asterisk users - Jun 2004 - AVM B1 and PTP mode

Hi !

I've fetched a spare AVM B1 card from the cellar, and installed it. After 
"modprobe b1pci" I did "capiinit" and capiinit moaned about
a missing
t1.b4.

So I search the web and found one at 
http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the 
controller, I finally see p2p-mode:

 # cat /proc/capi/controllers/1
 name             b1pciv4-a400
 io               0xa400
 irq              5
 membase          0xf1800000
 type             B1 PCI
 ver_driver       3.09-10
 ver_cardtype     B1
 ver_serial       39032287
 protocol         DSS1
 linetype         point to point
 cardname         B1
 csr (cached)     0x30004000
 csr              0x30004000
 txoff            4
 txlen            0
 rxoff            0
 rxlen            4

Now, I compiled chan_capi-0.3.3 against Asterisk CVS head (of course with 
CFLAGS+=-DUNSTABLE_CVS). And when I start now asterisk, .... it hangs.

With some debugging statements I found out that it hangs right here in 
chan_capi.c:

        if (Listen(ALL_SERVICES) != 0) {
            ast_log(LOG_NOTICE,"unable to listen!\n");
            return -1;
        }

Any ideas?

Hallo Holger Schurig
On Mon, 7 Jun 2004 17:08:53 +0200 you wrote:
> Hi !
> 
> I've fetched a spare AVM B1 card from the cellar, and installed it.
> After "modprobe b1pci" I did "capiinit" and capiinit
moaned about a
> missing t1.b4.
Dont use modprobe, use "capiinit start" !!!!!!!!!!!!!!!!!
Configure the card via /etc/isdn/capi.conf
The capiinit will do all the rest :)
> 
> So I search the web and found one at 
> http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the 
> controller, I finally see p2p-mode:
Get latest Firmware from:
ftp://ftp.in-berlin.de/pub/capi4linux/firmware/b1/3-11-03/
> 
>  # cat /proc/capi/controllers/1
>  name             b1pciv4-a400
>  io               0xa400
>  irq              5
>  membase          0xf1800000
>  type             B1 PCI
>  ver_driver       3.09-10
>  ver_cardtype     B1
>  ver_serial       39032287
>  protocol         DSS1
>  linetype         point to point
>  cardname         B1
>  csr (cached)     0x30004000
>  csr              0x30004000
>  txoff            4
>  txlen            0
>  rxoff            0
>  rxlen            4
> 
> Now, I compiled chan_capi-0.3.3 against Asterisk CVS head (of course
> with CFLAGS+=-DUNSTABLE_CVS). And when I start now asterisk, .... it
> hangs.
> 
> With some debugging statements I found out that it hangs right here in 
> chan_capi.c:
> 
>         if (Listen(ALL_SERVICES) != 0) {
>             ast_log(LOG_NOTICE,"unable to listen!\n");
>             return -1;
>         }
> 
> Any ideas?
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 

-- 
Tho/\/\as