I have a setup for a 30 incoming channels with telcel. The incoming is
R2, they told me the outgoing is MF not R2. If the other channels are
fxo, you should change your zaptel.conf so you can use zapata.conf
and comment out those channels on unicall.conf.
ia
On 5/20/05, Andres Maduro <andres@iconos.com.ve>
wrote:> Hi,
>
> I am trying to configure * 1.0.7 box with a Digium Wildcard TE110P T1/E1
and libunicall latest code.
>
> All libs compiled successfully and the E1 have a green light!
>
> I am able to receive a call (or at least) testcall shows some information
when an incoming call is received so the drivers and basic configuration is
working.
>
> My * box has 2 cards, one TDM400B (2 fxs and 2 fxo) and one TE110P E1/T1.
I have loaded in the followin order the kernel modules:
>
> 1. zaptel
> 2. wcte11xp
> 3. wcfxs
>
> The E1 is configured as this: the first 15 channels are for incoming calls
using MFC/R2 Venezuela protocol, the last 15 channels are configured as a normal
analog line, you pick up the channel and hear dial tone, you then only need to
send dtmf to place a call (how I configure this channels ??), I guess with fxo
loop start in the E1 channel ??
>
> The problem I have is that I can't bring up asterisk, when I try, I
receive the following error on the logs about being unable to load chan_zap:
>
> May 20 12:01:05 ERROR[13693]: Signalling requested is FXO Kewlstart but
line is in R2 Signalling signalling
> May 20 12:01:05 ERROR[13693]: Unable to register channel '1'
> May 20 12:01:05 WARNING[13693]: chan_zap.so: load_module failed, returning
-1
> May 20 12:01:05 WARNING[13693]: Loading module chan_zap.so failed!
>
> I am including zaptel.conf, zapata.conf and unicall.conf to see if you can
help me.
>
> zttool shows both cards in an OK status.
>
> ---------------------- zaptel.conf start ------------------------------
> # Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0"
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> cas=17-31:1101
>
>
> # Span 2: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
> fxoks=32
> fxoks=33
> fxsks=34
> fxsks=35
>
> # Global data
>
> loadzone = us
> defaultzone = us
>
> ----------------------- zaptel.conf end -------------------------------
>
> ----------------------- zapata.conf start -------------------------------
> ;
> ; Zapata telephony interface
> ;
> ; Configuration file
>
> [trunkgroups]
>
> [channels]
>
> language=en
> context=from-pstn
> rxwink=300 ; Atlas seems to use long (250ms) winks
> ;
> ; Whether or not to do distinctive ring detection on FXO lines
> ;
> ;usedistinctiveringdetection=yes
>
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=800
> rxgain=0.0
> txgain=0.0
> group=0
> callgroup=1
> pickupgroup=1
> immediate=no
>
> ;faxdetect=both
> faxdetect=incoming
> ;faxdetect=outgoing
> ;faxdetect=no
>
> ;Include AMP configs
> #include zapata_additional.conf
>
> ;Include genzaptelconf configs
> #include zapata-auto.conf
>
> ; (extensiones)
> signalling = fxo_ls
> channel => 32-33
> signalling = fxs_ls
> channel => 34-35
>
>
> ----------------------- zapata.conf end -------------------------------
>
> ----------------------- unicall.conf start -------------------------------
> ;
> ; Unicall telephony channel driver
> ;
> ; Sample configuration file
> ;
> [channels]
> ;
> ; Default language
> ;
> ;language=en
> ;
> ; Default context
> ;
> context=default
> ;
> ; Whether or not to use caller ID
> ;
> usecallerid=yes
> ;
> ; Whether or not to hide outgoing caller ID
> ;
> hidecallerid=no
> ;
> ; Whether or not restrict outgoing caller ID (will be sent as ANI only, not
available for the user)
> ; Mostly use with FXS ports
> ;
> ;restrictcid=no
> ;
> ; Support Caller*ID on Call Waiting
> ;
> callwaitingcallerid=yes
> ;
> ; Support three-way calling
> ;
> threewaycalling=yes
> ;
> ; Support flash-hook call transfer (requires three way calling)
> ;
> transfer=yes
> ;
> ; Support call forward variable
> ;
> cancallforward=yes
> ;
> ; Whether or not to support Call Return (*69)
> ;
> callreturn=yes
> ;
> ; Enable echo cancellation
> ; Use either "yes", "no", or a power of two from 32 to
256 if you wish
> ; to actually set the number of taps of cancellation.
