Displaying 4 results from an estimated 4 matches for "ver_driver".
Did you mean:
eeh_driver
2004 Jun 07
1
AVM B1 and PTP mode
...ch the web and found one at
http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the
controller, I finally see p2p-mode:
# cat /proc/capi/controllers/1
name b1pciv4-a400
io 0xa400
irq 5
membase 0xf1800000
type B1 PCI
ver_driver 3.09-10
ver_cardtype B1
ver_serial 39032287
protocol DSS1
linetype point to point
cardname B1
csr (cached) 0x30004000
csr 0x30004000
txoff 4
txlen 0
rxoff 0
rxlen 4
Now, I compiled chan_...
2003 Nov 19
1
fritz pci / chan_capi / australia setup
...probe hisax
I now have incoming calls working OK and working on getting outgoing
working.
Stuart
<-
OK, so I have some good signs:
forge:/etc/asterisk# cat /proc/capi/controllers/1
name fritz-pci
io 0xD400
irq 10
type A1
class 14
ver_driver 3.09-10
ver_cardtype fritz-pci
protocol DSS1
linetype point to multipoint
forge:/etc/asterisk#
*CLI> capi info
Contr1: 2 B channels total, 2 B channels free.
*CLI>
I've set up capi.conf as best I can:
forge:/etc/asterisk# grep -v ^\; capi.conf | grep -v ^$
[gen...
2004 Jun 07
6
chan_capi and DDI (Anlagenanschluss)
Hi all !
We have 3 NTBAs which are all going to our existing PBX. Our areacode is
06003 and our DDI enabled number 9141.
I want to exchange that PBX with Asterisk, but still struggle to get it
working.
My CAPI.CONF is currently like this:
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.800000
txgain=0.800000
[interfaces]
context=in-capi
msn=60039141
incomingmsn=*
controller=1
2004 Dec 13
3
Busy message on ISDN cards?
Hi all,
I'm new to asterisk and not too knowledgeable on ISDN, so please be gentle :)
I have a dual-channel Eicon Diehl Diva card in a Debian Woody box with
kernel 2.4.27, connecting to a Telstra (Australia) Onramp Home Highway
ISDN line. I'm pretty certain the card and line both work since
they've been used in this machine for PPP before this (but with an
older kernel with DoV