asterisk users - Sep 2004 - Cisco Downloads --> was --> Re: Cisco 7960 andAsterisk...not working...

can you please share the cdw part # for the $ 10 service contract ?



W. Kevin Hunt

CCIE #11841
MCSE, Linux+ SME
www.huntbrothers.com
  
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com 
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of 
> Christopher Jacob
> Sent: Saturday, September 25, 2004 9:51 PM
> To: asterisk-users@lists.digium.com
> Subject: Cisco Downloads --> was --> Re: [Asterisk-Users] 
> Cisco 7960 andAsterisk...not working...
> 
> I just had to deal with this yesterday. I called Cisco and 
> they gave me a part number for the support contract. I looked 
> around and it was $90... I posted back to this list and was 
> happy when someone gave me the correct part number, which at 
> CDW was $10... Not too bad.
> 
> Although I can't believe Cisco waists time with $10 service 
> contracts. At that point just make the damn thing free.
> 
> Anyway, I don't have the email in front of me but google the 
> list from yesterday (Friday) and I'm sure you will come across it.
> 
> ~c
> 
> Message: 10
> Date: Sat, 25 Sep 2004 18:45:44 +0000
> From: C Wegrzyn <lists@garbagedump.com>
> Subject: Re: [Asterisk-Users] Cisco 7960 and Asterisk...not working...
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> 	<asterisk-users@lists.digium.com>
> Message-ID: <4155BCD8.8000107@garbagedump.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> 
> Is there a place to get the software load for the Cisco phone 
> without having a support contract? Buying the phone was 
> costly enough, but now needing to pay for the software to 
> "fix" it is really poor!
> 
> Chuck Wegrzyn
> 
> Chad Brown wrote:
> 
> >Chuck,
> >
> >The first thing I would do is to upgrade the load to version 6 or 
> >higher. I'm running the latest...version 7.2. (I'm very 
> happy with it)
> >
> >Are you using TFTP to load the configuration or manually configuring 
> >the 7960? I know it's a pain to setup TFTP just for a quick test. 
> >However, it's well worth it. If you have a CCO account you 
> can find the 
> >latest load and config files here:
> >http://www.cisco.com/cgi-bin/tablebuild.pl/sip-ip-phone7960
> >
> >After getting the infrastructure in place the following link 
> was all I 
> >needed to get my 7960 phones working properly:
> >http://www.voip-info.org/wiki-Asterisk%20phone%20cisco%2079xx
> >
> >However, the 7960 does have some basic error logging. I'm 
> not sitting 
> >in front of it right now so I can't tell you the key combinations.
> >
> >Hint: I went from version 3.2 like you to 7.2. However, as 
> an interim 
> >step I had to go to 6.0 first.
> >
> >Thanks,
> >
> >Chad
> >
> >-----Original Message-----
> >From: asterisk-users-bounces@lists.digium.com
> >[mailto:asterisk-users-bounces@lists.digium.com] On Behalf 
> Of C Wegrzyn
> >Sent: Saturday, September 25, 2004 11:03 AM
> >To: Asterisk Users Mailing List - Non-Commercial Discussion
> >Subject: [Asterisk-Users] Cisco 7960 and Asterisk...not working...
> >
> >Hi! I have Asterisk up and running and have KPhone, IAXtel and FWD 
> >connected to it and working. I have a Cisco 7960 with version 3 (App.
> >Load ID POS3-2-00) software. I have configured the 7960 correctly, I 
> >think;
> >
> >I have set everything - name, shortname, auth.name and 
> display name set 
> >to 200.
> >I have set the password to 200.
> >I've set the proxy address/port to 192.168.1.117/5060.
> >
> >I can't seem to get the phone to connect to Asterisk, though Kphone
> >works fine. Does anyone have an idea of what I am doing wrong?
> >
> >TIA,
> >Chuck Wegrzyn
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users@lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users@lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> >  
> >
> **********************************************
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>

Here is the link to CDW it is $9.14.  
Cisco Part Number CON-SNT-CP7960
CDW Part Number 672205 
http://www.cdw.com/shop/products/default.aspx?EDC=672205


-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of W. Kevin Hunt
Sent: Monday, September 27, 2004 10:41 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: Cisco Downloads --> was --> Re: [Asterisk-Users] Cisco
7960andAsterisk...not working...

can you please share the cdw part # for the $ 10 service contract ?



