Displaying 20 results from an estimated 33 matches for "sabme".
Did you mean:
sabe
2014 Aug 01
1
Connecting Asterisk and BT Versatility PBX via NT BRI port
...at http://www.telephone-engineer.com/downloads/versatility/versatility-installation.pdf
Putting the pri span in debug mode I can see the following log continuously scrolling
and the PBX never synchronize with the openvox B400P card:
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to...
2011 Oct 16
0
PRI E1 call termination issue
...1000
T202: 10000
T203: 10000
T303: 4000
T305: 30000
T308: 4000
T309: 6000
T313: 4000
T-HOLD: 4000
T-RETRIEVE: 4000
T-RESPONSE: 4000
Overlap Recv: No
3. localhost*CLI> *pri set debug on span 1*
Enabled debugging on span 1
TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state
5(Awaiting establishment)
Changing from state 5(Awaiting establishment) to 4(TEI assigned)
TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
TEI=0 Sending SABME
Changing from state 4(TEI assigned) to 5(Awaiting establishment)
TEI=0 Sending SABME
TEI=0 Sending SABME
TEI=0 Sending SABME
TEI=0...
2011 Mar 18
7
One PRI card with 2 (or more) Telcos
...0
T309: 6000
T313: 4000
T-HOLD: 4000
T-RETRIEVE: 4000
T-RESPONSE: 4000
Overlap Recv: No
and
[Mar 18 17:04:05] VERBOSE[19844] chan_dahdi.c: TEI=0 MDL-ERROR (I): T200
expired N200 times sending RR/RNR in state 8(Timer recovery)
[Mar 18 17:04:05] VERBOSE[19844] chan_dahdi.c: TEI=0 Sending SABME
[Mar 18 17:04:05] VERBOSE[19844] chan_dahdi.c: Changing from state 8(Timer
recovery) to 5(Awaiting establishment)
[Mar 18 17:04:06] VERBOSE[19844] chan_dahdi.c: TEI=0 Sending SABME
[Mar 18 17:04:07] VERBOSE[19844] chan_dahdi.c: TEI=0 Sending SABME
[Mar 18 17:04:08] VERBOSE[19844] chan_dahdi.c: TEI=...
2007 Jun 06
3
1.4 Zaptel/Sangoma Issues on CentOS
...y D-Channel on span 1 up"
repeated over and over. The B channels never come up. There are no
errors in any of the logs, zttool, or the wanpipe tools.
Intense pri debug output:
< Unnumbered frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode
extended
) ]
< 0 bytes of data
-- Got SABME from network peer.
Sending Unnumbered Acknowledgement
> [ 02 01 73 ]
> Unnumbered frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement...
2010 Jun 22
3
PRI span problem - no D channel
...i_find_dchan: No
D-channels available! Using Primary channel 72 as D-channel anyway!
Here is my PRI debug span:
-- Timeout occured, restarting PRI
q921.c:468 t200_expire: q921_state now is Q921_LINK_CONNECTION_RELEASED
Sending Set Asynchronous Balanced Mode Extended
q921.c:211 q921_send_sabme: q921_state now is Q921_AWAITING_ESTABLISH
[Jun 22 09:03:48] WARNING[30723]: chan_dahdi.c:2790 pri_find_dchan: No
D-channels available! Using Primary channel 72 as D-channel anyway!
Sending Set Asynchronous Balanced Mode Extended
Sending Set Asynchronous Balanced Mode Extended
Sending Set Asyn...
2010 May 17
1
PRI down due to chan_zap.c: No more room in scheduler....Got SABME and Sending Unnumbered Acknowledgement...Any thoughts?
...hat even
that didn't work. Anyone can weigh in this please?
tail -f /var/log/asterisk/full
*[2010-05-17 13:45:28] ERROR[8212] chan_zap.c: Asked to delete sched id
-1???*
*[2010-05-17 13:45:28] ERROR[8212] chan_zap.c: No more room in scheduler*
pri debug span 1 (repeats continuously):
*-- Got SABME from network peer.*
*Sending Unnumbered Acknowledgement*
pri intense debug span 1 (repeats continuously):
*< [ 02 01 7f ]*
*pbx*CLI>*
*< Unnumbered frame:*
*< SAPI: 00 C/R: 1 EA: 0*
*< TEI: 000 EA: 1*
*< M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced m...
