Has anyone got the BT Speedway (AVM Fritz) card working on a RedHat 8.0 system with *. If so could someone give me some pointers on getting the right sequence of installing the drivers and which versions to use. Thanks, Stuart -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030727/29e70676/attachment.htm
Assuming it is a suitable Fritz card your best bet is to get the CAPI library/driver from AVM and then check this out <http://www.junghanns.net/asterisk/> - chan_capi is reportedly the best performing ISDN channel driver for asterisk, although I personally haven't used it ;-) Iain --On Sunday, July 27, 2003 8:25 pm +0100 Stuart Hirst <shirst@easynet.co.uk> wrote:> > Has anyone got the BT Speedway (AVM Fritz) card working on a RedHat 8.0 > system with *. > If so could someone give me some pointers on getting the right sequence > of installing the drivers and which versions to use. > > Thanks, > > Stuart
MessageAll you really should need is: modprobe hisax type=27 protocol=2 id=isdn0 and in modem.conf: driver=aopen driver=i4l type=i4l ; ISDN example ; group=1 msn=xxxxxxx device => /dev/ttyI0 device => /dev/ttyI1 Has anyone got the BT Speedway (AVM Fritz) card working on a RedHat 8.0 system with *. If so could someone give me some pointers on getting the right sequence of installing the drivers and which versions to use. Thanks, Stuart -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030728/6d8e4445/attachment.htm
I have set one up on RH9 but I am sure the process is the same.. its not very well documented I am afraid.. Basically download the CAPI drivers from the AVM site.. Extract them and then run "make" and then "make install".. Make sure you have the ISDN tools loaded.. Create a file in etc called capi.conf and put the following line into it.. fcpci - - - - - - Save it and then try capiinit start.. It will complain that the module will taint the kernel but it still works.. then to verify its loaded run "capiinfo" Hope that helps..> Has anyone got the BT Speedway (AVM Fritz) card working on a RedHat 8.0 > system with *. > > If so could someone give me some pointers on getting the right sequence > of installing the drivers and which versions to use. > > Thanks, > > Stuart-- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze
The ISDN tools are in the package isdn4kutils.. Not sure about the error you are getting when you run "make" do you have the kernel-source installed?> I would like to use the CAPI drivers and I have downloaded the drivers > from the AVM site but when I do a "make" in the fritz directory it exits > with : > > make[1]: *** [tools.o] Error 1 > make[1]: Leaving directory `/usr/src/fritz/src.drv' > make: *** [drv] Error 2 > > I guess that this is because I don't have ISDN tools loaded correctly. I > have tried "modprobe isdn" but there is still not difference. > > How do I make sure that I have the ISDN tools loaded correctly ? > > Does the standard RH 8.0 kernel have precompiled the right options ? > > Thanks for your help. > > Stuart > > -----Original Message----- > From: asterisk-users-admin@lists.digium.com > [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of WipeOut . > Sent: 28 July 2003 08:01 > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] ISDN Fritz & RedHat 8.0 > > > I have set one up on RH9 but I am sure the process is the same.. its not > very well documented I am afraid.. > > Basically download the CAPI drivers from the AVM site.. > > Extract them and then run "make" and then "make install".. > > Make sure you have the ISDN tools loaded.. > > Create a file in etc called capi.conf and put the following line into > it.. > fcpci - - - - - - > > Save it and then try capiinit start.. > > It will complain that the module will taint the kernel but it still > works.. > > then to verify its loaded run "capiinfo" > > Hope that helps.. > > > > Has anyone got the BT Speedway (AVM Fritz) card working on a RedHat > > 8.0 system with *. > > > > If so could someone give me some pointers on getting the right > > sequence of installing the drivers and which versions to use. > > > > Thanks, > > > > Stuart > > -- > ______________________________________________ > http://www.linuxmail.org/ > Now with e-mail forwarding for only US$5.95/yr > > Powered by Outblaze _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users-- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze