I just changed the from DSL to Shaw Cable (static IP) configure the firewall but now asterisk I can not register with FWD nor VoipJet calls going out. I am using IAX with FWD Did I missed to change a setting? I don't think there is any though. I am on shaw extreme connection; I just talked shaw tech. and they are not blocking any port - I was told. So why IAX will not register with FWD and calls to VoipJet are not getting connected. -- #Joseph
On Sat, 2005-06-18 at 14:16 -0600, Joseph wrote:> I just changed the from DSL to Shaw Cable (static IP) configure the > firewall but now asterisk I can not register with FWD nor VoipJet calls > going out. > > I am using IAX with FWD > Did I missed to change a setting? I don't think there is any though. > > I am on shaw extreme connection; I just talked shaw tech. and they are > not blocking any port - I was told. > So why IAX will not register with FWD and calls to VoipJet are not > getting connected.I've boot my asterisk backup server to ADSL and everything is working FWD, VoipJet. Short story: The only thing I've done differently is I've spoofed MAC address on the firewall on an external port - eth0 to get the same IP address from Shaw, but I don't see how that could make a difference. Long Story: Shaw has those new Cable Modem - Motorola SURFboard SB5100 that once configured to an IP address with one firewall it will retain that MAC address of that first firewall for about 4-hours. When I first experimented that Cable Modem I've connected my backup firewall and the Modem retained that MAC address. So in order to connect the second firewall and get the same IP address, I need to spoof the MAC address of the first firewall or wait 4-hours. So I went with the second solution but I don't see how that could make a difference, the only way to tell is to wait 4-hours to remove the spoof MAC address from the firewall. -- #Joseph
John Cianfarani
2005-Jun-18 15:30 UTC
[Asterisk-Users] IAX with shaw cable not going through
Rogers does the same thing all you need to do is a DHCP release (or the equivalent in your FW). I had similar issues (not asterisk related) since I have a pix fw and it has no option to do a dhcp release. John -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Joseph Sent: Saturday, June 18, 2005 5:19 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] IAX with shaw cable not going through On Sat, 2005-06-18 at 14:16 -0600, Joseph wrote:> I just changed the from DSL to Shaw Cable (static IP) configure the > firewall but now asterisk I can not register with FWD nor VoipJetcalls> going out. > > I am using IAX with FWD > Did I missed to change a setting? I don't think there is any though. > > I am on shaw extreme connection; I just talked shaw tech. and they are > not blocking any port - I was told. > So why IAX will not register with FWD and calls to VoipJet are not > getting connected.I've boot my asterisk backup server to ADSL and everything is working FWD, VoipJet. Short story: The only thing I've done differently is I've spoofed MAC address on the firewall on an external port - eth0 to get the same IP address from Shaw, but I don't see how that could make a difference. Long Story: Shaw has those new Cable Modem - Motorola SURFboard SB5100 that once configured to an IP address with one firewall it will retain that MAC address of that first firewall for about 4-hours. When I first experimented that Cable Modem I've connected my backup firewall and the Modem retained that MAC address. So in order to connect the second firewall and get the same IP address, I need to spoof the MAC address of the first firewall or wait 4-hours. So I went with the second solution but I don't see how that could make a difference, the only way to tell is to wait 4-hours to remove the spoof MAC address from the firewall. -- #Joseph _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Colin Anderson
2005-Jun-20 07:14 UTC
[Asterisk-Users] IAX with shaw cable not going through
Hi Joseph, did you try iaxping? http://www.bpvn.com/asterisk/iaxping.zip Invaluable for IAX troubleshooting. hth -----Original Message----- From: Joseph [mailto:syscon@interbaun.com] Sent: Saturday, June 18, 2005 2:16 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] IAX with shaw cable not going through I just changed the from DSL to Shaw Cable (static IP) configure the firewall but now asterisk I can not register with FWD nor VoipJet calls going out. I am using IAX with FWD Did I missed to change a setting? I don't think there is any though. I am on shaw extreme connection; I just talked shaw tech. and they are not blocking any port - I was told. So why IAX will not register with FWD and calls to VoipJet are not getting connected. -- #Joseph _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Colin Anderson
2005-Jun-20 07:17 UTC
[Asterisk-Users] IAX with shaw cable not going through
I have "fooled" the SurfBoard on Shaw with the MAC address issue by resetting it 3 times sucessively, then it will accept a new MAC address immediately. hth. -----Original Message----- From: Joseph [mailto:syscon@interbaun.com] Sent: Saturday, June 18, 2005 3:19 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] IAX with shaw cable not going through On Sat, 2005-06-18 at 14:16 -0600, Joseph wrote:> I just changed the from DSL to Shaw Cable (static IP) configure the > firewall but now asterisk I can not register with FWD nor VoipJet calls > going out. > > I am using IAX with FWD > Did I missed to change a setting? I don't think there is any though. > > I am on shaw extreme connection; I just talked shaw tech. and they are > not blocking any port - I was told. > So why IAX will not register with FWD and calls to VoipJet are not > getting connected.I've boot my asterisk backup server to ADSL and everything is working FWD, VoipJet. Short story: The only thing I've done differently is I've spoofed MAC address on the firewall on an external port - eth0 to get the same IP address from Shaw, but I don't see how that could make a difference. Long Story: Shaw has those new Cable Modem - Motorola SURFboard SB5100 that once configured to an IP address with one firewall it will retain that MAC address of that first firewall for about 4-hours. When I first experimented that Cable Modem I've connected my backup firewall and the Modem retained that MAC address. So in order to connect the second firewall and get the same IP address, I need to spoof the MAC address of the first firewall or wait 4-hours. So I went with the second solution but I don't see how that could make a difference, the only way to tell is to wait 4-hours to remove the spoof MAC address from the firewall. -- #Joseph _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users