Displaying 19 results from an estimated 19 matches for "active_ch".
Did you mean:
active_cic
2005 Sep 27
4
BAD echo problems with Sangoma and Telstra
...wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 0
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = NO
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = YES
##EOF
2007 Dec 02
1
setting up two asterisk server as ss7 back to back.
...FE_LINE = 1
TE_CLOCK = MASTER
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 120OH
TE_SIG_MODE = CCS
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
# zaptel.conf
loadzone=uk
defaultzone=uk
span=1,1,0,ccs,hdb3
bchan=1-31
### ss7.conf
[linkset-ennie]
enabled => yes
use_connect => yes
enable_st => no
hunting_policy => odd_lru
subservice => auto
context = default
[link-l1...
2005 May 15
0
Re: Asterisk-Users Digest, Vol 10, Issue 114
...=============================
[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = YES
PCISLOT = 1
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = NO
INTERFACE = V35
CLOCKING = EXTERNAL
BaudRate = 2048
MTU = 2048
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
[w1g1]
PROTOCOL = HDLC
HDLC_STREAMING = NO
ACTIVE_CH = ALL
IDLE_FLAG = 0x7E
MTU = 2048
MRU = 2048
TDMV_SPAN = 1
TDMV_ECHO_OFF = NO
MULTICAST = NO
TRUE_ENC...
2006 Nov 16
1
Sangoma A101 gives 'no PRI configured on span 1' error
I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and
installation was successful. zttool, ztcfg, all show card is installed
properly. I copied the parameters from my old working zaptel.conf,
zapata.conf and zapata-auto.conf. Verified on Sangoma website that these
files are correct. Also configured wanpipe1.conf.
But doing all this didn't start the PRI channels. It says
2008 Oct 06
2
Conneting Asterisk to Swyx pri
...E_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
TDMV_HW_DTMF = NO
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
wanpipe3 and 4:
[devices]
wanpipe3 = WAN_AFT_TE1, Comment
[interfaces]
w3g1 = wanpipe3, , TDM_VOICE, Comment
[wanpipe3]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 1
PCIBUS...
2009 Apr 17
1
Sangoma A104d and Adtran 850 problems
...DE = B8ZS
FE_FRAME = ESF
FE_LINE = 3
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 7
TDMV_DCHAN = 0
TDMV_HW_DTMF = YES
[w7g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
Here is /etc/dahdi/system.conf
loadzone=us
defaultzone=us
#Sangoma A104 port 3 [slot:4 bus:9 span:7] <wanpipe7>
span=7,0,0,esf,b8zs
fxols=145-164
fxsls=165-168
Here is /etc/asterisk/chan_dahdi.conf:
[trunkgroups]
[channels]
context=def...
2007 Jan 03
2
Sangoma A102 w/ EC module gets intermittent echo /audio artifacts
...= PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 1
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
wanpipe2.conf:
[devices]
wanpipe2 = WAN_AFT_TE1, Comment
[interfaces]
w2g1 = wanpipe2, , TDM_VOICE, Comment
[wanpipe2]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 1
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF...
2005 May 27
0
Re: Asterisk-Users Digest, Vol 10, Issue 215
...=============================
[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = YES
PCISLOT = 2
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = YES
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
I start wanrouter, the card connected success, monitor on E10 exchange (ACATEL), the status of all channels are LIBR.
when i dial to...
2007 Jul 26
1
Asterisk 1.2.23 and Sangoma a102 no incoming calldetected
...FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
thanks for your help.
--
------------------------------------------------------------
Erick Perez
------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation Provi...
2006 Apr 07
1
Inbound PRI calls drop after 5 seconds using Sangoma A101
...[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 5
PCIBUS = 2
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 1
TE_CLOCK = NORMAL
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = NO
LBO = 0DB
INTERFACE = V35
CLOCKING = EXTERNAL
BaudRate = 0
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
[w1g1]
PROTOCOL = HDLC
HDLC_STREAMING = YES
ACTIVE_CH = ALL
ID...
2005 Sep 05
0
Re: Asterisk-Users Digest, Vol 14, Issue 22
...==========
[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = YES
PCISLOT = 2
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = YES
FE_TXTRISTATE = NO
MTU = 2100
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
and my setting /etc/zaptel.conf
#
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, z...
2007 Jul 26
1
Asterisk 1.2.23 and Sangoma a102 no incoming call detected
...FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
thanks for your help.
--
------------------------------------------------------------
Erick Perez
------------------------------------------------------------
2007 Jul 03
1
Distinctive ring detection not detecting ring cadences
...= AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 6
PCIBUS = 1
FE_MEDIA = FXO/FXS
TDMV_LAW = MULAW
TDMV_OPERMODE = FCC
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = NO
2010 Apr 01
2
Problem with Sangoma A104 and euroisdn pri
...SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
TDMV_HW_DTMF = NO
TDMV_HW_FAX_DETECT = NO
[w1g1]
ACTIVE_CH = ALL
TDMV_HWEC = NO
==end wanpipe1.conf ====================
==begin zapata.conf ====================
[trunkgroups]
[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
c...
2006 Mar 11
1
FW: I need to set NO CRC4 on zaptel.conf?
..._FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
goksie
2014 Aug 01
1
load testing and pattern testing sangoma A116 card
...T = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
TDMV_HW_DTMF = NO # YES: receive dtmf events from hardware
TDMV_HW_FAX_DETECT = NO # YES: receive fax 1100hz
events from hardware
[w1g1]
ACTIVE_CH = ALL
TDMV_HWEC = YES
MTU = 8
/etc/dahdi/system.conf:
defaultzone=be
loadzone=be
span=1,1,0,ccs,hdb3
dchan=16
bchan=1-15,17-31
echocanceller=mg2,1-15,17-31
span=2,2,0,ccs,hdb3
dchan=47
bchan=32-46,48-62
echocanceller=mg2,32-46,48-62
span=3,3,0,ccs,hdb3
dchan=78
bchan=63-...
2006 Dec 20
5
Sangoma A101 with Unicall
...FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 120OH
TE_SIG_MODE = CAS
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = NO
Basically I only get channels 1 to 15 active in Asterisk. I am using
wanpipe-2.3.4-3 with Zaptel 1.2.12 for this configuration and Asterisk
1.2.14.
--
Telecomunicaciones Abiertas de Mexico S.A. de C.V.
Carlos Ch?vez Prats
Director de Tecno...
2009 Apr 06
3
Sangoma and BT single lines
Hi, got a Sangoma A200 with a bunch of extension cards and having real
problems getting it to deal with a normal single BT line
Symptoms are that incoming calls are fine. Outgoing calls ring the far
end, BUT asterisk never sees that the call is answered (ie no message in
the logs files saying so), as a result the remove end can hear the PBX
side talking, but there is no audio back from the