asterisk users - May 2005 - Re: Asterisk-Users Digest, Vol 10, Issue 114

Hello All
 
 
Any body used sangoma card A101. I have problem with this card. My system are:
Linux Redhat 8.0. asterisk 1.07 and libpri, zaptel,...
i connected E1 and MF/R2 signalling.
 
i configure HDLC and TDM Voice. this is my configure as belows:
#===============================================# WANPIPE1 Configuration File
#===============================================#
# Date: Sun May 15 03:11:45 GMT+7 2005
#
# Note: This file was generated automatically
#       by /usr/sbin/wancfg program.
#
#       If you want to edit this file, it is
#       recommended that you use wancfg program
#       to do so.
#===============================================# Sangoma Technologies Inc.
#===============================================[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE  = AFT
S514CPU  = A
CommPort  = PRI
AUTO_PCISLOT  = YES
PCISLOT  = 1
PCIBUS   = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE  = 1
TE_CLOCK  = NORMAL
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = NO
INTERFACE = V35
CLOCKING = EXTERNAL
BaudRate  = 2048
MTU   = 2048
UDPPORT  = 9000
TTL  = 255
IGNORE_FRONT_END = NO
[w1g1]
PROTOCOL = HDLC
HDLC_STREAMING = NO
ACTIVE_CH = ALL
IDLE_FLAG = 0x7E
MTU  = 2048
MRU  = 2048
TDMV_SPAN = 1
TDMV_ECHO_OFF = NO
MULTICAST = NO
TRUE_ENCODING_TYPE = NO 
 
 
when i start sangoma card (wanrouter start). the system run overload (CPU = 100)
and i unplug cable, i view logfile, i see: DMA descriptor length error ...
i ask sangoma support, but don't received any supoported.
 
 
please send to me good configure file run for E1.
 
 
I see on terminal of ACATEL. I type
Ctrl A
CTIN: <enter>
AFCT = 195-13-1<31; <enter>
terminal show all channel is BLOF or BLOJ (depending on cable)
i need LIBR
 
thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050515/0dbbbbb5/attachment.htm