> ;
> echocancel=yes
> ;
> ; Generally, it is not necessary (and in fact undesirable) to echo cancel
> ; when the circuit path is entirely TDM. You may, however, reverse this
> ; behavior by enabling the echo cancel during pure TDM bridging below.
> ;
> echocancelwhenbridged=yes
> ;
> ; In some cases, the echo canceller doesn't train quickly enough and
there
> ; is echo at the beginning of the call. Enabling echo training will cause
> ; asterisk to briefly mute the channel, send an impulse, and use the
impulse
> ; response to pre-train the echo canceller so it can start out with a much
> ; closer idea of the actual echo. Value may be "yes",
"no", or a number of
> ; milliseconds to delay before training (default = 400)
> ;
> ;echotraining=yes
> ;echotraining=800
> ;
> ; If you are having trouble with DTMF detection, you can relax the
> ; DTMF detection parameters. Relaxing them may make the DTMF detector
> ; more likely to have "talkoff" where DTMF is detected when it
> ; shouldn't be.
> ;
> ;relaxdtmf=yes
> ;
> ; You may also set the default receive and transmit gains (in dB)
> ;
> rxgain=0.0
> txgain=0.0
> ;
> ; Logical groups can be assigned to allow outgoing rollover. Groups
> ; range from 0 to 31, and multiple groups can be specified.
> ;
> group=1
> ;
> ; Ring groups (a.k.a. call groups) and pickup groups. If a phone is
ringing
> ; and it is a member of a group which is one of your pickup groups, then
> ; you can answer it by picking up and dialing *8#. For simple offices,
just
> ; make these both the same
> ;
> callgroup=1
> pickupgroup=1
> ;
> ; Specify whether the channel should be answered immediately or
> ; if the simple switch should provide dialtone, read digits, etc.
> ;
> immediate=no
> ;
> ; CallerID can be set to "asreceived" or a specific number
> ; if you want to override it. Note that "asreceived" only
> ; applies to trunk interfaces.
> ;
> ;callerid=2564286000
> ;
> ; AMA flags affects the recording of Call Detail Records. If specified
> ; it may be 'default', 'omit', 'billing', or
'documentation'.
> ;
> ;amaflags=default
> ;
> ; Channels may be associated with an account code to ease
> ; billing
> ;
> ;accountcode=lss0101
> ;
> ; For fax detection, uncomment one of the following lines. The default is
*OFF*
> ;
> ;faxdetect=both
> ;faxdetect=incoming
> ;faxdetect=outgoing
> ;faxdetect=no
> ;
> ; Select which class of music to use for music on hold. If not specified
> ; then the default will be used.
> ;
> ;musiconhold=default
> ;
> ; The outgoing ports on the E1 are not MFC/R2!!!, they have dial tone and
expect DTMF dialing, does this work ?
> protocolclass=fx
> protocolvariant=ls,hk
> protocolend=co
> group = 3
> channel => 17-31
>
> loglevel=255
> ; The first 15 channels are signaled using MFC/R2 Venezuela
> protocolclass=mfcr2
> protocolvariant=cl,20,7
> protocolend=co
> group = 1
> channel => 1-15
>
> ----------------------- unicall.conf end -------------------------------
>
> Any help is greatly appreciated.
>
> Regards.
> Andres Maduro
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>