search for: t1xxp

Excuse my ignorance here, but I am desperately trying to isolate the IRQ for my TE110P card (shown below as t1xxp) Ive gone into my bios and disabled all usb , parallel, serial and some other devices, those that I needed to keep, I have moved off of IRQ 10 and onto IRQ 5, but everytime I boot up, I get usb-uhci and ehci_hcd using IRQ 10 as well as my Digium card. Does anybody know what these are and how I can...

...(master=WCT1/0/1) HDLC Receiver overrun on channel WCT1/0/1 (master=WCT1/0/1) HDLC Receiver overrun on channel WCT1/0/1 (master=WCT1/0/1) HDLC Receiver overrun on channel WCT1/0/1 (master=WCT1/0/1) --snip-- My initial though was interrupts, the LAN was connected via eth0, which is sharing with the t1xxp card running the WAN link. (The t4xxp card is for a future project and is idle) but I downed eth0 and switched the LAN to eth1. /proc/interrupts: CPU0 0: 140133158 XT-PIC timer 1: 125 XT-PIC keyboard 2: 0 XT-PIC cascade 9: 1571...

...6334299 IO-APIC-edge timer 1: 14390 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 8: 3 IO-APIC-edge rtc 14: 2 IO-APIC-edge ide0 15: 505440 IO-APIC-edge ide1 21: 150019 IO-APIC-level eth1 22: 63326503 IO-APIC-level t1xxp -- lspci -bv | grep IRQ Flags: bus master, medium devsel, latency 0, IRQ 11 Flags: bus master, medium devsel, latency 0, IRQ 10 (USB) Flags: bus master, fast devsel, latency 0, IRQ 255 Flags: bus master, medium devsel, latency 0, IRQ 7 Flags: medium devsel, IRQ 5...

...ri2 context exten=>_X.,1,Dial(Zap/g1/${EXTEN}||j) exten=>_X.,2,Congestion() exten=>_X.,102,Busy() cat /proc/interrupts CPU0 0: 1114420235 XT-PIC timer 1: 8 XT-PIC i8042 2: 0 XT-PIC cascade 5: 1114083499 XT-PIC t1xxp 8: 1 XT-PIC rtc 9: 0 XT-PIC acpi 10: 2531734 XT-PIC eth0 12: 1114121836 XT-PIC t1xxp 14: 306435 XT-PIC ide0 NMI: 0 lspci -v 00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645 Host & Memory &a...

...e timer 1: 337 IO-APIC-edge i8042 7: 0 IO-APIC-edge parport0 8: 1 IO-APIC-edge rtc 9: 2 IO-APIC-level acpi 14: 1217453 IO-APIC-edge ide0 16: 0 IO-APIC-level uhci_hcd, uhci_hcd 17: 510391706 IO-APIC-level Intel ICH5, t1xxp 18: 14143151 IO-APIC-level uhci_hcd, libata, eth0 19: 510477191 IO-APIC-level uhci_hcd, wctdm 22: 510396103 IO-APIC-level t1xxp NMI: 0 LOC: 510532759 ERR: 0 MIS: 0 I am thinking to replace the two T1 cards by a new TE205P Thanks in advance for any comm...

...reproducible, I'm confident about my E100P configuration. That's why I suspect frame slips on the TDM400 side. How can I solve this issue ? It's a dual p3, highly idle without IRQ sharing : 20: 602869735 602487558 IO-APIC-level wctdm 21: 602485799 602863515 IO-APIC-level t1xxp zaptel.conf : span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 fxoks=32-35 zapata.conf : [channels] faxdetect=incoming context=default switchtype=euroisdn signalling=fxo_ls usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=ye...

...CPU0 0: 240869 XT-PIC timer 1: 4 XT-PIC keyboard 2: 0 XT-PIC cascade 3: 7719 XT-PIC megaraid 4: 30 XT-PIC aic7xxx 5: 79 XT-PIC aic7xxx 7: 2322440 XT-PIC t1xxp 8: 1 XT-PIC rtc 10: 5909 XT-PIC eth0 11: 0 XT-PIC ide2 12: 13 XT-PIC PS/2 Mouse NMI: 0 ERR: 14 Any body have any thoughts on what that error message means...? Thanks, -gcc

...ge ide1 16: 0 0 0 0 IO-APIC-level usb-uhci 18: 0 0 0 0 IO-APIC-level usb-uhci 19: 0 0 0 0 IO-APIC-level usb-uhci 24: 1433575 0 0 0 IO-APIC-level t1xxp 28: 7387 0 0 0 IO-APIC-level aic7xxx 29: 15 0 0 0 IO-APIC-level aic7xxx 31: 4810 0 0 0 IO-APIC-level eth0 48: 65 0 0 0 IO-APIC-level DIVA 4BRI 6261...

...de0 16: 0 0 IO-APIC-level usb-uhci 18: 0 0 IO-APIC-level usb-uhci 19: 0 0 IO-APIC-level usb-uhci 23: 0 24 IO-APIC-level ehci-hcd 29: 33133540 32846566 IO-APIC-level t1xxp 38: 72500 83317 IO-APIC-level megaraid 58: 32838989 33150525 IO-APIC-level wctdm 72: 222855 12 IO-APIC-level eth0 NMI: 1 0 LOC: 6601462 6601460 ERR: 0 MIS: 0...

