Hello,
I have teh same problem with:
QuadBRI -> * -> TDM400 -> Modem
Thanks in advance for your help.
Regards,
Pedro
-----Mensaje original-----
De: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com]En nombre de Carl Sempla
Enviado el: jueves, 23 de septiembre de 2004 3:56
Para: asterisk-users@lists.digium.com
Asunto: [Asterisk-Users] TDM400 synch issue
Hello,
I have the following configuration :
E100P -> * -> TDM400 -> Modem
When I receive FAXes, about 20% of them are corrupted : pages are not always
complete. If the fax is complex or with numerous pages, it's usually a mess.
Before that, I was using spandsp with success. Unfortunately it's too picky
with some broken fax (training failed).
Since this failure only occurs with the same set of faxes and it's
reproducible, I'm confident about my E100P configuration.
That's why I suspect frame slips on the TDM400 side.
How can I solve this issue ?
It's a dual p3, highly idle without IRQ sharing :
20: 602869735 602487558 IO-APIC-level wctdm
21: 602485799 602863515 IO-APIC-level t1xxp
zaptel.conf :
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
fxoks=32-35
zapata.conf :
[channels]
faxdetect=incoming
context=default
switchtype=euroisdn
signalling=fxo_ls
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=no
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
signalling=pri_cpe
context=incoming
channel => 1-15,17-31
signalling=fxo_ks
context=internal
channel => 32-33
Thanks,
--
Carl
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users