2004 Aug 11
1
persistant SABME
Folks,
I'm having asterisk connect to another device via an E1 PRI. However, using
"pri intense debug span 1" I'm seeing asterisk ONLY sending SABME packets.
No packets are received.
The other end is saying ISDN layer 2 is okay. Can this imply RX-errors where
the other device is ack'ing the SABME's (and hence considers layer 2
established), while asterisk isn't receiving anything in return?
Ignoring this (assuming for some wack...
2011 Jun 14
3
sig_pri.c:985 pri_find_dchan: Span 1: No D-channels available! Using Primary channel as D-channel anyway!
Dear;
Thanks a lot for guiding me.
Is it possible that the installation libpri-1.4.11.5 newer than the libpri-1.4.11.5-patch?
Well, when I typed (note: I am trying to apply the libpri-1.4.11.5-patch for the libpri-1.4.11.5):
libpri-1.4.11.5# patch -p0 -i libpri-1.4.11.5-patch
It gave me that patched detected as shown below (example of one file, and I got same for other files):
patching file
2011 Oct 19
1
Problem E1 PRI
...gt; TEI: 0 State 4(TEI assigned)
> V(A)=0, V(S)=0, V(R)=0
> K=7, RC=0, l3_initiated=1, reject_except=0, ack_pend=0
> T200_id=8192, N200=3, T203_id=0
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of data
Changing from state 4(TEI assigned) to 5(Awaiting establishment)
t200_expire
TEI: 0 State 5(Awaiting establishment)
V(A)=0, V(S)=0, V(R)=0
K=7, RC=0, l3_initiated=1, reject_except=0, ack_pend=0
T200_id=8192, N200=3, T203...
2010 May 12
1
Sangoma A101D PRI failing with ERROR - -- Got SABME from network peer. Sending Unnumbered Acknowledgement
Hi Guys,
Anyone might know why this error keeps showing up and inbound/outbound is
not working on a Bell PRI with Sangoma A101D?
-- Got SABME from network peer.
Sending Unnumbered Acknowledgement
No calls can be made inbound/outbound.
Keeps repeating. No alarms ON and no changes been made to the system.
Stopped all a sudden. Asterisk CLI doesn't show anything with full verbose
for both inbound and outbound.
pbx*CLI> pri show sp...
2005 Mar 10
7
Panasonic TDA200 E1 -> E100P negotiation issues
Hi, I hope someone can help me with this....
Asterisk 1.0.6 Zaptel 1.0.6 Libpri 1.0.6, 1 Digium E100P card installed
Panasonic TDA200 firmware v2.0.6 E1 Card Firmware 1.0.2
System is located in Australia, so as technologies go, I believe it is twist on the euro standard for the E1 signalling.
Here is the situation.
The TDA E1 card is set in cross over mode and I am using a functional
2008 May 04
1
UK BT ISDN30e PRI Problem
...and a legacy Panasonic
PBX on span 4. Upon connection of the E1 I get the following in pri
debug span 1:
Sending Unnumbered Acknowledgement
q921.c:709 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED
q921.c:664 q921_dchannel_up: q921_state now is Q921_LINK_CONNECTION_ESTABLISHED
-- Got SABME from network peer.
Sending Unnumbered Acknowledgement
q921.c:709 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED
q921.c:664 q921_dchannel_up: q921_state now is Q921_LINK_CONNECTION_ESTABLISHED
-- Got SABME from network peer.
Sending Unnumbered Acknowledgement
q921.c:709 q921_reset: q921...
2004 Jun 12
2
Sending SABME continuosly. Urgent help needed!
...sponse to calls.
When I make a pri extense debug on span 1, I repeatedly get the
following:
Sending Set Asynchronous Balanced Mode Extended
[ 00 01 7f ]
Unnumbered frame:
SAPI: 00 C/R: 0 EA: 0
TEI: 999 EA: 1
M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced
mode extended]
0 bytes of data.
And nothing else.