...IO-APIC-level acpi 28: 177705 0 0 0 IO-APIC-level eth0 29: 9282 0 0 0 IO-APIC-level eth1 72: 35845 0 0 0 IO-APIC-level dpti0 100: 102 0 0 0 IO-APIC-level t1xxp 104: 18342391 0 0 0 IO-APIC-level t4xxp lsmod: Module Size Used by wct1xxp 17568 0 wct4xxp 70048 0 zaptel 226436 222 wct1xxp,wct4xxp e1000 87348 0 crc_ccitt 3072 1...

Hello all, i'm experiencing a list of unpredictables hangup on SIP phones using a PRI E100P Card. All i can see in logs is " WARNING[81931]: File chan_zap.c, Line 5402 (zt_pri_error): PRI: Read on 37 failed: Unknown error 500" I receive a lot of these errors in asterisk/messages. It doesn't seem to be strictly linked to hangups, since i have dozen of these messages per

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: p-c.gz Type: application/octet-stream Size: 11364 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20030716/396b706e/p-c.obj

...20 XT-PIC i8042 2: 0 XT-PIC cascade 5: 954609651 XT-PIC wctdm 7: 954739525 XT-PIC wctdm 10: 2858318 XT-PIC eth1 11: 32640181 XT-PIC eth0 12: 214 XT-PIC i8042 14: 954602423 XT-PIC t1xxp 15: 5550321 XT-PIC 3ware Storage Controller NMI: 0 LOC: 954781513 ERR: 0 MIS: 0 -- Med venlig hilsen / Best regards Michael L?jtnant - Systems Engineer ZyXEL Communications A/S Columbusvej 5 - 2860 S?borg Tel (+45) 3955 0700 - Fax (+45) 3955 0707

...IO-APIC-edge ide0 169: 9193 IO-APIC-level libata, uhci_hcd:usb4, eth0 177: 0 IO-APIC-level ehci_hcd:usb1 185: 0 IO-APIC-level uhci_hcd:usb2, uhci_hcd:usb5 193: 0 IO-APIC-level uhci_hcd:usb3 201: 850522 IO-APIC-level t1xxp NMI: 0 LOC: 249006 ERR: 0 MIS: 0 Is anything wrong about this? I never get 100.00 % most of the times. Thanks, Carlos Alperin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asteris...

...185 0 IO-APIC-edge PS/2 Mouse 14: 20312 2667 IO-APIC-edge libata 15: 0 0 XT-PIC libata 17: 573544 98848 IO-APIC-level Intel ICH5 18: 947385 0 IO-APIC-level eth0 21: 790815 4593392 IO-APIC-level t1xxp NMI: 0 0 LOC: 543220 543219 ERR: 0 MIS: 0 2. NetGear Switch - I'm using FS-526T Switch, which has 24 10/100 ports and 2 Gb sorts. I want to know if this kind of general purpose switch is not suitable for voip. If so, could you recommand one? 3. Se...

...O-APIC-edge timer 1: 11 IO-APIC-edge i8042 2: 0 XT-PIC cascade 15: 38 IO-APIC-edge ide1 137: 0 IO-APIC-level uhci_hcd 153: 130872 IO-APIC-level libata, eth0 161: 0 IO-APIC-level uhci_hcd 169: 39804328 IO-APIC-level t1xxp 177: 0 IO-APIC-level ehci_hcd NMI: 0 LOC: 39858292 ERR: 0 MIS: 0 Is this OK ? Thanks in advance, regards, Rob.

...79998 70983 IO-APIC-level libata 177: 16 1441995 IO-APIC-level eth0 185: 1909840 0 IO-APIC-level uhci_hcd, eth1 193: 0 0 IO-APIC-level ehci_hcd 201: 0 0 IO-APIC-level uhci_hcd 209: 27757492 28439765 IO-APIC-level t1xxp NMI: 0 0 LOC: 57954744 57954745 ERR: 0 MIS: 0 The system is not under any sort of load: [root@test ~]# uptime 13:40:53 up 15:54, 2 users, load average: 0.01, 0.05, 0.02 I tried nicing Astrisk up as far as it can go and running it with -p, however, it isn...

Hi. I'm having problems with chan_mISDN configuration. Line "echotraining=yes" causes warning, when Asterisk is parsing misdn.conf and I'm confused why the PBX doesn't accept the setting. No matter which section I try to offer it, it is always invalid or out of range. The setting itself is supposed to be valid, it is in the sample configuration file of chan_mISDN 0.3.1.

...deo, Ethernet, and serial ata all on-board, I got it because of that, there wouldn't be anything else on the pci bus that would mess with the zaptel card(s). So, here's my problem. I'm running redhat 9 with kernel 2.4.20-20.9. I can load the zaptel module fine. I can also load the wct1xxp module fine. But, after I load the wct1xxp module, I notice that the entire box just freezes for about 3 seconds every 30 seconds. Zttool sees the card fine, doesn't see any problems (other than the circuit down), and there are no irq misses. Within 3 seconds of starting *, the entire box jus...

...ing for weeks on all versions (including -stable). the T100P card appears to NOT be sharing an IRQ. xenon# cat /proc/interupts CPU0 0: 1203977 XT-PIC timer 1: 3 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 12004595 XT-PIC t1xxp 8: 1 XT-PIC rtc 9: 1046347 XT-PIC eth0 14: 21317 XT-PIC ide0 NMI: 0 ERR: 0 / Is this something I should be seeking support from Digium on being their card? Apr 12 11:04:59 WARNING[1226062640]: PRI: Short write: -1/15 (Unknown...