be a bit out of scope but I don't know where to turn, I have a 1760 with a ccme 24 user licences 1 bri card. I want to configure a bri card in a cisco 1760 on port 0/0, the card is new, seen by the router, show isdn status gives layer 1 desactived , layer not activated, what ever I do, no shutdown command / shutdown command, etc , the green OK light never turn on, what do i...

hi: Just starting out with *, and I'm planning to heed the advice to start simple and small, but the goal i'm aiming for eventually is: *-based pbx for 10-20 seat small business, based in the UK. Users will have PoE SIP hardphones. So far so good, but two questions, both UK-specific, relating to connection to the outside world (PSTN or VoIP): - are there any UK-based VoIP providers

I've got a question regarding Cisco IP Phones and licencing. When using a third party PBX like asterisk is a licence required for the Cisco phones ? Has anyone got anything in writing from Cisco to clarify this ? Eg can I just use CP-7961G or do I need CP-7961G-CH1 even though I'm not using Cisco Callmanager ? HYPERLINK

I have a smartnet contract for this phone, and have searched high and low for this file on the Cisco website. I need: United_States/7960-tones.xml English_United_States/7960-font.xml Every road seems to lead to the Call manager express downloads... I don't have a CME, so that's basically useles. Can anyone point me in the right direction? Mikel

At the moment, we have a feature where if someone's sip extension is called, we also make another call to their mobile. We use the "c" option in the zap dialstring so that the user has to press "#" after answering to confirm the call (this prevents things like the answermachine grabbing the call if the mobile is switched off). We are now looking to move towards a sip

...PBX/gateway using T1 E&M Wink/Wink signaling? I'm trying to > connect Avaya Definity to an Asterisk box with T100P and so far no > luck. (I know I can do so with ISDN PRI, but need an additional ISDN > processor card for Definity.) I tried to connect Definity to Cisco > 3640 CCME (call manager express) to test the link and all settings and > it connects just fine with E&M Wink/Wink. I just wanted to know that > it is possible... is it? So far, I found only this as a guide: > > http://www.asteriskguru.com/tutorials/em.html > > Thanks a lot, Dmitry....

Hi there, In Cisco web site http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet09186a008008884a.html It says that regardless of the technology used you have to buy a licencse. Does the license apply to use the phone with asterisk, or, can i just buy the phone? Also, the phone does not requiere to use an AC adapter if used with PoE injectors/switches. Can non-Cisco PoE