W. Kevin Hunt

CCIE #11841
MCSE, Linux+ SME
www.huntbrothers.com
  
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com 
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of 
> Christopher Jacob
> Sent: Saturday, September 25, 2004 9:51 PM
> To: asterisk-users@lists.digium.com
> Subject: Cisco Downloads --> was --> Re: [Asterisk-Users] 
> Cisco 7960 andAsterisk...not working...
> 
> I just had to deal with this yesterday. I called Cisco and 
> they gave me a part number for the support contract. I looked 
> around and it was $90... I posted back to this list and was 
> happy when someone gave me the correct part number, which at 
> CDW was $10... Not too bad.
> 
> Although I can't believe Cisco waists time with $10 service 
> contracts. At that point just make the damn thing free.
> 
> Anyway, I don't have the email in front of me but google the 
> list from yesterday (Friday) and I'm sure you will come across it.
> 
> ~c
> 
> Message: 10
> Date: Sat, 25 Sep 2004 18:45:44 +0000
> From: C Wegrzyn <lists@garbagedump.com>
> Subject: Re: [Asterisk-Users] Cisco 7960 and Asterisk...not working...
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> 	<asterisk-users@lists.digium.com>
> Message-ID: <4155BCD8.8000107@garbagedump.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> 
> Is there a place to get the software load for the Cisco phone 
> without having a support contract? Buying the phone was 
> costly enough, but now needing to pay for the software to 
> "fix" it is really poor!
> 
> Chuck Wegrzyn
> 
> Chad Brown wrote:
> 
> >Chuck,
> >
> >The first thing I would do is to upgrade the load to version 6 or 
> >higher. I'm running the latest...version 7.2. (I'm very 
> happy with it)
> >
> >Are you using TFTP to load the configuration or manually configuring 
> >the 7960? I know it's a pain to setup TFTP just for a quick test. 
> >However, it's well worth it. If you have a CCO account you 
> can find the 
> >latest load and config files here:
> >http://www.cisco.com/cgi-bin/tablebuild.pl/sip-ip-phone7960
> >
> >After getting the infrastructure in place the following link 
> was all I 
> >needed to get my 7960 phones working properly:
> >http://www.voip-info.org/wiki-Asterisk%20phone%20cisco%2079xx
> >
> >However, the 7960 does have some basic error logging. I'm 
> not sitting 
> >in front of it right now so I can't tell you the key combinations.
> >
> >Hint: I went from version 3.2 like you to 7.2. However, as 
> an interim 
> >step I had to go to 6.0 first.
> >
> >Thanks,
> >
> >Chad
> >
> >-----Original Message-----
> >From: asterisk-users-bounces@lists.digium.com
> >[mailto:asterisk-users-bounces@lists.digium.com] On Behalf 
> Of C Wegrzyn
> >Sent: Saturday, September 25, 2004 11:03 AM
> >To: Asterisk Users Mailing List - Non-Commercial Discussion
> >Subject: [Asterisk-Users] Cisco 7960 and Asterisk...not working...
> >
> >Hi! I have Asterisk up and running and have KPhone, IAXtel and FWD 
> >connected to it and working. I have a Cisco 7960 with version 3 (App.
> >Load ID POS3-2-00) software. I have configured the 7960 correctly, I 
> >think;
> >
> >I have set everything - name, shortname, auth.name and 
> display name set 
> >to 200.
> >I have set the password to 200.
> >I've set the proxy address/port to 192.168.1.117/5060.
> >
> >I can't seem to get the phone to connect to Asterisk, though Kphone
> >works fine. Does anyone have an idea of what I am doing wrong?
> >
> >TIA,
> >Chuck Wegrzyn
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users@lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users@lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> >  
> >
> **********************************************
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users