search for: t405p

Hello! I am trying to set up multi-link PPP using two T100P cards in one machine, and 1 T405P card (the 4-port one) in another machine. I have previously been able to get PPP working between the two T100P cards in separate machines.... The 4-port card seems to be my problem currently. I am trying to use the tor2 driver (from a fresh CVS download this morning). When I load the driver (or...

SYNOPSIS Erratic red alarm T1 PRI on asterisk, but zttool running concurrently during alarm shows no errors, irq misses, or alarms, on any span. Using asterisk and quad Digium T405P, configured as follows: Span 1 connects to ISDN PRI (fractional 8 B channels, D channel 24). Span 2 connects to T1 Mux and analog stations. Span 3 connects to ISDN PRI Nortel BCM hybrid key system digital trunk. Span 4 is not configured. Host system is Athlon > 1.8GHz, 512MB running Gentoo Lin...

All, I know the question has been asked before, but any of the solutions posted in the past have not solved my problem. I have got a Asterisk setup using a P4 1.8 / 512mb server running Redhat Enterprise 3 and 3 grandstream budgetone phones (plus a couple of xten clients on windows) and I'm at advanced stage of testing to see if asterisk will fill our needs as a PBX using voice over IP

...rying to do is get our analog PBX (A Merlin Legend) connected to VoIP. From all my googling and reading voip-info.org (and this list) it seems very possible. I just wanted to describe my setup and see if I'm going in the right direction. What I'd like to do is set up an asterisk box with a T405P Quad-Span T1 Card. I am planning to drop all voice lines and switch to a full data T1. Span 1 would be pure data (PPP encapsulation) coming from the Telco. Span 2 would be all voice channels, going into an CAC Adit 600 Channel Bank with 3 FXS cards and from there into the PBX. I would really like...

...who wants to hang up or leave the conference should press the # key, after which they get a "goodbye" message and the call gets disconnected. However, this does not happen. whatever keys are pressed by whichever party gets heard on every other party. I am using Zap channels (Digium T405p) My extensions.conf looks like this [macro-meetme] exten => s,1,Answer exten => s,2,Wait(1) exten => s,3,MeetMe(${ARG1}|pMAx) exten => s,4,Playback(vm-goodbye) exten => s,5,Hangup [conference] exten => 1300,1,Macro(meetme,1300) The "p" option should take...

Is it possible to run NETHDLC and PRI signaling on the same 4 port T405P card? This is what I get when I try to start asterisk: == Parsing '/etc/asterisk/zapata.conf': Found Mar 24 10:48:53 ERROR[2368]: chan_zap.c:9435 setup_zap: Unknown signalling method 'pri_cpe' Mar 24 10:48:53 WARNING[2368]: chan_zap.c:9614 setup_zap: Ignoring switchtype...

...right after an ioctl. Unicall verion 0.0.3pre4 doesn't even have the Makefile patch, which I had to modify by hand. Before giving the details, I would like to hear from you whom have got this to work and, specially, the versions of the libraries and asterisk used. Accordingly with zttool, the T405P card is recognizing the E1 connection and working properly, the issue is with asterisk. Thanks in advance. -- Arnaldo M. Pereira egghunt at gmail dot com http://ansi-c.org/~arnaldo

I've got a Dual Xeon system Digium Quad T1 and an Idle T1 circuit that I can experiment with. I've been wanting to use Redhat with software Raid 1 on an Asterisk server. Has anyone had any experience with software raid and Asterisk? Also, if the software raid doesn't play, any recommendations for a hardware based IDE Raid controller and suggestions on best practices for setting up

i cannot see caller ID of the call originated from outside zap channel. i hv configured both zapata.conf and extensions.conf. i m right now in india i think asterisk only supports Bellcore enable caller ID. so is it the same bug of BT caller ID problem in UK? or it is the bug of my asterisk configuration? i hv enabled callerID from my TELCO. -------------- next part -------------- An HTML