similar to: Cisco Downloads --> was --> Re: Cisco 7960 andAsterisk...not working...

I just had to deal with this yesterday. I called Cisco and they gave me a part number for the support contract. I looked around and it was $90... I posted back to this list and was happy when someone gave me the correct part number, which at CDW was $10... Not too bad. Although I can't believe Cisco waists time with $10 service contracts. At that point just make the damn thing free. Anyway,

Chuck, The first thing I would do is to upgrade the load to version 6 or higher. I'm running the latest...version 7.2. (I'm very happy with it) Are you using TFTP to load the configuration or manually configuring the 7960? I know it's a pain to setup TFTP just for a quick test. However, it's well worth it. If you have a CCO account you can find the latest load and config files

> I too contacted CDW about the $9.37 Cisco support > contract. But because I did not buy my phone from them I was > not allowed to purchase it. The vendor I bought the phone > from does not provide them. What are the "magic words" to > get CDW to sell it to you? With all of this hassle I highly > doubt that I will buy more Cisco phones anyway. After >

The CDW part number is: 672205 And the cisco part number is: CON-SNT-CP7960 Hope this helps... In fact I think I will add it to the Wiki. ~c ------------------------------ Message: 11 Date: Mon, 27 Sep 2004 10:40:38 -0500 From: "W. Kevin Hunt" <Kevin@hbcorporate.com> Subject: RE: Cisco Downloads --> was --> Re: [Asterisk-Users] Cisco 7960 andAsterisk...not working... To:

Hi all (is a bit of a Cisco question, but perhaps it's already been asked here). I'm trying to setup a TFTP server for dynamic configuration of my 7960 Cisco phones. Cisco docs suggest I download the following files from their web site: * OS79XX.TXT * SIPDefaultGeneric.cnf * SIPConfigGeneric.cnf * RINGLIST.DAT * P0S3xxyy.bin * P0S3-xx-y-zz.bin * dialplan.xml * syncinfo.xml I only

Hi, I have followed the thread on where to get a maintenance contract so that I can upgrade the firmware to a SIP version and have called two different places, CDW and Insight. Neither place will sell the contact, all I get is a B.S. excuse to why they can't. Has anyone had luck with a more friendly place or do they have the images? TIA, Trevor

Just in case anyone here hadn't noticed, Cisco is apparently making 7940/7960 SIP 8.2 firmware freely downloadable by anyone: http://www.cisco.com/pcgi-bin/tablebuild.pl/sip-ip-phone7960 username: anonymous password: your email address -- Alexander Burke, A+, CCNA Kingston, Ontario, Canada

I have several Cisco 79xx phones (7905, 7920, 7940, 7960, 7970, ATA 186) and I need to buy firmware for them. I have contacted http://www.cdw.com and http://www.insight.com/ but they didn't respond. Can anybody tell me where can I buy SCCP and SIP firmware for my phones? BTW, I'm in Croatia (Hrvatska). I heard that location does matter. P.S. My local Cisco reseller wants to sell me

Hi all, Happy Wednesday! Got a 7940G off eBay to tinker with and, per the wiki, contacted Cisco about a service contract. Being just little ol' me, they won't deal directly and blew me off (I hate dealing with Cisco, Nortel, etc as a small-business person...) Again per the wiki, I hit CDW.com and found CON-SNT-CP7960 for $9.14. Looking for support for the 7940 (not 7960), I just

I have a second-hand 7960 which I am attempting to upgrade to use a SIP image. The phone currently has a firmware release which doesn't seem to be listed in Cisco docs - P003AM30. On reboot, it finds the tftp server and requests the firmware image listed in OX79XX.txt correctly, displaying "Upgrading Software" on the screen. It then continues to re-request the same image from the

Tip side open on the analog line? Have you taken a butt set or normal phone and attached it directly to the outside line to see if you get dial tone? > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of > Jon Gabrielson > Sent: Friday, January 28, 2005 11:09 PM > To: Asterisk Users

Hello, I have two broadvoice accounts. Lately, very often my broadvoice accounts are in unregistered state. When I log into asterisk I see: voip*CLI> sip show registry Host Username Refresh State sip.broadvoice.com:5060 yyy@s 120 Request Sent sip.broadvoice.com:5060 xxx@s 120 Request Sent xxx and yyy are my ohone numbers, when I do tcpdump on my router, I see only packets comming out my

Fyi... My apologies if this is a dupe. -----Original Message----- From: Cisco Technical Support [mailto:vtg_subscription_tool_owner@cisco.com] Sent: Wednesday, December 13, 2006 8:52 AM To: Tim Connolly Subject: New Software available on Cisco.com New software images are available on Cisco.com for the product families that you have selected. If you would like to change your subscription, or

Aloha, Has anyone written an XML application for a Ciso 7960 phone running SIP? I can't find any examples anywhere! Anyone know of any resources for this? I have read it can render XML & can get input from the keypad & softkeys. Aloha, Matt

I'm in the process of setting up a test/demonstration system to show that VoIP is realistic and applicable for our needs. We put a 7905 and 7960 on a request for quote that went out the other day (to people like CDW & Microwarehouse). All of the vendors returned thier quotes without including the Cisco phones. So my question: where do you buy your phones? We can't buy direct from

I just tried to order the CON-SNT-CP7960 part from CDW. This is the ~$8 1yr support contract that's supposed to give access to the Cisco download site for firmware for the 7960 . wellll, I got a call from CDW saying that Cisco wouldn't authorize them to sell that product to me. The sales rep conferenced me in with the CDW Cisco person and he explained that CON-SNT-CP7960 is an

Hello, I am sorry that I post questios regarding Broadvoice here, but unfortunalelly their support is very very bad. The simply do not answer to any emails or telephones. Last week something happened to their system. I was not able to receive incommming calls etc. Now it is back, but the voice quality is terribe and the DTMF is not working.(Is the inbound mode the correct one?) Does anybody knows

Thanks everyone for your feedback, especially Mark. I now have the ALL the files I need. My order still stands for the $8.00 product from CISCO but the CP7960 dealer sent me all the files. Now I will move on to completeing the setup of the TFTP server. Thanks again -----Original Message----- From: Michael Loftis [mailto:mloftis@wgops.com] Sent: Friday, February 18, 2005 7:51 PM To:

Hi, Matt: What?s your server specifications that did you use? Best Regards, Cleviton. -----Mensagem original----- De: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]Em nome de Matt Florell Enviada em: sexta-feira, 23 de junho de 2006 11:38 Para: Asterisk Users Mailing List - Non-Commercial Discussion Assunto: Re: [Asterisk-Users] Meetme max users

I've just recieved a copy of the new SIP firmware for the Cisco 7970, those of you with Cisco accounts may wish to try it (shock horror I'm sticking with SCCP). This coincides with the release of v8 firmware for all Cisco phones (and for those of you running Sergio's chan_sccp v8 works fine) The firmware is now also (and for the 7970 SIP, only) distributed in ".cop" files,