Is it possible to run NETHDLC and PRI signaling on the same 4 port T405P
card?
This is what I get when I try to start asterisk:
== Parsing '/etc/asterisk/zapata.conf': Found
Mar 24 10:48:53 ERROR[2368]: chan_zap.c:9435 setup_zap: Unknown signalling
method 'pri_cpe'
Mar 24 10:48:53 WARNING[2368]: chan_zap.c:9614 setup_zap: Ignoring
switchtype
Mar 24 10:48:53 WARNING[2368]: chan_zap.c:9614 setup_zap: Ignoring
pridialplan
Mar 24 10:48:53 ERROR[2368]: chan_zap.c:9077 setup_zap: Signalling must be
specified before any channels are.
Mar 24 10:48:53 WARNING[2368]: loader.c:345 ast_load_resource: chan_zap.so:
load_module failed, returning -1
== Unregistered channel type 'Tor'
== Unregistered channel type 'Zap'
Mar 24 10:48:53 WARNING[2368]: loader.c:440 load_modules: Loading module
chan_zap.so failed!
My zapata.conf
[channels]
echocancel=yes
echotraining=yes
musiconhold=default
signalling=pri_cpe
switchtype=national
pridialplan=unknown
group=1
relaxdtmf=yes
channel => 1-23
My zaptel.conf
span=1,1,0,esf,b8zs
span=1,2,0,esf,b8zs
bchan=1-23
dchan=24
nethdlc=25-48
loadzone = us
defaultzone=us
Any help would be much appreciated.
Chris.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050324/e40b8b06/attachment.htm