When making a call to that E1, I see the message "D-Channel on
span 1 up" 4 times, and then a Informational frame, with
TEI:000 EA:1 and anything else with zero...
2003 Nov 21
3
PRI problems
I've got a couple of PRIs coming in from a SUMA 4 switch with some 800
numbers routed through it.
When the calls come in, I get the following message on the console and the
call never makes it through:
(800 number is fake)
Extension '8005551212' in context 'nonauthenticated' from '232102749585'
does not exist. Rejecting the call on span 4, channel 1.
I do have the
2007 Oct 02
5
PRI Setup problem
...1
Enabled debugging on span 1
Sending Set Asynchronous Balanced Mode Extended
Sending Set Asynchronous Balanced Mode Extended
Sending Set Asynchronous Balanced Mode Extended
Periodically I see:
Sending Set Asynchronous Balanced Mode Extended
Sending Set Asynchronous Balanced Mode Extended
-- Got SABME from network peer.
Sending Unnumbered Acknowledgement
q921.c:709 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED
q921.c:664 q921_dchannel_up: q921_state now is
Q921_LINK_CONNECTION_ESTABLISHED
== Primary D-Channel on span 1 up
-- Got SABME from network peer.
Sending Unnumbered Acknow...
2010 Feb 15
0
Zaptel/DAHDI error's on PRI
...TENSIVE debugging on span 1
[Feb 15 00:49:07] Sending Set Asynchronous Balanced Mode Extended
[Feb 15 00:49:07] > [ 00 01 7f ]
[Feb 15 00:49:07] > Unnumbered frame:
[Feb 15 00:49:07] > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1
[Feb 15 00:49:07] > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous
balanced mode extended) ] > 0 bytes of data
[Feb 15 00:49:08] Sending Set Asynchronous Balanced Mode Extended
[Feb 15 00:49:08] > [ 00 01 7f ]
[Feb 15 00:49:08] > Unnumbered frame:
[Feb 15 00:49:08] > SAPI: 00 C/R: 0 EA: 0> TEI: 000 EA: 1
[Feb 15 00:49:08]...
2007 Jul 12
0
No subject
...on span 1 down
=3D=3D Primary D-Channel on span 1 up
all the time.
Telecom told us that problem is in our box.
Fast running zttest give me:
--- Results after 279 passes ---
Best: 100.000 -- Worst: 99.987 -- Average: 99.994354, Difference: =
99.994368
After enable pri debug span 1 we get
-- Got SABME from network peer.
Sending Unnumbered Acknowledgement
q921.c:782 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED
q921.c:733 q921_dchannel_up: q921_state now is =
Q921_LINK_CONNECTION_ESTABLISHED
-- Got SABME from network peer.
Sending Unnumbered Acknowledgement
q921.c:782 q921_reset: q9...
2007 Jun 28
2
E1 not coming up
...-----
Hash: SHA1
Hello List,
since some days i run into the problem that one span on a TE407P is not
comming up correctly. With intense debug on that span i get:
< [ 02 01 7f ]
< Unnumbered frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode
extended) ]
< 0 bytes of data
- -- Got SABME from network peer.
Sending Unnumbered Acknowledgement
> [ 02 01 73 ]
> Unnumbered frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgemen...
2003 Aug 18
8
PRI Question
I managed to get Asterisk working with my PBX using T1, now I am moving
on to trying to make PRI work.
I have my zaptel.conf and zapata.conf configured as follows:
Zaptel.conf:
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone=us
defaultzone=us
Zapata.conf:
[channels]
transfer=yes
immediate=yes
callprogress=yes
language=en
context=default
switchtype=national
signalling=pri_net
group=1
2003 Oct 24
2
problems setting up E100P E1 germany
...YELLOW RED
"YELLOW RED" sounds not so good.
When launching asterisk, enabling pri debug on that span, i see
outgoing attempts:
;---------- snip --------
> [00 01 7f ]
> Unnumbered frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ]
> 0 bytes of data
Sending Set Asynchronous Balanced Mode Extended
;---------- snip --------
Thats all. No reply from the net.
I thought the problem was in the telco's side, but they
double-checked everything and assure me that everything would be...