asterisk users - Jan 2005 - Having trouble with T405P and PPP: ZT_SPANCONFIG failed

Hello!

I am trying to set up multi-link PPP using two T100P cards in one
machine, and 1 T405P card (the 4-port one) in another machine.  I have
previously been able to get PPP working between the two T100P cards
in separate machines....

The 4-port card seems to be my problem currently.  I am trying to use the tor2
driver (from a fresh CVS download this morning).  When I load the driver (or run
ztcfg)
I get this error:

ZT_SPANCONFIG failed on span 1:  No such device or address (6)

I assume it is a configuration issue on my part, but I don't see
what I'm doing wrong.

ztcfg -vvv gives:

Zaptel Configuration
=====================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01 02 03 04 05 06 07 08 09 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24)
Channel 25: Clear channel (Default) (Slaves: 25 26 27 28 29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45 46 47 48)

48 channels configured.


Please let me know if you have any ideas!

Thanks,
Ben

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com

On Fri, 2005-01-14 at 14:38 -0800, Ben Greear wrote:
> Hello!
> 
> I am trying to set up multi-link PPP using two T100P cards in one
> machine, and 1 T405P card (the 4-port one) in another machine.  I have
> previously been able to get PPP working between the two T100P cards
> in separate machines....
> 
> The 4-port card seems to be my problem currently.  I am trying to use the
tor2
> driver (from a fresh CVS download this morning).  When I load the driver
(or run ztcfg)
> I get this error:
Start with the wct4xxp driver instead... That should get you closer ...

Regards,
Adam

-- 
 -- 
Adam Goryachev
Website Managers
Ph:  +61 2 9345 4395                        adam@websitemanagers.com.au
Fax: +61 2 9345 4396                        www.websitemanagers.com.au