Displaying 4 results from an estimated 4 matches for "true_encoding_type".
2005 May 15
0
Re: Asterisk-Users Digest, Vol 10, Issue 114
...CTIVE_CH = ALL
TE_HIGHIMPEDANCE = NO
INTERFACE = V35
CLOCKING = EXTERNAL
BaudRate = 2048
MTU = 2048
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
[w1g1]
PROTOCOL = HDLC
HDLC_STREAMING = NO
ACTIVE_CH = ALL
IDLE_FLAG = 0x7E
MTU = 2048
MRU = 2048
TDMV_SPAN = 1
TDMV_ECHO_OFF = NO
MULTICAST = NO
TRUE_ENCODING_TYPE = NO
when i start sangoma card (wanrouter start). the system run overload (CPU = 100) and i unplug cable, i view logfile, i see: DMA descriptor length error ...
i ask sangoma support, but don't received any supoported.
please send to me good configure file run for E1.
I see on term...
2006 Nov 16
1
Sangoma A101 gives 'no PRI configured on span 1' error
I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and
installation was successful. zttool, ztcfg, all show card is installed
properly. I copied the parameters from my old working zaptel.conf,
zapata.conf and zapata-auto.conf. Verified on Sangoma website that these
files are correct. Also configured wanpipe1.conf.
But doing all this didn't start the PRI channels. It says
2006 Apr 07
1
Inbound PRI calls drop after 5 seconds using Sangoma A101
...= 0
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
[w1g1]
PROTOCOL = HDLC
HDLC_STREAMING = YES
ACTIVE_CH = ALL
IDLE_FLAG = 0x7E
MTU = 1500
MRU = 1500
TDMV_SPAN = 1
TDMV_ECHO_OFF = NO
MULTICAST = NO
TRUE_ENCODING_TYPE = NO
asterisk1*CLI> pri show span 1
asterisk1*CLI>
Primary D-channel: 24
Status: Provisioned, Up, Active
Switchtype: National ISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4...