search for: hdlc_streaming

...AUTO_PCISLOT = YES PCISLOT = 1 PCIBUS = 1 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL ACTIVE_CH = ALL TE_HIGHIMPEDANCE = NO INTERFACE = V35 CLOCKING = EXTERNAL BaudRate = 2048 MTU = 2048 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO [w1g1] PROTOCOL = HDLC HDLC_STREAMING = NO ACTIVE_CH = ALL IDLE_FLAG = 0x7E MTU = 2048 MRU = 2048 TDMV_SPAN = 1 TDMV_ECHO_OFF = NO MULTICAST = NO TRUE_ENCODING_TYPE = NO when i start sangoma card (wanrouter start). the system run overload (CPU = 100) and i unplug cable, i view logfile, i see: DMA descriptor length error ... i as...

I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and installation was successful. zttool, ztcfg, all show card is installed properly. I copied the parameters from my old working zaptel.conf, zapata.conf and zapata-auto.conf. Verified on Sangoma website that these files are correct. Also configured wanpipe1.conf. But doing all this didn't start the PRI channels. It says

...= 1 TE_CLOCK = NORMAL ACTIVE_CH = ALL TE_HIGHIMPEDANCE = NO LBO = 0DB INTERFACE = V35 CLOCKING = EXTERNAL BaudRate = 0 MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO [w1g1] PROTOCOL = HDLC HDLC_STREAMING = YES ACTIVE_CH = ALL IDLE_FLAG = 0x7E MTU = 1500 MRU = 1500 TDMV_SPAN = 1 TDMV_ECHO_OFF = NO MULTICAST = NO TRUE_ENCODING_TYPE = NO asterisk1*CLI> pri show span 1 asterisk1*CLI> Primary D-channel: 24 Status: Provisioned, Up, Active Swi...

[This email is either empty or too large to be displayed at this time]