search for: te110p

Hello Everyone, I checked with zttool that sometimes after the machine boots the order of the boards is changed like this: ??? Alarms Span ??? OK Digium Wildcard TE110P T1/E1 Card 0 ??? OK Digium Wildcard TE110P T1/E1 Card 1 ??? OK Wildcard TDM400P REV I Board 1 and sometimes: ??? Alarms Span...

Does anyone know if you can have multiple TE110P cards in one chassis? -Thermal -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061011/adbceeb5/attachment.htm

I have an Asterisk server that was running fine until Sunday. Monday there was a power outage and the server was off most of the day. This server has a TE110P, two TDM04B and an Astribank 32. Today I noticed that the TE110P started having IRQ missess. Before today it only had about two or three per month. Today, this is the miss count after ten minutes on: IRQ Misses: 1443 I can see the number climbing when using zttool. Users are...

Hi! I'm trying to setup a Wildcard TE110P with a PRI in The Netherlands. I get a Red Alarm on the line. Is there any way of debugging this? I've tried some configs that should work but without success. Is there any way of telling if the cabling is correct or what else the problem could be? Thanks!! Remco

please can someone send to me his files like zaptel & zapta if he si using TE110P thank you

I am having a problem with a couple servers. They both have a Digium TE110P and a TDM04B card. I have setup the system so the TE110P uses channels 1-31 and the TDM04B 32-35. The problem is that when we reboot the server sometimes the TDM04B is recognized first and the TE110P second so the configuration fails. I do not know why this happens and to solve this I have...

Hi, thank you for last info. we've tried to use te110p but failed. We're quite surprised that cable wasn't included with the card as any documentation, at least on HW setup and installation, yet cable pinout for connection to PRI interfaces.... 1. We have followed instructions on your site and from Beronet guide, but card just keeps blinki...

...roduce hangups callwaitingcallerid=yes ; show callerid on callwaitingcalls echotraining=no echocancel=no echocancelwhenbridged=no overlapdial=yes immediate=no callerid=asreceived language=de rxgain=0.0 txgain=0.0 group=1 signalling=pri_cpe context=pri1 channel => 1-15,17-31 I am connecting my TE110P with a Balun converter where the two BNC connectors are from connected to a Fibre optic line. When I reboot my pc , I got my TE110P LED flashing RED slowly. But nothing happen when I hooked up to Balun Convertor. Balun convertor is 75ohm on BNC and 120ohm on RJ45. I am using straight through c...

I have a Digicom TE110p card installed in our exchange. I have compiled and installed libpri, zaptel and recompiled and installed asterisk. I have configured udev as I am running Fedora Core 3. The problem that I have is that when zaptel is not running everything works fine. However when I start zaptel (service start zap...

Hi folks, I've already searched the mailing list but no one else seems to have my same problem. I'm using Asterisk with the following configuration: Fedora Core 4 (but I also tried Fedora 3) 1 Digium TE110P 1 TDM40B 1 HFC-S 'Cologne' bristuff 0.2.0-RC8o (zaptel 1.0.9.2) I compiled right, I can load kernel modules but when I try to unload wcte11xp module (the one for TE110P card) I get a kernel panic: Kernel panic - not syncing: /usr/src/bristuff-0.2.0-RC8o/zaptel-1.0.9.2/wcte11xp.c...

...l framework: [ OK ] Waiting for zap to come online...OK Loading zaptel hardware modules:Running ztcfg: ZT_CHANCONFIG failed on channel 25: No such device or address (6) [FAILED] [root@asterisk etc]# dmesg TE110P: Setting up global serial parameters for T1 FALC V1.2 TE110P: Successfully initialized serial bus for card Found a Wildcard: Digium Wildcard TE110P T1/E1 [root@asterisk etc]# ztcfg -v Zaptel Configuration ====================== SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) 31 channels...

Hi everybody, i need someone to tell me the spins numbers of Rx+,Rx-,Tx+ and Tx- of TE110P and also if you can tell me have to made a cable like that?? Modem Teleco <-----------Self Crosscable------------>Asterisk Rx+ <--------------------------------------------------------------> Tx+ Rx- <--------------------------------------------------------------> Tx-...

...n. The problem he is experiencing is that the span stays in red alarm after it is configured and connected to the PRI. We attempted to test the card by configuring for loopback and inserting a loopback plug into the span, but the red alarm persisted. My conclusion was and is that the customer's TE110P is faulty. > > As noted in the case description and by the customer himself, I recommended that he have his card RMA'd if it is still under warranty (which, if I understand correctly, would result in him receiving a TE120P due to the TE110P being past end-of-life). > > With that cle...

...re in the process of installing a PRI line and we are going to connect it to an Asterisk Box. Verizon called us today to find out some information. I am surprised that they have never heard of Asterisk or Digium. But anyways, they needed some information in order to set up the circuit. Does the TE110P support NI1 or NI2? (I think the answer is both) What is the number of digits outpulsed? Is there a version number on the TE110P card? Thank you in advanced to anyone who might be able to answer these questions for me. I tried to explain to Verizon that it would work and that the system is f...

i get this message with a red signal on TE110P card: ***************** TE110P: span configured for... Calling startuo (flug is 4099) wcte1xxp: Setting yellow alarm ***************** what does mean ? thank you :)

hi eveybody, after many test with your help and the irc channels help, i get the led on TE110P green with this config: span=1,1,0,ccs,ami =====> alarms OK Green Led but the provider say that i have to set my span to this span=1,1,0,ccs,hdb3,crc4 =====> alarms: YEL/RED i can't make call's yet to test because they have to sync the Modulator in the other side so any remark? i...

...lo Everyone, I checked with zttool that sometimes after the machine boots the order of the boards is changed like this: > ??? Alarms Span ??? OK Digium Wildcard TE110P T1/E1 Card 0 ??? OK Digium Wildcard TE110P T1/E1 Card 1 ??? OK Wildcard TDM400P REV I Board 1 > and sometimes: > ??? Alarms Span...

Hello all, Has anyone use the Supermicro PDSME+ in combination with the TE110P successfully? My experience so far is not very good. I am running trixbox 2.0 but: 1) with zttool I am getting IRQ Misses. Don't seem to have IRQ conflict, but I am now running my SATA HD in DMA. And I am not able to set it in DMA(HIO... operation not permitted) 2) With zttool the Alarm is...

Hi, I was going to order the T100P but it is replaced by TE110P. On further reading the TE110P does not need an external router (The one that separates the data from pstn lines ?). Has anyone got it configured? And on the wiki it says that the drivers for some distros don't exist yet. Is redhat supported? And if I need to connect a fax machine will the FX...

Good day all We got a Wildcard TE110P I installed linux,zaptel,libpti and asterisk I coped over my zaptel.conf and zapata.conf from a previous E100P config But when I try to start asterisk it gives error not bying able to load zap channles: == Parsing '/etc/asterisk/zapata.conf': Found Jan 10 08:17:18 WARNING[-1084595552]: ch...