David Morillo
2004-Jun-12 08:57 UTC
[Asterisk-Users] Sending SABME continuosly. Urgent help needed!
Hi, I'm trying to install an E1 PRI, and I need it working by Monday, but although everything seems ok, I get no response to calls. When I make a pri extense debug on span 1, I repeatedly get the following: Sending Set Asynchronous Balanced Mode Extended [ 00 01 7f ] Unnumbered frame: SAPI: 00 C/R: 0 EA: 0 TEI: 999 EA: 1 M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended] 0 bytes of data. And nothing else. When making a call to that E1, I see the message "D-Channel on span 1 up" 4 times, and then a Informational frame, with TEI:000 EA:1 and anything else with zero (13 bytes of data). Stopping T_203 timer Starting T_200 timer Protocol Discriminator: Q.931 (8) len=13 Call Ref: len= 2 (reference 0/0x0) (Originator) Message type: RESTART (70) Channel ID (len= 5) [Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan:0 Chan Sel Reserved Ext: 1 Coding:0 Number Specified Channel Type: 3 Ext: 1 Spare: o Resetting Inidicated Channel (0) ] Then "D-Channel on span 1 downn", and finally, after a while: (...) Warning[11276]: chan_zap.c:5993 zt_pri_error: PRI: Read on 46 failed: Unknown error 500 (...) Notice[11276]: chan_zap.c:6708 pri_dchannel: PRI got event: 8 on span 1 I think I have Asterisk stable version 1.0, CVS updated today Can anyone help me? Please! :S Zaptel.conf -------------- span=1,1,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 loadzone = es defaultzone=es Zapata.conf: -------------- [channels] language=es context=default switchtype=euroisdn signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no jitterbuffers=4 group = 1 channel => 1-15,17-31 I have also tried with span=1,0,0,ccs,hdb3 immediate = yes The line has not CRC activated (I have asked) Thanks!
Steve Hanselman
2004-Jul-05 01:52 UTC
[Asterisk-Users] Sending SABME continuosly. Urgent help needed!
Hi David, Sorry for the very late reply to this, but it looks as though you're in PRI_NET rather than PRI_CPE, I believe that the network sends to a SABME and you reply with an unnumbered response, Q921 is then established? Regards Steve David Morillo wrote: Hi, I'm trying to install an E1 PRI, and I need it working by Monday, but although everything seems ok, I get no response to calls. When I make a pri extense debug on span 1, I repeatedly get the following: Sending Set Asynchronous Balanced Mode Extended [ 00 01 7f ] Unnumbered frame: SAPI: 00 C/R: 0 EA: 0 TEI: 999 EA: 1 M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended] 0 bytes of data. And nothing else. When making a call to that E1, I see the message "D-Channel on span 1 up" 4 times, and then a Informational frame, with TEI:000 EA:1 and anything else with zero (13 bytes of data). Stopping T_203 timer Starting T_200 timer Protocol Discriminator: Q.931 (8) len=13 Call Ref: len= 2 (reference 0/0x0) (Originator) Message type: RESTART (70) Channel ID (len= 5) [Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan:0 Chan Sel Reserved Ext: 1 Coding:0 Number Specified Channel Type: 3 Ext: 1 Spare: o Resetting Inidicated Channel (0) ] Then "D-Channel on span 1 downn", and finally, after a while: (...) Warning[11276]: chan_zap.c:5993 zt_pri_error: PRI: Read on 46 failed: Unknown error 500 (...) Notice[11276]: chan_zap.c:6708 pri_dchannel: PRI got event: 8 on span 1 I think I have Asterisk stable version 1.0, CVS updated today Can anyone help me? Please! :S Zaptel.conf -------------- span=1,1,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 loadzone = es defaultzone=es Zapata.conf: -------------- [channels] language=es context=default switchtype=euroisdn signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no jitterbuffers=4 group = 1 channel => 1-15,17-31 I have also tried with span=1,0,0,ccs,hdb3 immediate = yes The line has not CRC activated (I have asked) Thanks! Steve Hanselman Brendata (UK) Ltd Tel: +44 (0)1268 466111 Fax: +44 (0)870 1387283 Mob: +44 (0)7973 750993 The information contained in this email is intended for the personal and confidential use of the addressee only. It may also be privileged information. If you are not the intended recipient then you are hereby notified that you have received this document in error and that any review, distribution or copying of this document is strictly prohibited. If you have received this communication in error, please notify Brendata immediately on: +44 (0)1268 466100, or email 'technical@brendata.co.uk' Brendata (UK) Ltd Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK Registered Office as above. Registered in England No. 2764339 See our current vacancies at www.brendata.co.uk -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040705/e0dbaa5b/attachment.htm
Storer, Darren
2004-Jul-05 04:31 UTC
[Asterisk-Users] Sending SABME continuosly. Urgent help needed!
Hi David, which Telco/Carrier (type of public switch etc.) are you trying to connect Asterisk to? Also, is this a new circuit or an existing one that was previously working with other telephony hardware? Regards Darren -- Comgate Telco>Internet<Broadcast -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of David Morillo Sent: 12 June 2004 16:57 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Sending SABME continuosly. Urgent help needed! Hi, I'm trying to install an E1 PRI, and I need it working by Monday, but although everything seems ok, I get no response to calls. When I make a pri extense debug on span 1, I repeatedly get the following: Sending Set Asynchronous Balanced Mode Extended [ 00 01 7f ] Unnumbered frame: SAPI: 00 C/R: 0 EA: 0 TEI: 999 EA: 1 M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended] 0 bytes of data. And nothing else. When making a call to that E1, I see the message "D-Channel on span 1 up" 4 times, and then a Informational frame, with TEI:000 EA:1 and anything else with zero (13 bytes of data). Stopping T_203 timer Starting T_200 timer Protocol Discriminator: Q.931 (8) len=13 Call Ref: len= 2 (reference 0/0x0) (Originator) Message type: RESTART (70) Channel ID (len= 5) [Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan:0 Chan Sel Reserved Ext: 1 Coding:0 Number Specified Channel Type: 3 Ext: 1 Spare: o Resetting Inidicated Channel (0) ] Then "D-Channel on span 1 downn", and finally, after a while: (...) Warning[11276]: chan_zap.c:5993 zt_pri_error: PRI: Read on 46 failed: Unknown error 500 (...) Notice[11276]: chan_zap.c:6708 pri_dchannel: PRI got event: 8 on span 1 I think I have Asterisk stable version 1.0, CVS updated today Can anyone help me? Please! :S Zaptel.conf -------------- span=1,1,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 loadzone = es defaultzone=es Zapata.conf: -------------- [channels] language=es context=default switchtype=euroisdn signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no jitterbuffers=4 group = 1 channel => 1-15,17-31 I have also tried with span=1,0,0,ccs,hdb3 immediate = yes The line has not CRC activated (I have asked) Thanks! _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users